ich777/linux_media
1
0
Fork 0
mirror of https://github.com/tbsdtv/linux_media.git synced 2025-07-23 12:43:29 +02:00
Code Issues Packages Projects Releases Wiki Activity

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Browse Source 
Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...
This commit is contained in:
Linus Torvalds
2020-10-24 10:44:18 -07:00
parent 2e368dd2bb 098bfcec1b
commit e533cda12d
660 changed files with 28229 additions and 6835 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
Documentation/devicetree/bindings/arm/actions.yaml
View File

@@ -20,6 +20,12 @@ properties:
- enum:
- allo,sparky # Allo.com Sparky
- cubietech,cubieboard6 # Cubietech CubieBoard6
- roseapplepi,roseapplepi # RoseapplePi.org RoseapplePi
- const: actions,s500
- items:
- enum:
- caninos,labrador-base-m # Labrador Base Board M v1
- const: caninos,labrador-v2 # Labrador Core v2
- const: actions,s500
- items:
- enum:
@@ -28,6 +34,11 @@ properties:
- const: actions,s500
# The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
- items:
- enum:
- caninos,labrador-base-m2 # Labrador Base Board M v2
- const: caninos,labrador-v3 # Labrador Core v3
- const: actions,s700
- items:
- enum:
- cubietech,cubieboard7 # Cubietech CubieBoard7

2
Documentation/devicetree/bindings/arm/amlogic.yaml
View File

@@ -96,6 +96,7 @@ properties:
- hwacom,amazetv
- khadas,vim
- libretech,aml-s905x-cc
- libretech,aml-s905x-cc-v2
- nexbox,a95x
- const: amlogic,s905x
- const: amlogic,meson-gxl
@@ -153,6 +154,7 @@ properties:
- azw,gtking
- azw,gtking-pro
- hardkernel,odroid-n2
- hardkernel,odroid-n2-plus
- khadas,vim3
- ugoos,am6
- const: amlogic,s922x

1
Documentation/devicetree/bindings/arm/atmel-at91.yaml
View File

@@ -41,6 +41,7 @@ properties:
- overkiz,kizboxmini-mb # Overkiz kizbox Mini Mother Board
- overkiz,kizboxmini-rd # Overkiz kizbox Mini RailDIN
- overkiz,smartkiz # Overkiz SmartKiz Board
- gardena,smart-gateway-at91sam # GARDENA smart Gateway (Article No. 19000)
- const: atmel,at91sam9g25
- const: atmel,at91sam9x5
- const: atmel,at91sam9

2
Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
View File

@@ -83,6 +83,8 @@ properties:
- brcm,bcm953012er
- brcm,bcm953012hr
- brcm,bcm953012k
- meraki,mr32
- const: brcm,brcm53012
- const: brcm,brcm53016
- const: brcm,bcm4708
...

95
Documentation/devicetree/bindings/arm/fsl.yaml
View File

@@ -120,6 +120,7 @@ properties:
- fsl,imx6q-sabrelite
- fsl,imx6q-sabresd
- kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module
- logicpd,imx6q-logicpd
- prt,prti6q # Protonic PRTI6Q board
- prt,prtwd2 # Protonic WD2 board
- technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf
@@ -156,6 +157,21 @@ properties:
- const: gw,ventana
- const: fsl,imx6q
- description: i.MX6Q PHYTEC phyBOARD-Mira
items:
- enum:
- phytec,imx6q-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
- phytec,imx6q-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
- const: phytec,imx6q-pbac06 # PHYTEC phyBOARD-Mira
- const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
- const: fsl,imx6q
- description: i.MX6Q PHYTEC phyFLEX-i.MX6
items:
- const: phytec,imx6q-pbab01 # PHYTEC phyFLEX carrier board
- const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
- const: fsl,imx6q
- description: i.MX6QP based Boards
items:
- enum:
@@ -163,6 +179,13 @@ properties:
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp
- description: i.MX6QP PHYTEC phyBOARD-Mira
items:
- const: phytec,imx6qp-pbac06-nand
- const: phytec,imx6qp-pbac06 # PHYTEC phyBOARD-Mira
- const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
- const: fsl,imx6qp
- description: i.MX6DL based Boards
items:
- enum:
@@ -188,6 +211,7 @@ properties:
- toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3
- ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board
- ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board
- ysoft,imx6dl-yapp4-orion # i.MX6 DualLite Y Soft IOTA Orion board
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
@@ -211,10 +235,26 @@ properties:
- const: gw,ventana
- const: fsl,imx6dl
- description: i.MX6DL PHYTEC phyBOARD-Mira
items:
- enum:
- phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
- phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
- const: phytec,imx6dl-pbac06 # PHYTEC phyBOARD-Mira
- const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
- const: fsl,imx6dl
- description: i.MX6DL PHYTEC phyFLEX-i.MX6
items:
- const: phytec,imx6dl-pbab01 # PHYTEC phyFLEX carrier board
- const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
- const: fsl,imx6dl
- description: i.MX6SL based Boards
items:
- enum:
- fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
- kobo,tolino-shine2hd
- kobo,tolino-shine3
- const: fsl,imx6sl
@@ -246,6 +286,15 @@ properties:
- technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi
- const: fsl,imx6ul
- description: i.MX6UL PHYTEC phyBOARD-Segin
items:
- enum:
- phytec,imx6ul-pbacd10-emmc
- phytec,imx6ul-pbacd10-nand
- const: phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL
- const: phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL
- const: fsl,imx6ul
- description: Kontron N6310 S Board
items:
- const: kontron,imx6ul-n6310-s
@@ -277,6 +326,15 @@ properties:
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
- const: fsl,imx6ull
- description: i.MX6ULL PHYTEC phyBOARD-Segin
items:
- enum:
- phytec,imx6ull-pbacd10-emmc
- phytec,imx6ull-pbacd10-nand
- const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL
- const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL
- const: fsl,imx6ull
- description: Kontron N6411 S Board
items:
- const: kontron,imx6ull-n6411-s
@@ -344,7 +402,16 @@ properties:
- description: i.MX8MM based Boards
items:
- enum:
- beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
- variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- const: fsl,imx8mm
- description: Variscite VAR-SOM-MX8MM based boards
items:
- const: variscite,var-som-mx8mm-symphony
- const: variscite,var-som-mx8mm
- const: fsl,imx8mm
- description: i.MX8MN based Boards
@@ -354,6 +421,12 @@ properties:
- fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board
- const: fsl,imx8mn
- description: Variscite VAR-SOM-MX8MN based boards
items:
- const: variscite,var-som-mx8mn-symphony
- const: variscite,var-som-mx8mn
- const: fsl,imx8mn
- description: i.MX8MP based Boards
items:
- enum:
@@ -372,13 +445,35 @@ properties:
- technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk
- const: fsl,imx8mq
- description: Purism Librem5 phones
items:
- enum:
- purism,librem5r2 # Purism Librem5 phone "Chestnut"
- purism,librem5r3 # Purism Librem5 phone "Dogwood"
- const: purism,librem5
- const: fsl,imx8mq
- description: Zodiac Inflight Innovations Ultra Boards
items:
- enum:
- zii,imx8mq-ultra-rmb3
- zii,imx8mq-ultra-zest
- const: zii,imx8mq-ultra
- const: fsl,imx8mq
- description: i.MX8QXP based Boards
items:
- enum:
- einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board
- fsl,imx8qxp-mek # i.MX8QXP MEK Board
- toradex,colibri-imx8x # Colibri iMX8X Module
- const: fsl,imx8qxp
- description: Toradex Colibri i.MX8 Evaluation Board
items:
- enum:
- toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
- const: toradex,colibri-imx8x
- const: fsl,imx8qxp
- description:

11
Documentation/devicetree/bindings/arm/qcom.yaml
View File

@@ -40,6 +40,7 @@ description: |
sdm630
sdm660
sdm845
sm8250
The 'board' element must be one of the following strings:
@@ -47,6 +48,8 @@ description: |
cp01-c1
dragonboard
hk01
hk10-c1
hk10-c2
idp
liquid
mtp
@@ -150,6 +153,8 @@ properties:
- items:
- enum:
- qcom,ipq8074-hk01
- qcom,ipq8074-hk10-c1
- qcom,ipq8074-hk10-c2
- const: qcom,ipq8074
- items:
@@ -167,4 +172,10 @@ properties:
- qcom,ipq6018-cp01-c1
- const: qcom,ipq6018
- items:
- enum:
- qcom,qrb5165-rb5
- qcom,sm8250-mtp
- const: qcom,sm8250
...

12
Documentation/devicetree/bindings/arm/renesas.yaml
View File

@@ -281,6 +281,18 @@ properties:
- renesas,draak # Draak (RTP0RC77995SEB0010S)
- const: renesas,r8a77995
- description: R-Car V3U (R8A779A0)
items:
- enum:
- renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
- const: renesas,r8a779a0
- items:
- enum:
- renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
- const: renesas,falcon-cpu
- const: renesas,r8a779a0
- description: RZ/N1D (R9A06G032)
items:
- enum:

16
Documentation/devicetree/bindings/arm/rockchip.yaml
View File

@@ -104,6 +104,11 @@ properties:
- firefly,roc-rk3399-pc-mezzanine
- const: rockchip,rk3399
- description: FriendlyElec NanoPi R2S
items:
- const: friendlyarm,nanopi-r2s
- const: rockchip,rk3328
- description: FriendlyElec NanoPi4 series boards
items:
- enum:
@@ -430,8 +435,12 @@ properties:
- const: radxa,rock
- const: rockchip,rk3188
- description: Radxa ROCK Pi 4
- description: Radxa ROCK Pi 4A/B/C
items:
- enum:
- radxa,rockpi4a
- radxa,rockpi4b
- radxa,rockpi4c
- const: radxa,rockpi4
- const: rockchip,rk3399
@@ -555,4 +564,9 @@ properties:
items:
- const: tronsmart,orion-r68-meta
- const: rockchip,rk3368
- description: Zkmagic A95X Z2
items:
- const: zkmagic,a95x-z2
- const: rockchip,rk3318
...

24
Documentation/devicetree/bindings/arm/samsung/pmu.yaml
View File

@@ -24,6 +24,7 @@ select:
- samsung,exynos5420-pmu
- samsung,exynos5433-pmu
- samsung,exynos7-pmu
- samsung-s5pv210-pmu
required:
- compatible
@@ -40,6 +41,7 @@ properties:
- samsung,exynos5420-pmu
- samsung,exynos5433-pmu
- samsung,exynos7-pmu
- samsung-s5pv210-pmu
- const: syscon
reg:
@@ -88,12 +90,28 @@ properties:
required:
- compatible
- reg
- '#clock-cells'
- clock-names
- clocks
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5410-pmu
- samsung,exynos5420-pmu
- samsung,exynos5433-pmu
then:
required:
- '#clock-cells'
- clock-names
- clocks
examples:
- |
#include <dt-bindings/clock/exynos5250.h>

6
Documentation/devicetree/bindings/arm/stm32/stm32.yaml
View File

@@ -52,4 +52,10 @@ properties:
- const: st,stm32mp157c-ev1
- const: st,stm32mp157c-ed1
- const: st,stm32mp157
- description: Odyssey STM32MP1 SoM based Boards
items:
- enum:
- seeed,stm32mp157c-odyssey
- const: seeed,stm32mp157c-odyssey-som
- const: st,stm32mp157
...

10
Documentation/devicetree/bindings/arm/sunxi.yaml
View File

@@ -16,6 +16,11 @@ properties:
compatible:
oneOf:
- description: Allwinner A100 Perf1 Board
items:
- const: allwinner,a100-perf1
- const: allwinner,sun50i-a100
- description: Allwinner A23 Evaluation Board
items:
- const: allwinner,sun8i-a23-evb
@@ -626,6 +631,11 @@ properties:
- const: pine64,pine64-plus
- const: allwinner,sun50i-a64
- description: Pine64 PineCube
items:
- const: pine64,pinecube
- const: allwinner,sun8i-s3
- description: Pine64 PineH64 model A
items:
- const: pine64,pine-h64

4
Documentation/devicetree/bindings/arm/tegra.yaml
View File

@@ -121,3 +121,7 @@ properties:
items:
- const: nvidia,p3509-0000+p3668-0000
- const: nvidia,tegra194
- items:
- enum:
- nvidia,tegra234-vdk
- const: nvidia,tegra234

3
Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
View File

@@ -4,6 +4,7 @@ Required properties:
- compatible: Should contain one of the following:
- "nvidia,tegra186-pmc": for Tegra186
- "nvidia,tegra194-pmc": for Tegra194
- "nvidia,tegra234-pmc": for Tegra234
- reg: Must contain an (offset, length) pair of the register set for each
entry in reg-names.
- reg-names: Must include the following entries:
@@ -11,7 +12,7 @@ Required properties:
- "wake"
- "aotag"
- "scratch"
- "misc" (Only for Tegra194)
- "misc" (Only for Tegra194 and later)
Optional properties:
- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.

26
Documentation/devicetree/bindings/arm/ti/k3.txt
View File

@@ -1,26 +0,0 @@
Texas Instruments K3 Multicore SoC architecture device tree bindings
--------------------------------------------------------------------
Platforms based on Texas Instruments K3 Multicore SoC architecture
shall follow the following scheme:
SoCs
----
Each device tree root node must specify which exact SoC in K3 Multicore SoC
architecture it uses, using one of the following compatible values:
- AM654
compatible = "ti,am654";
- J721E
compatible = "ti,j721e";
Boards
------
In addition, each device tree root node must specify which one or more
of the following board-specific compatible values:
- AM654 EVM
compatible = "ti,am654-evm", "ti,am654";

35
Documentation/devicetree/bindings/arm/ti/k3.yaml Normal file
View File

@@ -0,0 +1,35 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments K3 Multicore SoC architecture device tree bindings
maintainers:
- Nishanth Menon <nm@ti.com>
description: |
Platforms based on Texas Instruments K3 Multicore SoC architecture
shall have the following properties.
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: K3 AM654 SoC
items:
- enum:
- ti,am654-evm
- const: ti,am654
- description: K3 J721E SoC
items:
- const: ti,j721e
- description: K3 J7200 SoC
items:
- const: ti,j7200
...

22
Documentation/devicetree/bindings/arm/toshiba.yaml Normal file
View File

@@ -0,0 +1,22 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/toshiba.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Toshiba Visconti Platform Device Tree Bindings
maintainers:
- Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: Visconti5 TMPV7708
items:
- enum:
- toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board
- const: toshiba,tmpv7708
...

6
Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
View File

@@ -23,7 +23,9 @@ properties:
- items:
- const: allwinner,sun7i-a20-crypto
- const: allwinner,sun4i-a10-crypto
- const: allwinner,sun8i-a33-crypto
- items:
- const: allwinner,sun8i-v3s-crypto
- const: allwinner,sun8i-a33-crypto
reg:
@@ -59,7 +61,9 @@ if:
properties:
compatible:
contains:
const: allwinner,sun6i-a31-crypto
enum:
- allwinner,sun6i-a31-crypto
- allwinner,sun8i-a33-crypto
then:
required:

9
Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
View File

@@ -19,9 +19,12 @@ properties:
description: The cell is the request line number.
compatible:
enum:
- allwinner,sun50i-a64-dma
- allwinner,sun50i-h6-dma
oneOf:
- const: allwinner,sun50i-a64-dma
- const: allwinner,sun50i-h6-dma
- items:
- const: allwinner,sun8i-r40-dma
- const: allwinner,sun50i-a64-dma
reg:
maxItems: 1

1
Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
View File

@@ -7,6 +7,7 @@ Required properties:
For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
"nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
For Tegra234 must contain "nvidia,tegra234-efuse".
Details:
nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
due to a hardware bug. Tegra20 also lacks certain information which is

2
Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
View File

@@ -25,6 +25,7 @@ properties:
- allwinner,sun4i-a10-mali
- allwinner,sun7i-a20-mali
- allwinner,sun8i-h3-mali
- allwinner,sun8i-r40-mali
- allwinner,sun50i-a64-mali
- rockchip,rk3036-mali
- rockchip,rk3066-mali
@@ -131,6 +132,7 @@ allOf:
enum:
- allwinner,sun4i-a10-mali
- allwinner,sun7i-a20-mali
- allwinner,sun8i-r40-mali
- allwinner,sun50i-a64-mali
- allwinner,sun50i-h5-mali
- amlogic,meson8-mali

5
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
View File

@@ -29,10 +29,13 @@ properties:
- items:
- const: allwinner,sun8i-a83t-r-intc
- const: allwinner,sun6i-a31-r-intc
- const: allwinner,sun9i-a80-sc-nmi
- const: allwinner,sun9i-a80-nmi
- items:
- const: allwinner,sun50i-a64-r-intc
- const: allwinner,sun6i-a31-r-intc
- items:
- const: allwinner,sun50i-a100-nmi
- const: allwinner,sun9i-a80-nmi
- items:
- const: allwinner,sun50i-h6-r-intc
- const: allwinner,sun6i-a31-r-intc

1
Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
View File

@@ -16,6 +16,7 @@ maintainers:
properties:
compatible:
enum:
- qcom,ipq6018-apcs-apps-global
- qcom,ipq8074-apcs-apps-global
- qcom,msm8916-apcs-kpss-global
- qcom,msm8994-apcs-kpss-global

5
Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
View File

@@ -18,10 +18,13 @@ properties:
oneOf:
- const: allwinner,sun4i-a10-ir
- const: allwinner,sun5i-a13-ir
- const: allwinner,sun6i-a31-ir
- items:
- const: allwinner,sun8i-a83t-ir
- const: allwinner,sun6i-a31-ir
- const: allwinner,sun6i-a31-ir
- items:
- const: allwinner,sun8i-r40-ir
- const: allwinner,sun6i-a31-ir
- items:
- const: allwinner,sun50i-a64-ir
- const: allwinner,sun6i-a31-ir

8
Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
View File

@@ -1,11 +1,13 @@
NVIDIA Tegra186 MISC register block
NVIDIA Tegra186 (and later) MISC register block
The MISC register block found on Tegra186 SoCs contains registers that can be
used to identify a given chip and various strapping options.
The MISC register block found on Tegra186 and later SoCs contains registers
that can be used to identify a given chip and various strapping options.
Required properties:
- compatible: Must be:
- Tegra186: "nvidia,tegra186-misc"
- Tegra194: "nvidia,tegra194-misc"
- Tegra234: "nvidia,tegra234-misc"
- reg: Should contain 2 entries: The first entry gives the physical address
and length of the register region which contains revision and debug
features. The second entry specifies the physical address and length

13
Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
View File

@@ -1,10 +1,13 @@
NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
NVIDIA Tegra APBMISC block
Required properties:
- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc". For Tegra30,
must be "nvidia,tegra30-apbmisc". Otherwise, must contain
"nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
tegra124, tegra132.
- compatible: Must be:
- Tegra20: "nvidia,tegra20-apbmisc"
- Tegra30: "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"
- Tegra114: "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"
- Tegra124: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
- Tegra132: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
- Tegra210: "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"
- reg: Should contain 2 entries: the first entry gives the physical address
and length of the registers which contain revision and debug features.
The second entry gives the physical address and length of the

4
Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
View File

@@ -2,7 +2,7 @@ On-Chip OTP Memory for Freescale Vybrid
Required Properties:
compatible:
- "fsl,vf610-ocotp" for VF5xx/VF6xx
- "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
#address-cells : Should be 1
#size-cells : Should be 1
reg : Address and length of OTP controller and fuse map registers
@@ -11,7 +11,7 @@ Required Properties:
Example for Vybrid VF5xx/VF6xx:
ocotp: ocotp@400a5000 {
compatible = "fsl,vf610-ocotp";
compatible = "fsl,vf610-ocotp", "syscon";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x400a5000 0xCF0>;

1
Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
View File

@@ -40,6 +40,7 @@ properties:
- renesas,r8a77980-sysc # R-Car V3H
- renesas,r8a77990-sysc # R-Car E3
- renesas,r8a77995-sysc # R-Car D3
- renesas,r8a779a0-sysc # R-Car V3U
reg:
maxItems: 1

1
Documentation/devicetree/bindings/reset/renesas,rst.yaml
View File

@@ -47,6 +47,7 @@ properties:
- renesas,r8a77980-rst # R-Car V3H
- renesas,r8a77990-rst # R-Car E3
- renesas,r8a77995-rst # R-Car D3
- renesas,r8a779a0-rst # R-Car V3U
reg:
maxItems: 1

6
Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
View File

@@ -33,6 +33,9 @@ properties:
- const: allwinner,sun4i-a10-system-control
- const: allwinner,sun8i-a23-system-control
- const: allwinner,sun8i-h3-system-control
- items:
- const: allwinner,sun8i-r40-system-control
- const: allwinner,sun4i-a10-system-control
- const: allwinner,sun50i-a64-sram-controller
deprecated: true
- const: allwinner,sun50i-a64-system-control
@@ -86,6 +89,9 @@ patternProperties:
- items:
- const: allwinner,sun8i-h3-sram-c1
- const: allwinner,sun4i-a10-sram-c1
- items:
- const: allwinner,sun8i-r40-sram-c1
- const: allwinner,sun4i-a10-sram-c1
- items:
- const: allwinner,sun50i-a64-sram-c1
- const: allwinner,sun4i-a10-sram-c1

8
Documentation/devicetree/bindings/vendor-prefixes.yaml
View File

@@ -179,6 +179,8 @@ patternProperties:
description: CALAO Systems SAS
"^calxeda,.*":
description: Calxeda
"^caninos,.*":
description: Caninos Loucos Program
"^capella,.*":
description: Capella Microsystems, Inc
"^cascoda,.*":
@@ -912,6 +914,8 @@ patternProperties:
description: Ronbo Electronics
"^roofull,.*":
description: Shenzhen Roofull Technology Co, Ltd
"^roseapplepi,.*":
description: RoseapplePi.org
"^samsung,.*":
description: Samsung Semiconductor
"^samtec,.*":
@@ -928,6 +932,8 @@ patternProperties:
description: Schindler
"^seagate,.*":
description: Seagate Technology PLC
"^seeed,.*":
description: Seeed Technology Co., Ltd
"^seirobotics,.*":
description: Shenzhen SEI Robotics Co., Ltd
"^semtech,.*":
@@ -1224,6 +1230,8 @@ patternProperties:
description: Zodiac Inflight Innovations
"^zinitix,.*":
description: Zinitix Co., Ltd
"^zkmagic,.*":
description: Shenzhen Zkmagic Technology Co., Ltd.
"^zte,.*":
description: ZTE Corp.
"^zyxel,.*":

18
MAINTAINERS
View File

@@ -2115,6 +2115,7 @@ M: Steen Hegelund <Steen.Hegelund@microchip.com>
M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
T: git git://github.com/microchip-ung/linux-upstream.git
F: arch/arm64/boot/dts/microchip/
N: sparx5
@@ -2130,9 +2131,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
W: http://linux-chenxing.org/
F: Documentation/devicetree/bindings/arm/mstar/*
F: arch/arm/boot/dts/infinity*.dtsi
F: arch/arm/boot/dts/mercury*.dtsi
F: arch/arm/boot/dts/mstar-v7.dtsi
F: arch/arm/boot/dts/mstar-*
F: arch/arm/mach-mstar/
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
@@ -2616,7 +2615,7 @@ M: Tero Kristo <t-kristo@ti.com>
M: Nishanth Menon <nm@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/arm/ti/k3.txt
F: Documentation/devicetree/bindings/arm/ti/k3.yaml
F: arch/arm64/boot/dts/ti/Makefile
F: arch/arm64/boot/dts/ti/k3-*
F: include/dt-bindings/pinctrl/k3.h
@@ -2631,6 +2630,17 @@ M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
ARM/TOSHIBA VISCONTI ARCHITECTURE
M: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git
F: Documentation/devicetree/bindings/arm/toshiba.yaml
F: Documentation/devicetree/bindings/pinctrl/toshiba,tmpv7700-pinctrl.yaml
F: arch/arm64/boot/dts/toshiba/
F: drivers/pinctrl/visconti/
N: visconti
ARM/UNIPHIER ARCHITECTURE
M: Masahiro Yamada <yamada.masahiro@socionext.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

25
arch/arm/boot/dts/Makefile
View File

@@ -43,6 +43,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91-smartkiz.dtb \
at91-wb45n.dtb \
at91sam9g15ek.dtb \
at91sam9g25-gardena-smart-gateway.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
@@ -127,6 +128,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
bcm47094-phicomm-k3.dtb \
bcm53016-meraki-mr32.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
@@ -357,6 +359,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \
mps2-an399.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_SD5203) += \
sd5203.dtb
dtb-$(CONFIG_SOC_IMX1) += \
imx1-ads.dtb \
imx1-apf9328.dtb
@@ -482,6 +486,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-wandboard-revd1.dtb \
imx6dl-yapp4-draco.dtb \
imx6dl-yapp4-hydra.dtb \
imx6dl-yapp4-orion.dtb \
imx6dl-yapp4-ursa.dtb \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
@@ -531,6 +536,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-icore-ofcap12.dtb \
imx6q-icore-rqs.dtb \
imx6q-kp-tpc.dtb \
imx6q-logicpd.dtb \
imx6q-marsboard.dtb \
imx6q-mccmon6.dtb \
imx6q-nitrogen6x.dtb \
@@ -585,6 +591,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-tolino-shine2hd.dtb \
imx6sl-tolino-shine3.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SLL) += \
@@ -868,7 +875,12 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
dtb-$(CONFIG_ARCH_ACTIONS) += \
owl-s500-cubieboard6.dtb \
owl-s500-guitar-bb-rev-b.dtb \
owl-s500-labrador-base-m.dtb \
owl-s500-roseapplepi.dtb \
owl-s500-sparky.dtb
dtb-$(CONFIG_ARCH_PICOXCELL) += \
picoxcell-pc7302-pc3x2.dtb \
picoxcell-pc7302-pc3x3.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_PXA) += \
@@ -1047,6 +1059,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
stm32mp153c-dhcom-drc02.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dhcor-avenger96.dtb \
stm32mp157a-dk1.dtb \
@@ -1056,7 +1069,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb \
stm32mp157c-lxa-mc1.dtb
stm32mp157c-lxa-mc1.dtb \
stm32mp157c-odyssey.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
@@ -1194,6 +1208,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
sun8i-t3-cqa3t-bv3.dtb \
sun8i-v3s-licheepi-zero.dtb \
sun8i-v3s-licheepi-zero-dock.dtb \
@@ -1356,9 +1371,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_MSTARV7) += \
infinity-msc313-breadbee_crust.dtb \
infinity3-msc313e-breadbee.dtb \
mercury5-ssc8336n-midrived08.dtb
mstar-infinity-msc313-breadbee_crust.dtb \
mstar-infinity3-msc313e-breadbee.dtb \
mstar-mercury5-ssc8336n-midrived08.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
@@ -1371,6 +1386,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
aspeed-bmc-facebook-wedge400.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-ibm-rainier.dtb \
@@ -1381,6 +1397,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-mihawk.dtb \
aspeed-bmc-opp-mowgli.dtb \
aspeed-bmc-opp-nicole.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \

2
arch/arm/boot/dts/alpine.dtsi
View File

@@ -91,7 +91,7 @@
};
/* Interrupt Controller */
gic: gic@fb001000 {
gic: interrupt-controller@fb001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#size-cells = <0>;

4
arch/arm/boot/dts/am335x-lxm.dts
View File

@@ -160,11 +160,15 @@
serial_config1: serial_config1@20 {
compatible = "nxp,pca9539";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
serial_config2: serial_config2@21 {
compatible = "nxp,pca9539";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
tps: tps@2d {

427
arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi Normal file
View File

@@ -0,0 +1,427 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/
*
* Author: Johnson Chen <johnsonch.chen@moxa.com>
*/
#include "am33xx.dtsi"
/ {
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
vbat: vbat-regulator {
compatible = "regulator-fixed";
};
/* Power supply provides a fixed 3.3V @3A */
vmmcsd_fixed: vmmcsd-regulator {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
buttons: push_button {
compatible = "gpio-keys";
};
};
&am33xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&minipcie_pins>;
minipcie_pins: pinmux_minipcie {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */
AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
>;
};
push_button_pins: pinmux_push_button {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */
AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */
AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */
AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */
AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
/* Slave 2 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
mmc0_pins_default: pinmux_mmc0_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
>;
};
mmc2_pins_default: pinmux_mmc2_pins {
pinctrl-single,pins = <
/* eMMC */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
>;
};
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
};
&uart0 {
/* Console */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
};
&uart1 {
/* UART 1 setting */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
};
&uart5 {
/* UART 2 setting */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;
tps: tps@2d {
compatible = "ti,tps65910";
reg = <0x2d>;
};
eeprom: eeprom@50 {
compatible = "atmel,24c16";
pagesize = <16>;
reg = <0x50>;
};
rtc_wdt: rtc_wdt@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
clock-frequency = <400000>;
gpio_xten: gpio_xten@27 {
compatible = "nxp,pca9535";
gpio-controller;
#gpio-cells = <2>;
reg = <0x27>;
};
};
&usb0 {
dr_mode = "host";
};
&usb1 {
dr_mode = "host";
};
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
vdd1_reg: regulator@2 {
regulator-always-on;
};
vdd2_reg: regulator@3 {
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-always-on;
};
vdig2_reg: regulator@6 {
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-always-on;
};
vmmc_reg: regulator@12 {
compatible = "regulator-fixed";
regulator-name = "vmmc_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
/* Power */
&vbat {
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
&mac {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_default>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
ethphy0: ethernet-phy@4 {
reg = <4>;
};
ethphy1: ethernet-phy@5 {
reg = <5>;
};
};
&cpsw_emac0 {
status = "okay";
phy-handle = <&ethphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
status = "okay";
phy-handle = <&ethphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
&gpio0 {
ti,no-reset-on-init;
};
&mmc1 {
pinctrl-names = "default";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
pinctrl-0 = <&mmc0_pins_default>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&mmc3 {
dmas = <&edma_xbar 12 0 1
&edma_xbar 13 0 2>;
dma-names = "tx", "rx";
pinctrl-names = "default";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <8>;
pinctrl-0 = <&mmc2_pins_default>;
ti,non-removable;
status = "okay";
};
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins>;
#address-cells = <1>;
#size-cells = <0>;
button@0 {
label = "push_button";
linux,code = <0x100>;
gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
};
};
/* SPI Busses */
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
m25p80@0 {
compatible = "mx25l6405d";
spi-max-frequency = <40000000>;
reg = <0>;
spi-cpol;
spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
/* reg : The partition's offset and size within the mtd bank. */
partitions@0 {
label = "MLO";
reg = <0x0 0x80000>;
};
partitions@1 {
label = "U-Boot";
reg = <0x80000 0x100000>;
};
partitions@2 {
label = "U-Boot Env";
reg = <0x180000 0x20000>;
};
};
};

404
arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
View File

@@ -4,39 +4,19 @@
*
* Author: SZ Lin (林上智) <sz.lin@moxa.com>
*/
/dts-v1/;
#include "am33xx.dtsi"
#include "am335x-moxa-uc-8100-common.dtsi"
/ {
model = "Moxa UC-8100-ME-T";
compatible = "moxa,uc-8100-me-t", "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
vbat: vbat-regulator {
compatible = "regulator-fixed";
};
/* Power supply provides a fixed 3.3V @3A */
vmmcsd_fixed: vmmcsd-regulator {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
led1 {
@@ -88,237 +68,17 @@
default-state = "off";
};
};
buttons: push_button {
compatible = "gpio-keys";
};
};
&am33xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&minipcie_pins>;
minipcie_pins: pinmux_minipcie {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */
AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
>;
};
push_button_pins: pinmux_push_button {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */
AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */
AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */
AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */
AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
/* Slave 2 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
mmc0_pins_default: pinmux_mmc0_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
>;
};
mmc2_pins_default: pinmux_mmc2_pins {
pinctrl-single,pins = <
/* eMMC */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
>;
};
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
};
&uart0 {
/* Console */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
};
&uart1 {
/* UART 1 setting */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
};
&uart5 {
/* UART 2 setting */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;
tpm: tpm@20 {
compatible = "infineon,slb9645tt";
reg = <0x20>;
};
tps: tps@2d {
compatible = "ti,tps65910";
reg = <0x2d>;
};
eeprom: eeprom@50 {
compatible = "atmel,24c16";
pagesize = <16>;
reg = <0x50>;
};
rtc_wdt: rtc_wdt@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
clock-frequency = <400000>;
gpio_xten: gpio_xten@27 {
compatible = "nxp,pca9535";
gpio-controller;
#gpio-cells = <2>;
reg = <0x27>;
};
};
&usb0 {
dr_mode = "host";
};
&usb1 {
dr_mode = "host";
};
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
@@ -336,168 +96,6 @@
regulator-boot-on;
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-always-on;
};
vdig2_reg: regulator@6 {
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-always-on;
};
vmmc_reg: regulator@12 {
compatible = "regulator-fixed";
regulator-name = "vmmc_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
/* Power */
&vbat {
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
&mac {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_default>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
ethphy0: ethernet-phy@4 {
reg = <4>;
};
ethphy1: ethernet-phy@5 {
reg = <5>;
};
};
&cpsw_emac0 {
status = "okay";
phy-handle = <&ethphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
status = "okay";
phy-handle = <&ethphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
&gpio0 {
ti,no-reset-on-init;
};
&mmc1 {
pinctrl-names = "default";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
pinctrl-0 = <&mmc0_pins_default>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&mmc3 {
dmas = <&edma_xbar 12 0 1
&edma_xbar 13 0 2>;
dma-names = "tx", "rx";
pinctrl-names = "default";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <8>;
pinctrl-0 = <&mmc2_pins_default>;
non-removable;
status = "okay";
};
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins>;
#address-cells = <1>;
#size-cells = <0>;
button@0 {
label = "push_button";
linux,code = <0x100>;
gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
};
};
/* SPI Busses */
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
m25p80@0 {
compatible = "mx25l6405d";
spi-max-frequency = <40000000>;
reg = <0>;
spi-cpol;
spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
/* reg : The partition's offset and size within the mtd bank. */
partitions@0 {
label = "MLO";
reg = <0x0 0x80000>;
};
partitions@1 {
label = "U-Boot";
reg = <0x80000 0x100000>;
};
partitions@2 {
label = "U-Boot Env";
reg = <0x180000 0x20000>;
};
};
};

4
arch/arm/boot/dts/am335x-sbc-t335.dts
View File

@@ -155,13 +155,13 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x26>;
dvi_ena {
dvi-ena-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "dvi-enable";
};
lcd_ena {
lcd-ena-hog {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-high;

2
arch/arm/boot/dts/am33xx.dtsi
View File

@@ -172,7 +172,7 @@
* for the moment, just use a fake OCP bus entry to represent
* the whole bus hierarchy.
*/
ocp {
ocp: ocp {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;

4
arch/arm/boot/dts/am3517-evm-ui.dtsi
View File

@@ -183,14 +183,14 @@
};
&mcbsp1 {
status = "ok";
status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp1_pins>;
};
&mcbsp2 {
status = "ok";
status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;

2
arch/arm/boot/dts/am3517-evm.dts
View File

@@ -176,7 +176,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;

8
arch/arm/boot/dts/am3874-iceboard.dts
View File

@@ -195,7 +195,7 @@
"FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
"FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
"FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
u42: pca9575@21 {
@@ -208,7 +208,7 @@
"QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
"SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
"QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
u48: pca9575@22 {
@@ -227,7 +227,7 @@
"GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
"GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
"GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
u59: pca9575@23 {
@@ -240,7 +240,7 @@
"GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
"BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
"BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };

4
arch/arm/boot/dts/am4372.dtsi
View File

@@ -35,8 +35,8 @@
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
ethernet0 = &cpsw_port1;
ethernet1 = &cpsw_port2;
spi0 = &qspi;
};

14
arch/arm/boot/dts/am437x-cm-t43.dts
View File

@@ -325,17 +325,15 @@
};
};
&mac {
&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_default>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
@@ -346,16 +344,16 @@
};
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
ti,dual-emac-pvid = <1>;
};
&cpsw_emac1 {
&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
ti,dual-emac-pvid = <2>;
};
&dwc3_1 {

15
arch/arm/boot/dts/am437x-gp-evm.dts
View File

@@ -906,28 +906,31 @@
status = "okay";
};
&mac {
slaves = <1>;
&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-rxid";
ti,dual-emac-pvid = <1>;
};
&cpsw_port2 {
status = "disabled";
};
&elm {
@@ -1024,7 +1027,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;

13
arch/arm/boot/dts/am437x-idk-evm.dts
View File

@@ -483,28 +483,31 @@
};
};
&mac {
slaves = <1>;
&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-rxid";
ti,dual-emac-pvid = <1>;
};
&cpsw_port2 {
status = "disabled";
};
&rtc {

77
arch/arm/boot/dts/am437x-l4.dtsi
View File

@@ -520,54 +520,57 @@
#size-cells = <1>;
ranges = <0x0 0x100000 0x8000>;
mac: ethernet@0 {
compatible = "ti,am4372-cpsw","ti,cpsw";
reg = <0x0 0x800
0x1200 0x100>;
mac_sw: switch@0 {
compatible = "ti,am4372-cpsw","ti,cpsw-switch";
reg = <0x0 0x4000>;
ranges = <0 0 0x4000>;
clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
clock-names = "fck", "50mclk";
assigned-clocks = <&dpll_clksel_mac_clk>;
assigned-clock-rates = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
syscon = <&scm_conf>;
status = "disabled";
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
<&dpll_clksel_mac_clk>;
clock-names = "fck", "cpts", "50mclk";
assigned-clocks = <&dpll_clksel_mac_clk>;
assigned-clock-rates = <50000000>;
status = "disabled";
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
ranges = <0 0 0x8000>;
syscon = <&scm_conf>;
interrupt-names = "rx_thresh", "rx", "tx", "misc";
davinci_mdio: mdio@1000 {
compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x1000 0x100>;
clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
label = "port1";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 1 0>;
};
cpsw_port2: port@2 {
reg = <2>;
label = "port2";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 2 0>;
};
};
davinci_mdio_sw: mdio@1000 {
compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
clocks = <&cpsw_125mhz_gclk>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
status = "disabled";
reg = <0x1000 0x100>;
};
cpsw_emac0: slave@200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 1 0>;
};
cpsw_emac1: slave@300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 2 0>;
cpts {
clocks = <&cpsw_cpts_rft_clk>;
clock-names = "cpts";
};
};
};

2
arch/arm/boot/dts/am437x-sbc-t43.dts
View File

@@ -136,7 +136,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pinctrl_default>;

14
arch/arm/boot/dts/am437x-sk-evm.dts
View File

@@ -792,19 +792,17 @@
};
};
&mac {
&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
ethphy0: ethernet-phy@4 {
reg = <4>;
@@ -815,16 +813,16 @@
};
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <1>;
ti,dual-emac-pvid = <1>;
};
&cpsw_emac1 {
&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <2>;
ti,dual-emac-pvid = <2>;
};
&elm {

15
arch/arm/boot/dts/am43x-epos-evm.dts
View File

@@ -550,29 +550,32 @@
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mac {
&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
slaves = <1>;
};
&davinci_mdio {
&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
ethphy0: ethernet-phy@16 {
reg = <16>;
};
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rmii";
phys = <&phy_gmii_sel 1 1>;
ti,dual-emac-pvid = <1>;
};
&cpsw_port2 {
status = "disabled";
};
&i2c0 {
@@ -952,7 +955,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;

27
arch/arm/boot/dts/am571x-idk.dts
View File

@@ -208,30 +208,3 @@
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
&mac_sw {
pinctrl-names = "default", "sleep";
status = "okay";
};
&cpsw_port1 {
phy-handle = <&ethphy0_sw>;
phy-mode = "rgmii-rxid";
ti,dual-emac-pvid = <1>;
};
&cpsw_port2 {
phy-handle = <&ethphy1_sw>;
phy-mode = "rgmii-rxid";
ti,dual-emac-pvid = <2>;
};
&davinci_mdio_sw {
ethphy0_sw: ethernet-phy@0 {
reg = <0>;
};
ethphy1_sw: ethernet-phy@1 {
reg = <1>;
};
};

14
arch/arm/boot/dts/am5729-beagleboneai.dts
View File

@@ -488,25 +488,29 @@
status = "okay";
};
&davinci_mdio {
&davinci_mdio_sw {
reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
reset-delay-us = <2>;
phy0: ethernet-phy@1 {
phy0: ethernet-phy@4 {
reg = <4>;
eee-broken-100tx;
eee-broken-1000t;
};
};
&mac {
slaves = <1>;
&mac_sw {
status = "okay";
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-rxid";
ti,dual-emac-pvid = <1>;
};
&cpsw_port2 {
status = "disabled";
};
&ocp {

5
arch/arm/boot/dts/am572x-idk.dts
View File

@@ -27,8 +27,3 @@
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
&mac {
status = "okay";
dual_emac;
};

5
arch/arm/boot/dts/am574x-idk.dts
View File

@@ -36,11 +36,6 @@
pinctrl-2 = <&mmc2_pins_default>;
};
&mac {
status = "okay";
dual_emac;
};
&m_can0 {
status = "disabled";
};

19
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
View File

@@ -451,7 +451,7 @@
<&dra7_pmx_core 0x3f8>;
};
&davinci_mdio {
&davinci_mdio_sw {
phy0: ethernet-phy@1 {
reg = <1>;
};
@@ -461,21 +461,20 @@
};
};
&mac {
&mac_sw {
status = "okay";
dual_emac;
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <1>;
ti,dual-emac-pvid = <1>;
};
&cpsw_emac1 {
&cpsw_port2 {
phy-handle = <&phy1>;
phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <2>;
ti,dual-emac-pvid = <2>;
};
&mmc1 {
@@ -582,13 +581,13 @@
};
&dss {
status = "ok";
status = "okay";
vdda_video-supply = <&ldoln_reg>;
};
&hdmi {
status = "ok";
status = "okay";
vdda-supply = <&ldo4_reg>;
port {
@@ -599,7 +598,7 @@
};
&pcie1_rc {
status = "ok";
status = "okay";
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};

13
arch/arm/boot/dts/am57xx-cl-som-am57x.dts
View File

@@ -546,27 +546,26 @@
};
};
&mac {
&mac_sw {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_pins_default>;
pinctrl-1 = <&cpsw_pins_sleep>;
dual_emac;
};
&cpsw_emac0 {
&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <0>;
ti,dual-emac-pvid = <1>;
};
&cpsw_emac1 {
&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
ti,dual-emac-pvid = <2>;
};
&davinci_mdio {
&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_pins_default>;
pinctrl-1 = <&davinci_mdio_pins_sleep>;

14
arch/arm/boot/dts/am57xx-idk-common.dtsi
View File

@@ -448,19 +448,23 @@
ext-clk-src;
};
&cpsw_emac0 {
&mac_sw {
status = "okay";
};
&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <1>;
ti,dual-emac-pvid = <1>;
};
&cpsw_emac1 {
&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <2>;
ti,dual-emac-pvid = <2>;
};
&davinci_mdio {
&davinci_mdio_sw {
ethphy0: ethernet-phy@0 {
reg = <0>;
};

4
arch/arm/boot/dts/am57xx-sbc-am57x.dts
View File

@@ -120,7 +120,7 @@
};
&dss {
status = "ok";
status = "okay";
vdda_video-supply = <&ldoln_reg>;
@@ -148,7 +148,7 @@
};
&hdmi {
status = "ok";
status = "okay";
vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";

3
arch/arm/boot/dts/animeo_ip.dts
View File

@@ -26,7 +26,7 @@
stdout-path = &usart2;
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -81,6 +81,7 @@
pinctrl-0 = <&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@1 {

2
arch/arm/boot/dts/arm-realview-eb.dtsi
View File

@@ -390,7 +390,7 @@
compatible = "arm,sp805", "arm,primecell";
reg = <0x10010000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};

20
arch/arm/boot/dts/arm-realview-pb11mp.dts
View File

@@ -546,7 +546,7 @@
interrupt-parent = <&intc_pb11mp>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};
@@ -556,7 +556,7 @@
interrupt-parent = <&intc_pb11mp>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
clock-names = "wdog_clk", "apb_pclk";
};
timer01: timer@10011000 {
@@ -568,8 +568,8 @@
clocks = <&sp810_syscon 0>,
<&sp810_syscon 1>,
<&pclk>;
clock-names = "timerclk0",
"timerclk1",
clock-names = "timer0clk",
"timer1clk",
"apb_pclk";
};
@@ -582,8 +582,8 @@
clocks = <&sp810_syscon 2>,
<&sp810_syscon 3>,
<&pclk>;
clock-names = "timerclk2",
"timerclk3",
clock-names = "timer0clk",
"timer1clk",
"apb_pclk";
};
@@ -645,16 +645,16 @@
timer45: timer@10018000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10018000 0x1000>;
clocks = <&timclk>, <&pclk>;
clock-names = "timer", "apb_pclk";
clocks = <&timclk>, <&timclk>, <&pclk>;
clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
timer67: timer@10019000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10019000 0x1000>;
clocks = <&timclk>, <&pclk>;
clock-names = "timer", "apb_pclk";
clocks = <&timclk>, <&timclk>, <&pclk>;
clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};

4
arch/arm/boot/dts/arm-realview-pbx.dtsi
View File

@@ -381,7 +381,7 @@
compatible = "arm,sp805", "arm,primecell";
reg = <0x1000f000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};
@@ -389,7 +389,7 @@
compatible = "arm,sp805", "arm,primecell";
reg = <0x10010000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};

17
arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
View File

@@ -1571,3 +1571,20 @@
&sdhci1 {
status = "disabled";
};
&fmc_flash0 {
#include "facebook-bmc-flash-layout.dtsi"
};
&fmc_flash1 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1@0 {
reg = <0x0 0x2000000>;
label = "flash1";
};
};
};

47
arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
View File

@@ -88,17 +88,60 @@
*/
&fmc_flash0 {
partitions {
data0@1c00000 {
reg = <0x1c00000 0x2400000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/*
* u-boot partition: 384KB.
*/
u-boot@0 {
reg = <0x0 0x60000>;
label = "u-boot";
};
/*
* u-boot environment variables: 128KB.
*/
u-boot-env@60000 {
reg = <0x60000 0x20000>;
label = "env";
};
/*
* FIT image: 59.5 MB.
*/
fit@80000 {
reg = <0x80000 0x3b80000>;
label = "fit";
};
/*
* "data0" partition (4MB) is reserved for persistent
* data store.
*/
data0@3800000 {
reg = <0x3c00000 0x400000>;
label = "data0";
};
/*
* "flash0" partition (covering the entire flash) is
* explicitly created to avoid breaking legacy applications.
*/
flash0@0 {
reg = <0x0 0x4000000>;
label = "flash0";
};
};
};
&fmc_flash1 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1@0 {
reg = <0x0 0x4000000>;
};

5
arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
View File

@@ -48,7 +48,7 @@
flash@0 {
status = "okay";
m25p,fast-read;
label = "fmc0";
label = "spi0.0";
#include "facebook-bmc-flash-layout.dtsi"
};
};
@@ -71,7 +71,8 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd4_default
&pinctrl_rxd4_default>;
&pinctrl_rxd4_default
&pinctrl_ndts4_default>;
};
&uart5 {

420
arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts Normal file
View File

@@ -0,0 +1,420 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2019 Facebook Inc.
/dts-v1/;
#include <dt-bindings/gpio/aspeed-gpio.h>
#include "ast2500-facebook-netbmc-common.dtsi"
/ {
model = "Facebook Wedge 400 BMC";
compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
aliases {
/*
* PCA9548 (2-0070) provides 8 channels connecting to
* SCM (System Controller Module).
*/
i2c16 = &imux16;
i2c17 = &imux17;
i2c18 = &imux18;
i2c19 = &imux19;
i2c20 = &imux20;
i2c21 = &imux21;
i2c22 = &imux22;
i2c23 = &imux23;
/*
* PCA9548 (8-0070) provides 8 channels connecting to
* SMB (Switch Main Board).
*/
i2c24 = &imux24;
i2c25 = &imux25;
i2c26 = &imux26;
i2c27 = &imux27;
i2c28 = &imux28;
i2c29 = &imux29;
i2c30 = &imux30;
i2c31 = &imux31;
/*
* PCA9548 (11-0076) provides 8 channels connecting to
* FCM (Fan Controller Module).
*/
i2c32 = &imux32;
i2c33 = &imux33;
i2c34 = &imux34;
i2c35 = &imux35;
i2c36 = &imux36;
i2c37 = &imux37;
i2c38 = &imux38;
i2c39 = &imux39;
spi2 = &spi_gpio;
};
chosen {
stdout-path = &uart1;
bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
};
ast-adc-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
};
/*
* GPIO-based SPI Master is required to access SPI TPM, because
* full-duplex SPI transactions are not supported by ASPEED SPI
* Controllers.
*/
spi_gpio: spi-gpio {
status = "okay";
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
tpmdev@0 {
compatible = "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};
};
};
/*
* Both firmware flashes are 128MB on Wedge400 BMC.
*/
&fmc_flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/*
* u-boot partition: 384KB.
*/
u-boot@0 {
reg = <0x0 0x60000>;
label = "u-boot";
};
/*
* u-boot environment variables: 128KB.
*/
u-boot-env@60000 {
reg = <0x60000 0x20000>;
label = "env";
};
/*
* FIT image: 123.5 MB.
*/
fit@80000 {
reg = <0x80000 0x7b80000>;
label = "fit";
};
/*
* "data0" partition (4MB) is reserved for persistent
* data store.
*/
data0@3800000 {
reg = <0x7c00000 0x800000>;
label = "data0";
};
/*
* "flash0" partition (covering the entire flash) is
* explicitly created to avoid breaking legacy applications.
*/
flash0@0 {
reg = <0x0 0x8000000>;
label = "flash0";
};
};
};
&fmc_flash1 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1@0 {
reg = <0x0 0x8000000>;
label = "flash1";
};
};
};
&uart2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd2_default
&pinctrl_rxd2_default>;
};
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd4_default
&pinctrl_rxd4_default>;
};
/*
* I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
* communication.
*/
&i2c0 {
status = "okay";
multi-master;
bus-frequency = <1000000>;
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux16: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux17: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux18: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux19: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux20: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux21: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux22: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux23: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
};
&i2c8 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux24: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux25: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux26: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux27: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux28: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux29: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux30: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux31: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c9 {
status = "okay";
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
i2c-switch@76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76>;
i2c-mux-idle-disconnect;
imux32: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux33: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux34: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux35: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux36: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux37: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux38: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux39: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c12 {
status = "okay";
};
&i2c13 {
status = "okay";
};
&adc {
status = "okay";
};
&ehci1 {
status = "okay";
};
&uhci {
status = "okay";
};
&sdhci1 {
/*
* DMA mode needs to be disabled to avoid conflicts with UHCI
* Controller in AST2500 SoC.
*/
sdhci-caps-mask = <0x0 0x580000>;
};

17
arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
View File

@@ -108,3 +108,20 @@
&i2c13 {
status = "okay";
};
&fmc_flash0 {
#include "facebook-bmc-flash-layout.dtsi"
};
&fmc_flash1 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1@0 {
reg = <0x0 0x2000000>;
label = "flash1";
};
};
};

23
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
View File

@@ -4,6 +4,7 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
@@ -52,9 +53,10 @@
};
vga_memory: region@bf000000 {
no-map;
reg = <0xbf000000 0x01000000>; /* 16M */
};
no-map;
compatible = "shared-dma-pool";
reg = <0xbf000000 0x01000000>; /* 16M */
};
};
gpio-keys {
@@ -178,6 +180,10 @@
status = "okay";
};
&pinctrl_emmc_default {
bias-disable;
};
&emmc {
status = "okay";
};
@@ -698,6 +704,7 @@
};
&i2c7 {
multi-master;
status = "okay";
si7021-a20@20 {
@@ -831,6 +838,11 @@
};
};
ibm-panel@62 {
compatible = "ibm,op-panel";
reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
};
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
@@ -1121,3 +1133,8 @@
spi-max-frequency = <100000000>;
};
};
&xdma {
status = "okay";
memory-region = <&vga_memory>;
};

662
arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts Normal file
View File

@@ -0,0 +1,662 @@
// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
model = "Mowgli BMC";
compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
flash_memory: region@98000000 {
no-map;
reg = <0x98000000 0x04000000>; /* 64M */
};
gfx_memory: framebuffer {
size = <0x01000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
video_engine_memory: jpegbuffer {
size = <0x02000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
};
gpio-keys {
compatible = "gpio-keys";
air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 6)>;
};
checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 2)>;
};
ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 0)>;
};
id-button {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
fan0-presence {
label = "fan0-presence";
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
fan1-presence {
label = "fan1-presence";
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
fan2-presence {
label = "fan2-presence";
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
fan3-presence {
label = "fan3-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
fan4-presence {
label = "fan4-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
};
leds {
compatible = "gpio-leds";
front-fault {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
};
power-button {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
};
front-id {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
};
fan0 {
retain-state-shutdown;
default-state = "keep";
gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
};
fan1 {
retain-state-shutdown;
default-state = "keep";
gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
};
fan2 {
retain-state-shutdown;
default-state = "keep";
gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
};
fan3 {
retain-state-shutdown;
default-state = "keep";
gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
};
fan4 {
retain-state-shutdown;
default-state = "keep";
gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
};
};
fsi: gpio-fsi {
compatible = "fsi-master-gpio", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
};
iio-hwmon-12v {
compatible = "iio-hwmon";
io-channels = <&adc 0>;
};
iio-hwmon-5v {
compatible = "iio-hwmon";
io-channels = <&adc 1>;
};
iio-hwmon-3v {
compatible = "iio-hwmon";
io-channels = <&adc 2>;
};
iio-hwmon-vdd {
compatible = "iio-hwmon";
io-channels = <&adc 3>;
};
iio-hwmon-vcs {
compatible = "iio-hwmon";
io-channels = <&adc 5>;
};
iio-hwmon-vdn {
compatible = "iio-hwmon";
io-channels = <&adc 7>;
};
iio-hwmon-vio {
compatible = "iio-hwmon";
io-channels = <&adc 9>;
};
iio-hwmon-vddra {
compatible = "iio-hwmon";
io-channels = <&adc 11>;
};
iio-hwmon-battery {
compatible = "iio-hwmon";
io-channels = <&adc 12>;
};
iio-hwmon-vddrb {
compatible = "iio-hwmon";
io-channels = <&adc 13>;
};
};
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
&pinctrl_pwm2_default &pinctrl_pwm3_default
&pinctrl_pwm4_default>;
fan@0 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
};
fan@1 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
};
fan@2 {
reg = <0x02>;
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
};
fan@3 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
};
fan@4 {
reg = <0x04>;
aspeed,fan-tach-ch = /bits/ 8 <0x04>;
};
fan@5 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x05>;
};
fan@6 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x06>;
};
fan@7 {
reg = <0x02>;
aspeed,fan-tach-ch = /bits/ 8 <0x07>;
};
fan@8 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x08>;
};
fan@9 {
reg = <0x04>;
aspeed,fan-tach-ch = /bits/ 8 <0x09>;
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
label = "bmc";
m25p,fast-read;
spi-max-frequency = <50000000>;
partitions {
#address-cells = < 1 >;
#size-cells = < 1 >;
compatible = "fixed-partitions";
u-boot@0 {
reg = < 0 0x60000 >;
label = "u-boot";
};
u-boot-env@60000 {
reg = < 0x60000 0x20000 >;
label = "u-boot-env";
};
obmc-ubi@80000 {
reg = < 0x80000 0x1F80000 >;
label = "obmc-ubi";
};
};
};
flash@1 {
status = "okay";
label = "alt-bmc";
m25p,fast-read;
spi-max-frequency = <50000000>;
partitions {
#address-cells = < 1 >;
#size-cells = < 1 >;
compatible = "fixed-partitions";
u-boot@0 {
reg = < 0 0x60000 >;
label = "alt-u-boot";
};
u-boot-env@60000 {
reg = < 0x60000 0x20000 >;
label = "alt-u-boot-env";
};
obmc-ubi@80000 {
reg = < 0x80000 0x1F80000 >;
label = "alt-obmc-ubi";
};
};
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
label = "pnor";
m25p,fast-read;
spi-max-frequency = <100000000>;
};
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
flash = <&spi1>;
};
&uart1 {
/* Rear RS-232 connector */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default
&pinctrl_nrts1_default
&pinctrl_ndtr1_default
&pinctrl_ndsr1_default
&pinctrl_ncts1_default
&pinctrl_ndcd1_default
&pinctrl_nri1_default>;
};
&uart2 {
/* APSS */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
};
&uart5 {
status = "okay";
};
&mac0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
<&syscon ASPEED_CLK_MAC1RCLK>;
clock-names = "MACCLK", "RCLK";
use-ncsi;
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c0 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
};
&i2c1 {
status = "disabled";
};
&i2c2 {
status = "okay";
/* CPU MFG CONN */
};
&i2c3 {
status = "okay";
/* APSS */
/* CPLD */
/* PCA9516 (repeater) ->
* CLK Buffer 9FGS9092
* Power Supply 0
* Power Supply 1
* PCA 9552 LED
*/
pca9552: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
power-supply@68 {
compatible = "ibm,cffps1";
reg = <0x68>;
};
power-supply@69 {
compatible = "ibm,cffps1";
reg = <0x69>;
};
};
&i2c4 {
status = "okay";
/* CP0 VDD & VCS : IR35221 */
/* CP0 VDN & VIO : IR35221 */
/* CP0 VDDR : IR35221 */
ir35221@28 {
compatible = "infineon,ir35221";
reg = <0x28>;
};
ir35221@29 {
compatible = "infineon,ir35221";
reg = <0x29>;
};
ir35221@2d {
compatible = "infineon,ir35221";
reg = <0x2d>;
};
};
&i2c5 {
status = "disabled";
};
&i2c6 {
status = "disabled";
};
&i2c7 {
status = "disabled";
};
&i2c8 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
&i2c9 {
status = "okay";
/* PCIe G3 x16 slot */
};
&i2c10 {
status = "disabled";
};
&i2c11 {
status = "okay";
/* CPLD */
/* TPM */
/* RTC RX8900CE */
/* TMP275A */
/* TMP275A */
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
};
&i2c12 {
status = "disabled";
};
&i2c13 {
status = "disabled";
};
&vuart {
status = "okay";
};
&gfx {
status = "okay";
memory-region = <&gfx_memory>;
};
&adc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default
&pinctrl_adc1_default
&pinctrl_adc2_default
&pinctrl_adc3_default
&pinctrl_adc4_default
&pinctrl_adc5_default
&pinctrl_adc6_default
&pinctrl_adc7_default
&pinctrl_adc8_default
&pinctrl_adc9_default
&pinctrl_adc10_default
&pinctrl_adc11_default
&pinctrl_adc12_default
&pinctrl_adc13_default
&pinctrl_adc14_default
&pinctrl_adc15_default>;
};
&wdt1 {
aspeed,reset-type = "none";
aspeed,external-signal;
aspeed,ext-push-pull;
aspeed,ext-active-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdtrst1_default>;
};
&wdt2 {
aspeed,alt-boot;
};
&ibt {
status = "okay";
};
&vhub {
status = "okay";
};
&video {
status = "okay";
memory-region = <&video_engine_memory>;
};
#include "ibm-power9-dual.dtsi"

7
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
View File

@@ -4,6 +4,7 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
@@ -438,7 +439,13 @@
};
&i2c0 {
multi-master;
status = "okay";
ibm-panel@62 {
compatible = "ibm,op-panel";
reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
};
};
&i2c1 {

1
arch/arm/boot/dts/aspeed-g5.dtsi
View File

@@ -425,7 +425,6 @@
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
aspeed,sirq-polarity-sense = <&syscon 0x70 25>;
status = "disabled";
};

13
arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
View File

@@ -47,25 +47,12 @@
status = "okay";
m25p,fast-read;
label = "spi0.0";
#include "facebook-bmc-flash-layout.dtsi"
};
fmc_flash1: flash@1 {
status = "okay";
m25p,fast-read;
label = "spi0.1";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1@0 {
reg = <0x0 0x2000000>;
label = "flash1";
};
};
};
};

3
arch/arm/boot/dts/at91-ariag25.dts
View File

@@ -22,7 +22,7 @@
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
};
memory {
memory@20000000 {
/* 128 MB, change this for 256 MB revision */
reg = <0x20000000 0x8000000>;
};
@@ -93,6 +93,7 @@
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@0 {

3
arch/arm/boot/dts/at91-ariettag25.dts
View File

@@ -15,7 +15,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x8000000>;
};
@@ -48,6 +48,7 @@
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@0 {

3
arch/arm/boot/dts/at91-cosino.dtsi
View File

@@ -20,7 +20,7 @@
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
};
memory {
memory@20000000 {
reg = <0x20000000 0x8000000>;
};
@@ -112,6 +112,7 @@
&pinctrl_board_mmc0
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@0 {

1
arch/arm/boot/dts/at91-cosino_mega2560.dts
View File

@@ -34,6 +34,7 @@
pinctrl-0 = <
&pinctrl_mmc1_slot0_clk_cmd_dat0
&pinctrl_mmc1_slot0_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@0 {

3
arch/arm/boot/dts/at91-foxg20.dts
View File

@@ -17,7 +17,7 @@
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -55,6 +55,7 @@
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@1 {

2
arch/arm/boot/dts/at91-kizbox.dts
View File

@@ -18,7 +18,7 @@
stdout-path = &dbgu;
};
memory {
memory@20000000 {
reg = <0x20000000 0x2000000>;
};

2
arch/arm/boot/dts/at91-kizbox2-common.dtsi
View File

@@ -17,7 +17,7 @@
stdout-path = &dbgu;
};
memory {
memory@20000000 {
reg = <0x20000000 0x10000000>;
};

2
arch/arm/boot/dts/at91-kizboxmini-common.dtsi
View File

@@ -16,7 +16,7 @@
stdout-path = &dbgu;
};
memory {
memory@20000000 {
reg = <0x20000000 0x8000000>;
};

2
arch/arm/boot/dts/at91-linea.dtsi
View File

@@ -13,7 +13,7 @@
compatible = "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
};

3
arch/arm/boot/dts/at91-qil_a9260.dts
View File

@@ -14,7 +14,7 @@
bootargs = "console=ttyS0,115200";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -52,6 +52,7 @@
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot0_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;

3
arch/arm/boot/dts/at91-sam9_l9260.dts
View File

@@ -15,7 +15,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -49,6 +49,7 @@
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@1 {

2
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View File

@@ -16,7 +16,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x10000000>;
};

2
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
View File

@@ -9,7 +9,7 @@
model = "Aries/DENX MA5D4";
compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
memory {
memory@20000000 {
reg = <0x20000000 0x10000000>;
};

2
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View File

@@ -16,7 +16,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x20000000>;
};

2
arch/arm/boot/dts/at91-sama5d4ek.dts
View File

@@ -16,7 +16,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x20000000>;
};

2
arch/arm/boot/dts/at91-som60.dtsi
View File

@@ -16,7 +16,7 @@
stdout-path = &dbgu;
};
memory {
memory@20000000 {
reg = <0x20000000 0x8000000>;
};

2
arch/arm/boot/dts/at91-vinco.dts
View File

@@ -17,7 +17,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};

3
arch/arm/boot/dts/at91-wb45n.dtsi
View File

@@ -17,7 +17,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -145,6 +145,7 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;

2
arch/arm/boot/dts/at91-wb50n.dtsi
View File

@@ -17,7 +17,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
};

11
arch/arm/boot/dts/at91rm9200.dtsi
View File

@@ -39,16 +39,17 @@
ssc2 = &ssc2;
};
cpus {
#address-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
cpu {
cpu@0 {
compatible = "arm,arm920t";
device_type = "cpu";
reg = <0>;
};
};
memory {
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x04000000>;
};
@@ -70,6 +71,9 @@
sram: sram@200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00200000 0x4000>;
};
ahb {
@@ -169,7 +173,6 @@
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
status = "disabled";
};

2
arch/arm/boot/dts/at91rm9200ek.dts
View File

@@ -15,7 +15,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};

11
arch/arm/boot/dts/at91sam9260.dtsi
View File

@@ -36,16 +36,17 @@
ssc0 = &ssc0;
};
cpus {
#address-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
cpu {
cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
reg = <0>;
};
};
memory {
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x04000000>;
};
@@ -73,6 +74,9 @@
sram0: sram@2ff000 {
compatible = "mmio-sram";
reg = <0x002ff000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x002ff000 0x2000>;
};
ahb {
@@ -650,7 +654,6 @@
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "mci_clk";
status = "disabled";

3
arch/arm/boot/dts/at91sam9260ek.dts
View File

@@ -16,7 +16,7 @@
stdout-path = &dbgu;
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -55,6 +55,7 @@
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@1 {
reg = <1>;

10
arch/arm/boot/dts/at91sam9261.dtsi
View File

@@ -33,16 +33,17 @@
};
cpus {
#address-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
cpu {
cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
reg = <0>;
};
};
memory {
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x08000000>;
};
@@ -64,6 +65,9 @@
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x28000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00300000 0x28000>;
};
ahb {

2
arch/arm/boot/dts/at91sam9261ek.dts
View File

@@ -16,7 +16,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};

15
arch/arm/boot/dts/at91sam9263.dtsi
View File

@@ -35,16 +35,17 @@
};
cpus {
#address-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
cpu {
cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
reg = <0>;
};
};
memory {
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x08000000>;
};
@@ -66,11 +67,17 @@
sram0: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x14000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00300000 0x14000>;
};
sram1: sram@500000 {
compatible = "mmio-sram";
reg = <0x00500000 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00500000 0x4000>;
};
ahb {
@@ -647,7 +654,6 @@
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
@@ -659,7 +665,6 @@
compatible = "atmel,hsmci";
reg = <0xfff84000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;

3
arch/arm/boot/dts/at91sam9263ek.dts
View File

@@ -16,7 +16,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -72,6 +72,7 @@
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot0_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;

5
arch/arm/boot/dts/at91sam9g20.dtsi
View File

@@ -11,7 +11,7 @@
model = "Atmel AT91SAM9G20 family SoC";
compatible = "atmel,at91sam9g20";
memory {
memory@20000000 {
reg = <0x20000000 0x08000000>;
};
@@ -22,6 +22,9 @@
sram1: sram@2fc000 {
compatible = "mmio-sram";
reg = <0x002fc000 0x8000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x002fc000 0x8000>;
};
ahb {

3
arch/arm/boot/dts/at91sam9g20ek_common.dtsi
View File

@@ -13,7 +13,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -93,6 +93,7 @@
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@1 {
reg = <1>;

Some files were not shown because too many files have changed in this diff Show More