ich777/linux_media
1
0
Fork 0
mirror of https://github.com/tbsdtv/linux_media.git synced 2025-07-23 12:43:29 +02:00
Code Issues Packages Projects Releases Wiki Activity

Merge tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Browse Source 
More Qualcomm DTS updates for 6.2

This introduces support for the OnePlus One, on MSM8974Pro, and properly
marks other Pro devices as compatible thereof. Also on MSM8974, the
description of USB devices and their PHYs are cleaned up.

On the binding side compatibles for recently added ARM and ARM64 boards
are added.

* tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits)
  dt-bindings: arm: qcom: Add zombie
  ARM: dts: qcom: msm8974: Add OnePlus One
  dt-bindings: arm: qcom: Document oneplus,bacon device
  ARM: dts: qcom: msm8974: clean up USB nodes
  arm: dts: qcom: use qcom,msm8974pro for pro devices
  dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974
  ARM: dts: qcom: align LED node names with dtschema
  dt-bindings: arm: qcom: Document additional sa8540p device
  dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224)
  dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices
  dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip
  dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
  dt-bindings: arm: cpus: add qcom kryo 360 compatible
  ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
  ARM: dts: qcom-msm8960: use define for interrupt constants
  dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV
  ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema
  ARM: dts: qcom: msm8226: Add MMCC node
  dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker
  dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
  ...

Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
2022-12-07 22:06:03 +01:00
parent c24ba5964f 812e13ddb5
commit da060ab86e
49 changed files with 4016 additions and 2792 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/arm/cpus.yaml
View File

@@ -178,6 +178,7 @@ properties:
- qcom,kryo250
- qcom,kryo260
- qcom,kryo280
- qcom,kryo360
- qcom,kryo385
- qcom,kryo468
- qcom,kryo485

82
Documentation/devicetree/bindings/arm/qcom.yaml
View File

@@ -29,17 +29,22 @@ description: |
apq8074
apq8084
apq8096
ipq4018
ipq6018
ipq8074
mdm9615
msm8226
msm8916
msm8956
msm8974
msm8976
msm8992
msm8994
msm8996
msm8998
qcs404
qdu1000
qru1000
sa8155p
sa8540p
sc7180
@@ -51,6 +56,7 @@ description: |
sdm632
sdm636
sdm660
sdm670
sdm845
sdx55
sdx65
@@ -58,6 +64,7 @@ description: |
sm6115
sm6125
sm6350
sm6375
sm7225
sm8150
sm8250
@@ -78,6 +85,7 @@ description: |
mtp
qrd
sbc
x100
The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
where the minor number may be omitted when it's zero, i.e. v1.0 is the same
@@ -116,7 +124,9 @@ properties:
- items:
- enum:
- asus,sparrow
- huawei,sturgeon
- lg,lenok
- samsung,matisse-wifi
- const: qcom,apq8026
- items:
@@ -150,6 +160,12 @@ properties:
- samsung,s3ve3g
- const: qcom,msm8226
- items:
- enum:
- sony,kugo-row
- sony,suzu-row
- const: qcom,msm8956
- items:
- enum:
- qcom,msm8960-cdp
@@ -157,14 +173,20 @@ properties:
- items:
- enum:
- fairphone,fp2
- lge,hammerhead
- samsung,klte
- sony,xperia-amami
- sony,xperia-castor
- sony,xperia-honami
- const: qcom,msm8974
- items:
- enum:
- fairphone,fp2
- oneplus,bacon
- samsung,klte
- sony,xperia-castor
- const: qcom,msm8974pro
- const: qcom,msm8974
- items:
- const: qcom,msm8916-mtp
- const: qcom,msm8916-mtp/1
@@ -251,8 +273,15 @@ properties:
- sony,xperia-lilac
- sony,xperia-maple
- sony,xperia-poplar
- xiaomi,sagit
- const: qcom,msm8998
- items:
- enum:
- 8dev,jalapeno
- alfa-network,ap120c-ac
- const: qcom,ipq4018
- items:
- enum:
- qcom,ipq4019-ap-dk01.1-c1
@@ -264,6 +293,7 @@ properties:
- items:
- enum:
- mikrotik,rb3011
- qcom,ipq8064-ap148
- const: qcom,ipq8064
@@ -274,6 +304,25 @@ properties:
- qcom,ipq8074-hk10-c2
- const: qcom,ipq8074
- description: Sierra Wireless MangOH Green with WP8548 Module
items:
- const: swir,mangoh-green-wp8548
- const: swir,wp8548
- const: qcom,mdm9615
- description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
items:
- enum:
- qcom,qdu1000-idp
- qcom,qdu1000-x100
- const: qcom,qdu1000
- description: Qualcomm Technologies, Inc. Radio Unit 1000 platform
items:
- enum:
- qcom,qru1000-idp
- const: qcom,qru1000
- description: Qualcomm Technologies, Inc. SC7180 IDP
items:
- enum:
@@ -595,6 +644,11 @@ properties:
- const: google,evoker
- const: qcom,sc7280
- description: Google Evoker with LTE (newest rev)
items:
- const: google,evoker-sku512
- const: qcom,sc7280
- description: Google Herobrine (newest rev)
items:
- const: google,herobrine
@@ -615,6 +669,16 @@ properties:
- const: google,villager-sku512
- const: qcom,sc7280
- description: Google Zombie (newest rev)
items:
- const: google,zombie
- const: qcom,sc7280
- description: Google Zombie with LTE (newest rev)
items:
- const: google,zombie-sku512
- const: qcom,sc7280
- items:
- enum:
- lenovo,flex-5g
@@ -657,6 +721,11 @@ properties:
- xiaomi,lavender
- const: qcom,sdm660
- items:
- enum:
- google,sargo
- const: qcom,sdm670
- items:
- enum:
- qcom,sdx55-mtp
@@ -690,6 +759,7 @@ properties:
- items:
- enum:
- qcom,sa8295p-adp
- qcom,sa8540p-ride
- const: qcom,sa8540p
- items:
@@ -730,6 +800,11 @@ properties:
- sony,pdx213
- const: qcom,sm6350
- items:
- enum:
- sony,pdx225
- const: qcom,sm6375
- items:
- enum:
- fairphone,fp4
@@ -767,6 +842,7 @@ properties:
- qcom,sm8450-hdk
- qcom,sm8450-qrd
- sony,pdx223
- sony,pdx224
- const: qcom,sm8450
additionalProperties: true

12
Documentation/devicetree/bindings/arm/swir.txt
View File

@@ -1,12 +0,0 @@
Sierra Wireless Modules device tree bindings
--------------------------------------------
Supported Modules :
- WP8548 : Includes MDM9615 and PM8018 in a module
Sierra Wireless modules shall have the following properties :
Required root node property
- compatible: "swir,wp8548" for the WP8548 CF3 Module
Board compatible values:
- "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module

1
Documentation/devicetree/bindings/sram/qcom,imem.yaml
View File

@@ -25,6 +25,7 @@ properties:
- qcom,sdm630-imem
- qcom,sdm845-imem
- qcom,sdx55-imem
- qcom,sdx65-imem
- const: syscon
- const: simple-mfd

2
Documentation/devicetree/bindings/vendor-prefixes.yaml
View File

@@ -69,6 +69,8 @@ patternProperties:
description: Annapurna Labs
"^alcatel,.*":
description: Alcatel
"^alfa-network,.*":
description: ALFA Network Inc.
"^allegro,.*":
description: Allegro DVT
"^allo,.*":

3
arch/arm/boot/dts/Makefile
View File

@@ -1033,7 +1033,9 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8016-sbc.dtb \
qcom-apq8026-asus-sparrow.dtb \
qcom-apq8026-huawei-sturgeon.dtb \
qcom-apq8026-lg-lenok.dtb \
qcom-apq8026-samsung-matisse-wifi.dtb \
qcom-apq8060-dragonboard.dtb \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
@@ -1063,6 +1065,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
qcom-msm8974-sony-xperia-rhine-honami.dtb \
qcom-msm8974pro-fairphone-fp2.dtb \
qcom-msm8974pro-oneplus-bacon.dtb \
qcom-msm8974pro-samsung-klte.dtb \
qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb \

2
arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
View File

@@ -87,7 +87,7 @@
};
&rpm_requests {
pm8226-regulators {
regulators {
compatible = "qcom,rpm-pm8226-regulators";
pm8226_s3: s3 {

376
arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts Normal file
View File

@@ -0,0 +1,376 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
*/
/dts-v1/;
#include "qcom-msm8226.dtsi"
#include "qcom-pm8226.dtsi"
/delete-node/ &adsp_region;
/ {
model = "Huawei Watch";
compatible = "huawei,sturgeon", "qcom,apq8026";
chassis-type = "watch";
qcom,msm-id = <199 0x20000>;
qcom,board-id = <8 4>;
reserved-memory {
sbl_region: sbl@2f00000 {
reg = <0x02f00000 0x100000>;
no-map;
};
external_image_region: external-image@3100000 {
reg = <0x3100000 0x200000>;
no-map;
};
peripheral_region: peripheral@3300000 {
reg = <0x3300000 0x600000>;
no-map;
};
adsp_region: adsp@3900000 {
reg = <0x3900000 0x1400000>;
no-map;
};
modem_region: modem@4d00000 {
reg = <0x4d00000 0x1b00000>;
no-map;
};
modem_efs_region: modem-efs@7f00000 {
reg = <0x7f00000 0x100000>;
no-map;
};
};
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
regulator-name = "wl-reg";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_regulator_default_state>;
};
};
&adsp {
status = "okay";
};
&blsp1_i2c5 {
clock-frequency = <384000>;
status = "okay";
touchscreen@20 {
compatible = "syna,rmi4-i2c";
reg = <0x20>;
interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8226_l19>;
vio-supply = <&pm8226_lvs1>;
pinctrl-names = "default";
pinctrl-0 = <&touch_default_state>;
syna,startup-delay-ms = <160>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>;
};
rmi4-f12@12 {
reg = <0x12>;
syna,sensor-type = <1>;
};
};
};
&blsp1_uart4 {
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart4_default_state>;
status = "okay";
bluetooth {
compatible = "brcm,bcm43430a0-bt";
max-speed = <3000000>;
pinctrl-names = "default";
pinctrl-0 = <&bluetooth_default_state>;
host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm8226-regulators";
pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
pm8226_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2200000>;
};
pm8226_s5: s5 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
pm8226_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l3: l3 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1337500>;
};
pm8226_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l5: l5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1850000>;
};
pm8226_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l9: l9 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l14: l14 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
pm8226_l15: l15 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
pm8226_l16: l16 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3350000>;
};
pm8226_l17: l17 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l18: l18 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8226_l20: l20 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
pm8226_l21: l21 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l22: l22 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l24: l24 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
pm8226_l25: l25 {
regulator-min-microvolt = <1775000>;
regulator-max-microvolt = <2125000>;
};
pm8226_l26: l26 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l27: l27 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l28: l28 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_lvs1: lvs1 {};
};
};
&sdhc_1 {
vmmc-supply = <&pm8226_l17>;
vqmmc-supply = <&pm8226_l6>;
bus-width = <8>;
non-removable;
status = "okay";
};
&sdhc_3 {
max-frequency = <100000000>;
non-removable;
vmmc-supply = <&vreg_wlan>;
vqmmc-supply = <&pm8226_l6>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wifi@1 {
compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
reg = <1>;
interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wlan_hostwake_default_state>;
};
};
&smbb {
qcom,fast-charge-safe-voltage = <4370000>;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,minimum-input-voltage = <4350000>;
qcom,fast-charge-current-limit = <300000>;
qcom,fast-charge-safe-current = <600000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
};
&tlmm {
blsp1_uart4_default_state: blsp1-uart4-default-state {
pins = "gpio12", "gpio13", "gpio14", "gpio15";
function = "blsp_uart4";
drive-strength = <8>;
bias-disable;
};
bluetooth_default_state: bluetooth-default-state {
pins = "gpio63", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
touch_default_state: touch-default-state {
irq-pins {
pins = "gpio17";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
reset-pins {
pins = "gpio16";
function = "gpio";
drive-strength = <6>;
bias-pull-up;
};
};
wlan_hostwake_default_state: wlan-hostwake-default-state {
pins = "gpio66";
function = "gpio";
drive-strength = <2>;
bias-disable;
input-enable;
};
wlan_regulator_default_state: wlan-regulator-default-state {
pins = "gpio110";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
&usb {
extcon = <&smbb>;
dr_mode = "peripheral";
status = "okay";
};
&usb_hs_phy {
extcon = <&smbb>;
v1p8-supply = <&pm8226_l10>;
v3p3-supply = <&pm8226_l20>;
};

9
arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
View File

@@ -13,6 +13,7 @@
/ {
model = "LG G Watch R";
compatible = "lg,lenok", "qcom,apq8026";
chassis-type = "watch";
qcom,board-id = <132 0x0a>;
qcom,msm-id = <199 0x20000>;
@@ -115,7 +116,7 @@
};
&rpm_requests {
pm8226-regulators {
regulators {
compatible = "qcom,rpm-pm8226-regulators";
pm8226_s3: s3 {
@@ -299,8 +300,8 @@
input-enable;
};
touch_pins: touch {
irq {
touch_pins: touch-state {
irq-pins {
pins = "gpio17";
function = "gpio";
@@ -309,7 +310,7 @@
input-enable;
};
reset {
reset-pins {
pins = "gpio16";
function = "gpio";

453
arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts Normal file
View File

@@ -0,0 +1,453 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "qcom-msm8226.dtsi"
#include "qcom-pm8226.dtsi"
/ {
model = "Samsung Galaxy Tab 4 10.1";
compatible = "samsung,matisse-wifi", "qcom,apq8026";
chassis-type = "tablet";
aliases {
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
mmc1 = &sdhc_2; /* SDC2 SD card slot */
display0 = &framebuffer0;
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
stdout-path = "display0";
framebuffer0: framebuffer@3200000 {
compatible = "simple-framebuffer";
reg = <0x03200000 0x800000>;
width = <1280>;
height = <800>;
stride = <(1280 * 3)>;
format = "r8g8b8";
};
};
gpio-hall-sensor {
compatible = "gpio-keys";
event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
debounce-interval = <15>;
wakeup-source;
};
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
key-home {
label = "Home";
gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
debounce-interval = <15>;
};
key-volume-down {
label = "Volume Down";
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <15>;
};
key-volume-up {
label = "Volume Up";
gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
};
reg_tsp_1p8v: regulator-tsp-1p8v {
compatible = "regulator-fixed";
regulator-name = "tsp_1p8v";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&tsp_en_default_state>;
};
reg_tsp_3p3v: regulator-tsp-3p3v {
compatible = "regulator-fixed";
regulator-name = "tsp_3p3v";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&tsp_en1_default_state>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer@3200000 {
reg = <0x03200000 0x800000>;
no-map;
};
mpss@8400000 {
reg = <0x08400000 0x1f00000>;
no-map;
};
mba@a300000 {
reg = <0x0a300000 0x100000>;
no-map;
};
reserved@cb00000 {
reg = <0x0cb00000 0x700000>;
no-map;
};
wcnss@d200000 {
reg = <0x0d200000 0x700000>;
no-map;
};
adsp@d900000 {
reg = <0x0d900000 0x1800000>;
no-map;
};
venus@f100000 {
reg = <0x0f100000 0x500000>;
no-map;
};
/delete-node/ smem@3000000;
smem_region: smem@fa00000 {
reg = <0x0fa00000 0x100000>;
no-map;
};
reserved@fb00000 {
reg = <0x0fb00000 0x260000>;
no-map;
};
rfsa@fd60000 {
reg = <0x0fd60000 0x20000>;
no-map;
};
rmtfs@fd80000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0fd80000 0x180000>;
no-map;
qcom,client-id = <1>;
};
};
};
&blsp1_i2c2 {
status = "okay";
accelerometer@1d {
compatible = "st,lis2hh12";
reg = <0x1d>;
interrupt-parent = <&tlmm>;
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&accel_int_default_state>;
st,drdy-int-pin = <1>;
vdd-supply = <&pm8226_l19>;
vddio-supply = <&pm8226_lvs1>;
};
};
&blsp1_i2c4 {
status = "okay";
muic: usb-switch@25 {
compatible = "siliconmitus,sm5502-muic";
reg = <0x25>;
interrupt-parent = <&tlmm>;
interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&muic_int_default_state>;
};
};
&blsp1_i2c5 {
status = "okay";
touchscreen@4a {
compatible = "atmel,maxtouch";
reg = <0x4a>;
interrupt-parent = <&tlmm>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tsp_int_rst_default_state>;
reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
vdd-supply = <&reg_tsp_1p8v>;
vdda-supply = <&reg_tsp_3p3v>;
};
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm8226-regulators";
pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
pm8226_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_s5: s5 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
pm8226_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l3: l3 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1337500>;
regulator-always-on;
};
pm8226_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l5: l5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
pm8226_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1850000>;
};
pm8226_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
pm8226_l9: l9 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l14: l14 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
pm8226_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
pm8226_l16: l16 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3350000>;
};
pm8226_l17: l17 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
regulator-always-on;
};
pm8226_l18: l18 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3000000>;
};
pm8226_l20: l20 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
pm8226_l21: l21 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l22: l22 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
pm8226_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
pm8226_l24: l24 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
pm8226_l25: l25 {
regulator-min-microvolt = <1775000>;
regulator-max-microvolt = <2125000>;
};
pm8226_l26: l26 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1300000>;
};
pm8226_l27: l27 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l28: l28 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_lvs1: lvs1 {};
};
};
&sdhc_1 {
vmmc-supply = <&pm8226_l17>;
vqmmc-supply = <&pm8226_l6>;
bus-width = <8>;
non-removable;
status = "okay";
};
&sdhc_2 {
vmmc-supply = <&pm8226_l18>;
vqmmc-supply = <&pm8226_l21>;
bus-width = <4>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
status = "okay";
};
&tlmm {
accel_int_default_state: accel-int-default-state {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
muic_int_default_state: muic-int-default-state {
pins = "gpio67";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tsp_en_default_state: tsp-en-default-state {
pins = "gpio31";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tsp_en1_default_state: tsp-en1-default-state {
pins = "gpio73";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tsp_int_rst_default_state: tsp-int-rst-default-state {
pins = "gpio17";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
&usb {
extcon = <&muic>, <&muic>;
status = "okay";
};
&usb_hs_phy {
extcon = <&muic>;
v1p8-supply = <&pm8226_l10>;
v3p3-supply = <&pm8226_l20>;
};

1778
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
View File

File diff suppressed because it is too large Load Diff

560
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
View File

@@ -6,6 +6,7 @@
/ {
model = "Asus Nexus7(flo)";
compatible = "asus,nexus7-flo", "qcom,apq8064";
chassis-type = "tablet";
aliases {
serial0 = &gsbi7_serial;
@@ -30,7 +31,7 @@
};
};
ext_3p3v: regulator-fixed@1 {
ext_3p3v: regulator-ext-3p3v {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -57,290 +58,6 @@
};
soc {
rpm@108000 {
regulators {
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vin_lvs2-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
vdd_ncp-supply = <&pm8921_l6>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
/* msm otg HSUSB_VDDCX */
s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
};
/*
* msm_sdcc.1-sdc-vdd_io
* tabla2x-slim-CDC_VDDA_RX
* tabla2x-slim-CDC_VDDA_TX
* tabla2x-slim-CDC_VDD_CP
* tabla2x-slim-VDDIO_CDC
*/
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
/* mipi_dsi.1-dsi1_pll_vdda */
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/* msm_otg-HSUSB_3p3 */
l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
/* msm_otg-HSUSB_1p8 */
l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
/* msm_sdcc.1-sdc_vdd */
l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-always-on;
bias-pull-down;
};
l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
/* mipi_dsi.1-dsi1_avdd */
l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
regulator-always-on;
};
/* pwm_power for backlight */
l17 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
/* camera, qdsp6 */
l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
/*
* tabla2x-slim-CDC_VDDA_A_1P2V
* tabla2x-slim-VDDD_CDC_D
*/
l25 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
lvs1 {
bias-pull-down;
};
lvs4 {
bias-pull-down;
};
lvs5 {
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
/*
* mipi_dsi.1-dsi1_vddio
* pil_riva-pll_vdd
*/
lvs7 {
bias-pull-down;
};
};
};
mdp@5100000 {
status = "okay";
ports {
port@1 {
mdp_dsi1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
dsi0: dsi@4700000 {
status = "okay";
vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
vdd-supply = <&pm8921_l8>;
vddio-supply = <&pm8921_lvs7>;
avdd-supply = <&pm8921_l11>;
panel@0 {
reg = <0>;
compatible = "jdi,lt070me05000";
vddp-supply = <&pm8921_l17>;
iovcc-supply = <&pm8921_lvs7>;
enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
ports {
port@0 {
dsi0_in: endpoint {
remote-endpoint = <&mdp_dsi1_out>;
};
};
port@1 {
dsi0_out: endpoint {
remote-endpoint = <&panel_in>;
data-lanes = <0 1 2 3>;
};
};
};
};
dsi-phy@4700200 {
status = "okay";
vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
};
gsbi@16200000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@16280000 {
status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
trackpad@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
interrupt-parent = <&tlmm_pinmux>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
};
};
};
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
pagesize = <32>;
};
bq27541@55 {
compatible = "ti,bq27541";
reg = <0x55>;
};
};
};
gsbi@16500000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16540000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
};
};
gsbi@16600000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "okay";
};
};
/* OTG */
usb@12500000 {
status = "okay";
dr_mode = "otg";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
};
};
amba {
/* eMMC */
mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
};
sram@2a03f000 {
compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
reg = <0x2a03f000 0x1000>;
@@ -356,3 +73,276 @@
};
};
};
&dsi0 {
vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
vdd-supply = <&pm8921_l8>;
vddio-supply = <&pm8921_lvs7>;
avdd-supply = <&pm8921_l11>;
status = "okay";
panel@0 {
reg = <0>;
compatible = "jdi,lt070me05000";
vddp-supply = <&pm8921_l17>;
iovcc-supply = <&pm8921_lvs7>;
enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};
&dsi0_in {
remote-endpoint = <&mdp_dsi1_out>;
};
&dsi0_out {
remote-endpoint = <&panel_in>;
data-lanes = <0 1 2 3>;
};
&dsi0_phy {
vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
status = "okay";
};
&gsbi1 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
&gsbi1_i2c {
status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
pagesize = <32>;
};
bq27541@55 {
compatible = "ti,bq27541";
reg = <0x55>;
};
};
&gsbi3 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
&gsbi3_i2c {
clock-frequency = <200000>;
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
status = "okay";
trackpad@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
interrupt-parent = <&tlmm_pinmux>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
};
};
&gsbi6 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
&gsbi6_serial {
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
status = "okay";
};
&gsbi7 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
&gsbi7_serial {
status = "okay";
};
&mdp {
status = "okay";
};
/* eMMC */
&sdcc1 {
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
status = "okay";
};
&mdp_dsi1_out {
remote-endpoint = <&dsi0_in>;
};
&rpm {
regulators {
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vin_lvs2-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
vdd_ncp-supply = <&pm8921_l6>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
/* msm otg HSUSB_VDDCX */
s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
};
/*
* msm_sdcc.1-sdc-vdd_io
* tabla2x-slim-CDC_VDDA_RX
* tabla2x-slim-CDC_VDDA_TX
* tabla2x-slim-CDC_VDD_CP
* tabla2x-slim-VDDIO_CDC
*/
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
/* mipi_dsi.1-dsi1_pll_vdda */
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/* msm_otg-HSUSB_3p3 */
l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
/* msm_otg-HSUSB_1p8 */
l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
/* msm_sdcc.1-sdc_vdd */
l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-always-on;
bias-pull-down;
};
l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
/* mipi_dsi.1-dsi1_avdd */
l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
regulator-always-on;
};
/* pwm_power for backlight */
l17 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
/* camera, qdsp6 */
l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
/*
* tabla2x-slim-CDC_VDDA_A_1P2V
* tabla2x-slim-VDDD_CDC_D
*/
l25 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
lvs1 {
bias-pull-down;
};
lvs4 {
bias-pull-down;
};
lvs5 {
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
/*
* mipi_dsi.1-dsi1_vddio
* pil_riva-pll_vdd
*/
lvs7 {
bias-pull-down;
};
};
};
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
/* OTG */
&usb1 {
dr_mode = "otg";
status = "okay";
};

418
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
View File

@@ -15,232 +15,216 @@
stdout-path = "serial0:115200n8";
};
pwrseq {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
sdcc4_pwrseq: sdcc4_pwrseq {
pinctrl-names = "default";
pinctrl-0 = <&wlan_default_gpios>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
};
sdcc4_pwrseq: pwrseq-sdcc4 {
pinctrl-names = "default";
pinctrl-0 = <&wlan_default_gpios>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
};
soc {
pinctrl@800000 {
card_detect: card_detect {
mux {
pins = "gpio26";
function = "gpio";
bias-disable;
};
};
/* on board fixed 3.3v supply */
v3p3_fixed: regulator-v3p3 {
compatible = "regulator-fixed";
regulator-name = "PCIE V3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
pcie_pins: pcie_pinmux {
mux {
pins = "gpio27";
function = "gpio";
};
conf {
pins = "gpio27";
drive-strength = <12>;
bias-disable;
};
};
};
&gsbi1 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
rpm@108000 {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
&gsbi1_i2c {
clock-frequency = <200000>;
status = "okay";
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <32>;
};
};
&gsbi7 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
&gsbi7_serial {
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
status = "okay";
};
s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
&pcie {
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&v3p3_fixed>;
pinctrl-0 = <&pcie_pins>;
pinctrl-names = "default";
perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
pm8921_lvs6: lvs6 {
bias-pull-down;
};
};
};
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <32>;
};
};
};
gsbi@16600000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
};
};
/* OTG */
usb@12500000 {
status = "okay";
dr_mode = "otg";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
};
};
usb@12520000 {
status = "okay";
dr_mode = "host";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
};
};
usb@12530000 {
status = "okay";
dr_mode = "host";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
};
};
/* on board fixed 3.3v supply */
v3p3_fixed: v3p3 {
compatible = "regulator-fixed";
regulator-name = "PCIE V3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
wlan_default_gpios: wlan-gpios-state {
pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
power-source = <PM8921_GPIO_S4>;
};
};
};
};
};
pci@1b500000 {
status = "okay";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&v3p3_fixed>;
pinctrl-0 = <&pcie_pins>;
pinctrl-names = "default";
perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
};
amba {
/* eMMC */
sdcc1: mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
/* External micro SD card */
sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@121c0000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
vqmmc-supply = <&v3p3_fixed>;
mmc-pwrseq = <&sdcc4_pwrseq>;
};
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
power-source = <PM8921_GPIO_S4>;
};
};
};
&rpm {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
};
};
/* eMMC */
&sdcc1 {
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
status = "okay";
};
/* External micro SD card */
&sdcc3 {
vmmc-supply = <&v3p3_fixed>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* WLAN */
&sdcc4 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
vqmmc-supply = <&v3p3_fixed>;
mmc-pwrseq = <&sdcc4_pwrseq>;
};
&tlmm_pinmux {
card_detect: card_detect {
mux {
pins = "gpio26";
function = "gpio";
bias-disable;
};
};
pcie_pins: pcie_pinmux {
mux {
pins = "gpio27";
function = "gpio";
};
conf {
pins = "gpio27";
drive-strength = <12>;
bias-disable;
};
};
};
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
&usb_hs3_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
&usb_hs4_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
/* OTG */
&usb1 {
dr_mode = "otg";
status = "okay";
};
&usb3 {
dr_mode = "host";
status = "okay";
};
&usb4 {
dr_mode = "host";
status = "okay";
};

635
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
View File

@@ -22,23 +22,12 @@
stdout-path = "serial0:115200n8";
};
pwrseq {
compatible = "simple-bus";
sdcc4_pwrseq: sdcc4_pwrseq {
pinctrl-names = "default";
pinctrl-0 = <&wlan_default_gpios>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&notify_led>;
led@1 {
led-user1 {
label = "apq8064:green:user1";
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
@@ -57,326 +46,314 @@
};
};
soc {
pinctrl@800000 {
card_detect: card_detect {
mux {
pins = "gpio26";
function = "gpio";
bias-disable;
};
};
sdcc4_pwrseq: pwrseq-sdcc4 {
pinctrl-names = "default";
pinctrl-0 = <&wlan_default_gpios>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
};
pcie_pins: pcie_pinmux {
mux {
pins = "gpio27";
function = "gpio";
};
conf {
pins = "gpio27";
drive-strength = <12>;
bias-disable;
};
};
ext_3p3v: regulator-ext-3p3v {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "ext_3p3v";
regulator-type = "voltage";
startup-delay-us = <0>;
gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
};
&gsbi1 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
&gsbi1_i2c {
clock-frequency = <200000>;
status = "okay";
eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
pagesize = <32>;
};
};
&gsbi3 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
&gsbi3_i2c {
status = "okay";
};
&gsbi4 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
/* CAM I2C MIPI-CSI connector */
&gsbi4_i2c {
status = "okay";
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
};
&gsbi5_spi {
num-cs = <1>;
cs-gpios = <&tlmm_pinmux 53 0>;
status = "okay";
};
&gsbi6 {
qcom,mode = <GSBI_PROT_UART_W_FC>;
status = "okay";
};
&gsbi6_serial {
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
status = "okay";
};
&gsbi7 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
&gsbi7_serial {
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
status = "okay";
};
&hdmi {
core-vdda-supply = <&pm8921_hdmi_switch>;
hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&hdmi_in {
remote-endpoint = <&mdp_dtv_out>;
};
&hdmi_out {
remote-endpoint = <&hdmi_con>;
};
&hdmi_phy {
status = "okay";
core-vdda-supply = <&pm8921_hdmi_switch>;
};
&mdp {
status = "okay";
};
&mdp_dtv_out {
remote-endpoint = <&hdmi_in>;
};
&pcie {
status = "okay";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&ext_3p3v>;
pinctrl-0 = <&pcie_pins>;
pinctrl-names = "default";
perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
};
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
power-source = <PM8921_GPIO_S4>;
};
};
rpm@108000 {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
lvs1 {
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
};
};
ext_3p3v: regulator-fixed@1 {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "ext_3p3v";
regulator-type = "voltage";
startup-delay-us = <0>;
gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
gsbi3: gsbi@16200000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@16280000 {
status = "okay";
};
};
gsbi@16300000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
/* CAM I2C MIPI-CSI connector */
i2c@16380000 {
status = "okay";
};
};
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
pagesize = <32>;
};
};
};
gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
num-cs = <1>;
cs-gpios = <&tlmm_pinmux 53 0>;
};
};
gsbi@16500000 {
status = "okay";
qcom,mode = <GSBI_PROT_UART_W_FC>;
serial@16540000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
};
};
gsbi@16600000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
};
};
sata_phy0: phy@1b400000 {
status = "okay";
};
sata0: sata@29000000 {
status = "okay";
target-supply = <&pm8921_s4>;
};
/* OTG */
usb@12500000 {
status = "okay";
dr_mode = "otg";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
};
};
usb@12520000 {
status = "okay";
dr_mode = "host";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
};
};
usb@12530000 {
status = "okay";
dr_mode = "host";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
};
};
pci@1b500000 {
status = "okay";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&ext_3p3v>;
pinctrl-0 = <&pcie_pins>;
pinctrl-names = "default";
perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
};
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
wlan_default_gpios: wlan-gpios-state {
pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
power-source = <PM8921_GPIO_S4>;
};
};
notify_led: nled-state {
pinconf {
pins = "gpio18";
function = "normal";
bias-disable;
power-source = <PM8921_GPIO_S4>;
};
};
};
};
};
amba {
/* eMMC */
sdcc1: mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
/* External micro SD card */
sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@121c0000 {
status = "okay";
vmmc-supply = <&ext_3p3v>;
vqmmc-supply = <&pm8921_lvs1>;
mmc-pwrseq = <&sdcc4_pwrseq>;
};
};
hdmi-tx@4a00000 {
status = "okay";
core-vdda-supply = <&pm8921_hdmi_switch>;
hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
endpoint {
remote-endpoint = <&mdp_dtv_out>;
};
};
port@1 {
endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
hdmi-phy@4a00400 {
status = "okay";
core-vdda-supply = <&pm8921_hdmi_switch>;
};
mdp@5100000 {
status = "okay";
ports {
port@3 {
endpoint {
remote-endpoint = <&hdmi_in>;
};
};
};
notify_led: nled-state {
pinconf {
pins = "gpio18";
function = "normal";
bias-disable;
power-source = <PM8921_GPIO_S4>;
};
};
};
&rpm {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
lvs1 {
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
};
};
&sata_phy0 {
status = "okay";
};
&sata0 {
target-supply = <&pm8921_s4>;
status = "okay";
};
/* eMMC */
&sdcc1 {
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
status = "okay";
};
/* External micro SD card */
&sdcc3 {
vmmc-supply = <&pm8921_l6>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* WLAN */
&sdcc4 {
vmmc-supply = <&ext_3p3v>;
vqmmc-supply = <&pm8921_lvs1>;
mmc-pwrseq = <&sdcc4_pwrseq>;
status = "okay";
};
&tlmm_pinmux {
card_detect: card_detect {
mux {
pins = "gpio26";
function = "gpio";
bias-disable;
};
};
pcie_pins: pcie_pinmux {
mux {
pins = "gpio27";
function = "gpio";
};
conf {
pins = "gpio27";
drive-strength = <12>;
bias-disable;
};
};
};
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
&usb_hs3_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
&usb_hs4_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
/* OTG */
&usb1 {
dr_mode = "otg";
status = "okay";
};
&usb3 {
dr_mode = "host";
status = "okay";
};
&usb4 {
dr_mode = "host";
status = "okay";
};

642
arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
View File

@@ -8,6 +8,7 @@
/ {
model = "Sony Xperia Z";
compatible = "sony,xperia-yuga", "qcom,apq8064";
chassis-type = "handset";
aliases {
serial0 = &gsbi5_serial;
@@ -51,351 +52,338 @@
linux,code = <KEY_VOLUMEUP>;
};
};
};
soc {
pinctrl@800000 {
gsbi5_uart_pin_a: gsbi5-uart-pin-active {
rx {
pins = "gpio52";
function = "gsbi5";
drive-strength = <2>;
bias-pull-up;
};
&gsbi5 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
tx {
pins = "gpio51";
function = "gsbi5";
drive-strength = <4>;
bias-disable;
};
};
&gsbi5_serial {
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_pin_a>;
status = "okay";
};
&pm8921_gpio {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
function = "normal";
sdcc3_cd_pin_a: sdcc3-cd-pin-active {
pins = "gpio26";
function = "gpio";
bias-pull-up;
drive-push-pull;
input-enable;
power-source = <2>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
qcom,pull-up-strength = <0>;
};
};
drive-strength = <2>;
bias-disable;
};
&riva {
pinctrl-names = "default";
pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
status = "okay";
};
&rpm {
regulators {
vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs_1_3_6-supply = <&pm8921_s4>;
vin_lvs_4_5_7-supply = <&pm8921_s4>;
vin_ncp-supply = <&pm8921_l6>;
vin_lvs2-supply = <&pm8921_s4>;
vin_l24-supply = <&pm8921_s1>;
vin_l25-supply = <&pm8921_s1>;
vin_l27-supply = <&pm8921_s7>;
vin_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
rpm@108000 {
regulators {
vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs_1_3_6-supply = <&pm8921_s4>;
vin_lvs_4_5_7-supply = <&pm8921_s4>;
vin_ncp-supply = <&pm8921_l6>;
vin_lvs2-supply = <&pm8921_s4>;
vin_l24-supply = <&pm8921_s1>;
vin_l25-supply = <&pm8921_s1>;
vin_l27-supply = <&pm8921_s7>;
vin_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
s8 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
};
/* PMOS LDO */
l1 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
bias-pull-down;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l10 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
l17 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
l18 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l21 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
l22 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
l25 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
l27 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
l28 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
l29 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
/* Low Voltage Switch */
lvs1 {
bias-pull-down;
};
lvs2 {
bias-pull-down;
};
lvs3 {
bias-pull-down;
};
lvs4 {
bias-pull-down;
};
lvs5 {
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
lvs7 {
bias-pull-down;
};
usb-switch {};
hdmi-switch {};
ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
};
};
s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
function = "normal";
bias-pull-up;
drive-push-pull;
input-enable;
power-source = <2>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
qcom,pull-up-strength = <0>;
};
};
};
s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
usb@12500000 {
status = "okay";
dr_mode = "otg";
ulpi {
phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
};
s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
gsbi@1a200000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@1a240000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_pin_a>;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
amba {
sdcc1: mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
};
s8 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
};
riva-pil@3204000 {
status = "okay";
/* PMOS LDO */
l1 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
bias-pull-down;
};
pinctrl-names = "default";
pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l10 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
l17 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
l18 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l21 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
l22 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
l25 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
l27 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
l28 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
l29 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
/* Low Voltage Switch */
lvs1 {
bias-pull-down;
};
lvs2 {
bias-pull-down;
};
lvs3 {
bias-pull-down;
};
lvs4 {
bias-pull-down;
};
lvs5 {
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
lvs7 {
bias-pull-down;
};
usb-switch {};
hdmi-switch {};
ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
};
};
};
&sdcc1 {
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
status = "okay";
};
&sdcc3 {
vmmc-supply = <&pm8921_l6>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
status = "okay";
};
&tlmm_pinmux {
gsbi5_uart_pin_a: gsbi5-uart-pin-active {
rx {
pins = "gpio52";
function = "gsbi5";
drive-strength = <2>;
bias-pull-up;
};
tx {
pins = "gpio51";
function = "gsbi5";
drive-strength = <4>;
bias-disable;
};
};
sdcc3_cd_pin_a: sdcc3-cd-pin-active {
pins = "gpio26";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
&usb1 {
dr_mode = "otg";
status = "okay";
};

149
arch/arm/boot/dts/qcom-apq8064.dtsi
View File

@@ -672,7 +672,7 @@
reg = <0x00c00000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pm8821: pmic@1 {
pm8821: pmic {
compatible = "qcom,pm8821";
interrupt-parent = <&tlmm_pinmux>;
interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
@@ -693,12 +693,12 @@
};
};
qcom,ssbi@500000 {
ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pmicintc: pmic@0 {
pmicintc: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&tlmm_pinmux>;
interrupts = <74 8>;
@@ -884,7 +884,7 @@
reg = <0x2011000 0x1000>;
};
rpm@108000 {
rpm: rpm@108000 {
compatible = "qcom,rpm-apq8064";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
@@ -1085,15 +1085,21 @@
ports-implemented = <0x1>;
};
/* Temporary fixed regulator */
sdcc1bam: dma-controller@12402000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
no-1-8-v;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
sdcc3bam: dma-controller@12182000{
@@ -1106,6 +1112,24 @@
qcom,ee = <0>;
};
sdcc4: mmc@121c0000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x121c0000 0x2000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&sdc4_gpios>;
};
sdcc4bam: dma-controller@121c2000{
compatible = "qcom,bam-v1.3.0";
reg = <0x121c2000 0x8000>;
@@ -1116,67 +1140,33 @@
qcom,ee = <0>;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
pinctrl-names = "default";
pinctrl-0 = <&sdcc1_pins>;
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
};
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
pinctrl-names = "default";
pinctrl-0 = <&sdcc1_pins>;
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
no-1-8-v;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
sdcc4: mmc@121c0000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x121c0000 0x2000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&sdc4_gpios>;
};
sdcc1bam: dma-controller@12402000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
tcsr: syscon@1a400000 {
@@ -1316,7 +1306,6 @@
<&dsi0_phy 1>;
syscon-sfpb = <&mmss_sfpb>;
phys = <&dsi0_phy>;
phy-names = "dsi";
status = "disabled";
ports {
@@ -1338,7 +1327,7 @@
};
dsi0_phy: dsi-phy@4700200 {
dsi0_phy: phy@4700200 {
compatible = "qcom,dsi-phy-28nm-8960";
#clock-cells = <1>;
#phy-cells = <0>;
@@ -1470,6 +1459,8 @@
phys = <&hdmi_phy>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1488,7 +1479,7 @@
};
};
hdmi_phy: hdmi-phy@4a00400 {
hdmi_phy: phy@4a00400 {
compatible = "qcom,hdmi-phy-8960";
reg = <0x4a00400 0x60>,
<0x4a00500 0x100>;
@@ -1498,6 +1489,8 @@
clocks = <&mmcc HDMI_S_AHB_CLK>;
clock-names = "slave_iface";
#phy-cells = <0>;
status = "disabled";
};
mdp: mdp@5100000 {
@@ -1552,7 +1545,7 @@
};
};
riva: riva-pil@3204000 {
riva: riva-pil@3200800 {
compatible = "qcom,riva-pil";
reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
@@ -1615,7 +1608,7 @@
};
etb@1a01000 {
compatible = "coresight-etb10", "arm,primecell";
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x1a01000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;

60
arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
View File

@@ -35,30 +35,8 @@
};
};
&otg {
status = "okay";
phys = <&usb_hs2_phy>;
phy-select = <&tcsr 0xb000 1>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@b {
status = "okay";
v3p3-supply = <&pm8941_l24>;
v1p8-supply = <&pm8941_l6>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x63>;
};
};
};
&rpm_requests {
pm8841-regulators {
regulators-0 {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {
@@ -82,7 +60,7 @@
};
};
pm8941-regulators {
regulators-1 {
compatible = "qcom,rpm-pm8941-regulators";
vdd_l1_l3-supply = <&pm8941_s1>;
@@ -272,34 +250,34 @@
};
&tlmm {
sdc1_on: sdc1-on {
clk {
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_on: sdc2-on {
clk {
sdc2_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
cd {
cd-pins {
pins = "gpio62";
function = "gpio";
drive-strength = <2>;
@@ -307,3 +285,23 @@
};
};
};
&usb {
status = "okay";
phys = <&usb_hs2_phy>;
phy-select = <&tcsr 0xb000 1>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
};
&usb_hs2_phy {
status = "okay";
v3p3-supply = <&pm8941_l24>;
v1p8-supply = <&pm8941_l6>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x63>;
};

10
arch/arm/boot/dts/qcom-apq8084.dtsi
View File

@@ -72,7 +72,7 @@
};
L2: l2-cache {
compatible = "qcom,arch-cache";
compatible = "cache";
cache-level = <2>;
qcom,saw = <&saw_l2>;
};
@@ -258,12 +258,14 @@
};
tsens: thermal-sensor@fc4a8000 {
compatible = "qcom,msm8974-tsens";
compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
reg = <0xfc4a9000 0x1000>, /* TM */
<0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
#qcom,sensors = <11>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
timer@f9020000 {
@@ -394,7 +396,7 @@
#hwlock-cells = <1>;
};
rpm_msg_ram: memory@fc428000 {
rpm_msg_ram: sram@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
@@ -474,7 +476,7 @@
compatible = "qcom,rpm-apq8084";
qcom,smd-channels = "rpm_requests";
pma8084-regulators {
regulators-0 {
compatible = "qcom,rpm-pma8084-regulators";
pma8084_s1: s1 {};

6
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
View File

@@ -9,7 +9,7 @@
leds {
compatible = "gpio-leds";
power {
led-power {
label = "ap120c-ac:green:power";
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
@@ -17,14 +17,14 @@
default-state = "on";
};
wlan {
led-wlan {
label = "ap120c-ac:green:wlan";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
support {
led-support {
label = "ap120c-ac:green:support";
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;

6
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
View File

@@ -7,7 +7,7 @@
leds {
compatible = "gpio-leds";
status: status {
status: led-status {
label = "ap120c-ac:blue:status";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
@@ -15,7 +15,7 @@
default-state = "keep";
};
wlan2g {
led-wlan2g {
label = "ap120c-ac:green:wlan2g";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
@@ -23,7 +23,7 @@
linux,default-trigger = "phy0tpt";
};
wlan5g {
led-wlan5g {
label = "ap120c-ac:red:wlan5g";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_RED>;

2
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
View File

@@ -6,7 +6,7 @@
/ {
model = "ALFA Network AP120C-AC";
compatible = "alfa-network,ap120c-ac";
compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
keys {
compatible = "gpio-keys";

2
arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
View File

@@ -7,7 +7,7 @@
/ {
model = "8devices Jalapeno";
compatible = "8dev,jalapeno";
compatible = "8dev,jalapeno", "qcom,ipq4018";
};
&tlmm {

2
arch/arm/boot/dts/qcom-ipq4019.dtsi
View File

@@ -348,7 +348,7 @@
saw0: regulator@b089000 {
compatible = "qcom,saw2";
reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
regulator;
};
saw1: regulator@b099000 {

5
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
View File

@@ -5,7 +5,7 @@
/ {
model = "MikroTik RB3011UiAS-RM";
compatible = "mikrotik,rb3011";
compatible = "mikrotik,rb3011", "qcom,ipq8064";
aliases {
serial0 = &gsbi7_serial;
@@ -264,8 +264,7 @@
&nand {
status = "okay";
nandcs@0 {
compatible = "qcom,nandcs";
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;

7
arch/arm/boot/dts/qcom-ipq8064.dtsi
View File

@@ -513,8 +513,8 @@
gcc: clock-controller@900000 {
compatible = "qcom,gcc-ipq8064", "syscon";
clocks = <&pxo_board>, <&cxo_board>;
clock-names = "pxo", "cxo";
clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
clock-names = "pxo", "cxo", "pll4";
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -728,7 +728,6 @@
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
@@ -748,7 +747,6 @@
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
@@ -756,7 +754,6 @@
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
mmc-ddr-1_8v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";

59
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
View File

@@ -1,46 +1,9 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Device Tree Source for mangOH Green Board with WP8548 Module
*
* Copyright (C) 2016 BayLibre, SAS.
* Author : Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/input/input.h>
@@ -82,8 +45,8 @@
* - 42: IOT0_GPIO1 and SD Card Detect
*/
gpioext1_pins: gpioext1_pins {
pins {
gpioext1_pins: gpioext1-state {
gpioext1-pins {
pins = "gpio2";
function = "gpio";
input-enable;
@@ -91,8 +54,8 @@
};
};
sdc_cd_pins: sdc_cd_pins {
pins {
sdc_cd_pins: sdc-cd-state {
sdc-cd-pins {
pins = "gpio42";
function = "gpio";
drive-strength = <2>;
@@ -153,7 +116,7 @@
#size-cells = <0>;
reg = <4>;
gpioext0: gpio@3e {
gpioext0: pinctrl@3e {
/* GPIO Expander 0 Mapping :
* - 0: ARDUINO_RESET_Level shift
* - 1: BattChrgr_PG_N
@@ -179,7 +142,7 @@
interrupt-parent = <&gpioext1>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
probe-reset;
semtech,probe-reset;
gpio-controller;
interrupt-controller;
@@ -191,7 +154,7 @@
#size-cells = <0>;
reg = <5>;
gpioext1: gpio@3f {
gpioext1: pinctrl@3f {
/* GPIO Expander 1 Mapping :
* - 0: GPIOEXP_INT1
* - 1: Battery detect
@@ -220,7 +183,7 @@
interrupt-parent = <&msmgpio>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
probe-reset;
semtech,probe-reset;
gpio-controller;
interrupt-controller;
@@ -232,7 +195,7 @@
#size-cells = <0>;
reg = <6>;
gpioext2: gpio@70 {
gpioext2: pinctrl@70 {
/* GPIO Expander 2 Mapping :
* - 0: USB_HUB_INTn
* - 1: HUB_CONNECT
@@ -258,7 +221,7 @@
interrupt-parent = <&gpioext1>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
probe-reset;
semtech,probe-reset;
gpio-controller;
interrupt-controller;

61
arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
View File

@@ -1,46 +1,9 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Device Tree Source for Sierra Wireless WP8548 Module
*
* Copyright (C) 2016 BayLibre, SAS.
* Author : Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "qcom-mdm9615.dtsi"
@@ -59,8 +22,8 @@
pinctrl-0 = <&reset_out_pins>;
pinctrl-names = "default";
gsbi3_pins: gsbi3_pins {
mux {
gsbi3_pins: gsbi3-state {
gsbi3-pins {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
function = "gsbi3";
drive-strength = <8>;
@@ -68,8 +31,8 @@
};
};
gsbi4_pins: gsbi4_pins {
mux {
gsbi4_pins: gsbi4-state {
gsbi4-pins {
pins = "gpio12", "gpio13", "gpio14", "gpio15";
function = "gsbi4";
drive-strength = <8>;
@@ -77,15 +40,15 @@
};
};
gsbi5_i2c_pins: gsbi5_i2c_pins {
pin16 {
gsbi5_i2c_pins: gsbi5-i2c-state {
sda-pins {
pins = "gpio16";
function = "gsbi5_i2c";
drive-strength = <8>;
bias-disable;
};
pin17 {
scl-pins {
pins = "gpio17";
function = "gsbi5_i2c";
drive-strength = <2>;
@@ -93,8 +56,8 @@
};
};
gsbi5_uart_pins: gsbi5_uart_pins {
mux {
gsbi5_uart_pins: gsbi5-uart-state {
gsbi5-uart-pins {
pins = "gpio18", "gpio19";
function = "gsbi5_uart";
drive-strength = <8>;
@@ -102,8 +65,8 @@
};
};
reset_out_pins: reset_out_pins {
pins {
reset_out_pins: reset-out-state {
reset-out-pins {
pins = "gpio66";
function = "gpio";
drive-strength = <2>;

123
arch/arm/boot/dts/qcom-mdm9615.dtsi
View File

@@ -1,46 +1,9 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Device Tree Source for Qualcomm MDM9615 SoC
*
* Copyright (C) 2016 BayLibre, SAS.
* Author : Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -64,6 +27,7 @@
cpu0: cpu@0 {
compatible = "arm,cortex-a5";
reg = <0>;
device_type = "cpu";
next-level-cache = <&L2>;
};
@@ -206,7 +170,6 @@
#size-cells = <0>;
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <24000000>;
clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
clock-names = "core", "iface";
@@ -283,7 +246,7 @@
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pmicintc: pmic@0 {
pmicintc: pmic {
compatible = "qcom,pm8018", "qcom,pm8921";
interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
@@ -351,51 +314,43 @@
qcom,ee = <0>;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc1: mmc@12180000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
assigned-clocks = <&gcc SDC1_CLK>;
assigned-clock-rates = <400000>;
};
sdcc1: mmc@12180000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
assigned-clocks = <&gcc SDC1_CLK>;
assigned-clock-rates = <400000>;
};
sdcc2: mmc@12140000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12140000 0x2000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
dma-names = "tx", "rx";
assigned-clocks = <&gcc SDC2_CLK>;
assigned-clock-rates = <400000>;
};
sdcc2: mmc@12140000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12140000 0x2000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
dma-names = "tx", "rx";
assigned-clocks = <&gcc SDC2_CLK>;
assigned-clock-rates = <400000>;
};
tcsr: syscon@1a400000 {

1
arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
View File

@@ -8,6 +8,7 @@
/ {
model = "Samsung Galaxy S III Neo";
compatible = "samsung,s3ve3g", "qcom,msm8226";
chassis-type = "handset";
aliases {
serial0 = &blsp1_uart3;

78
arch/arm/boot/dts/qcom-msm8226.dtsi
View File

@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
@@ -298,6 +299,33 @@
#size-cells = <0>;
};
cci: cci@fda0c000 {
compatible = "qcom,msm8226-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfda0c000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_CLK>;
clock-names = "camss_top_ahb",
"cci_ahb",
"cci";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cci_default>;
pinctrl-1 = <&cci_sleep>;
status = "disabled";
cci_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
usb: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
@@ -344,6 +372,14 @@
#power-domain-cells = <1>;
};
mmcc: clock-controller@fd8c0000 {
compatible = "qcom,mmcc-msm8226";
reg = <0xfd8c0000 0x6000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,msm8226-pinctrl";
reg = <0xfd510000 0x4000>;
@@ -354,49 +390,65 @@
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
blsp1_i2c1_pins: blsp1-i2c1 {
blsp1_i2c1_pins: blsp1-i2c1-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c2_pins: blsp1-i2c2 {
blsp1_i2c2_pins: blsp1-i2c2-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c3_pins: blsp1-i2c3 {
blsp1_i2c3_pins: blsp1-i2c3-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c4_pins: blsp1-i2c4 {
blsp1_i2c4_pins: blsp1-i2c4-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c5_pins: blsp1-i2c5 {
blsp1_i2c5_pins: blsp1-i2c5-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
cci_default: cci-default-state {
pins = "gpio29", "gpio30";
function = "cci_i2c0";
drive-strength = <2>;
bias-disable;
};
cci_sleep: cci-sleep-state {
pins = "gpio29", "gpio30";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdhc1_default_state: sdhc1-default-state {
clk {
clk-pins {
pins = "sdc1_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
@@ -404,13 +456,13 @@
};
sdhc2_default_state: sdhc2-default-state {
clk {
clk-pins {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <10>;
bias-pull-up;
@@ -418,21 +470,21 @@
};
sdhc3_default_state: sdhc3-default-state {
clk {
clk-pins {
pins = "gpio44";
function = "sdc3";
drive-strength = <8>;
bias-disable;
};
cmd {
cmd-pins {
pins = "gpio43";
function = "sdc3";
drive-strength = <8>;
bias-pull-up;
};
data {
data-pins {
pins = "gpio39", "gpio40", "gpio41", "gpio42";
function = "sdc3";
drive-strength = <8>;
@@ -527,7 +579,7 @@
};
};
rpm_msg_ram: memory@fc428000 {
rpm_msg_ram: sram@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};

42
arch/arm/boot/dts/qcom-msm8660.dtsi
View File

@@ -316,7 +316,7 @@
};
};
external-bus@1a100000 {
ebi2: external-bus@1a100000 {
compatible = "qcom,msm8660-ebi2";
#address-cells = <2>;
#size-cells = <1>;
@@ -333,12 +333,12 @@
status = "disabled";
};
qcom,ssbi@500000 {
ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pm8058: pmic@0 {
pm8058: pmic {
compatible = "qcom,pm8058";
interrupt-parent = <&tlmm>;
interrupts = <88 8>;
@@ -379,7 +379,7 @@
pull-up;
};
keypad@148 {
pm8058_keypad: keypad@148 {
compatible = "qcom,pm8058-keypad";
reg = <0x148>;
interrupt-parent = <&pm8058>;
@@ -444,6 +444,31 @@
compatible = "qcom,pm8058-vib";
reg = <0x4a>;
};
pm8058_led48: led@48 {
compatible = "qcom,pm8058-keypad-led";
reg = <0x48>;
status = "disabled";
};
pm8058_led131: led@131 {
compatible = "qcom,pm8058-led";
reg = <0x131>;
status = "disabled";
};
pm8058_led132: led@132 {
compatible = "qcom,pm8058-led";
reg = <0x132>;
status = "disabled";
};
pm8058_led133: led@133 {
compatible = "qcom,pm8058-led";
reg = <0x133>;
status = "disabled";
};
};
};
@@ -471,7 +496,7 @@
clock-names = "pxo";
};
pm8901-regulators {
regulators-0 {
compatible = "qcom,rpm-pm8901-regulators";
pm8901_l0: l0 {};
@@ -495,7 +520,7 @@
pm8901_mvs: mvs {};
};
pm8058-regulators {
regulators-1 {
compatible = "qcom,rpm-pm8058-regulators";
pm8058_l0: l0 {};
@@ -549,7 +574,6 @@
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
@@ -565,7 +589,6 @@
arm,primecell-periphid = <0x00051180>;
reg = <0x12140000 0x8000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
@@ -580,7 +603,6 @@
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
@@ -596,7 +618,6 @@
status = "disabled";
reg = <0x121c0000 0x8000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
@@ -611,7 +632,6 @@
status = "disabled";
reg = <0x12200000 0x8000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;

23
arch/arm/boot/dts/qcom-msm8960-cdp.dts
View File

@@ -18,7 +18,7 @@
regulators {
compatible = "simple-bus";
ext_l2: gpio-regulator@91 {
ext_l2: gpio-regulator {
compatible = "regulator-fixed";
regulator-name = "ext_l2";
gpio = <&msmgpio 91 0>;
@@ -42,7 +42,7 @@
compatible = "micrel,ks8851";
reg = <0>;
interrupt-parent = <&msmgpio>;
interrupts = <90 8>;
interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <5400000>;
vdd-supply = <&ext_l2>;
vdd-io-supply = <&pm8921_lvs6>;
@@ -60,33 +60,32 @@
};
&msmgpio {
spi1_default: spi1_default {
mux {
pins = "gpio6", "gpio7", "gpio9";
function = "gsbi1";
};
mosi {
spi1_default: spi1-default-state {
mosi-pins {
pins = "gpio6";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
miso {
miso-pins {
pins = "gpio7";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
cs {
cs-pins {
pins = "gpio8";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
output-low;
};
clk {
clk-pins {
pins = "gpio9";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};

92
arch/arm/boot/dts/qcom-msm8960.dtsi
View File

@@ -17,7 +17,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <1 14 0x304>;
interrupts = <GIC_PPI 14 0x304>;
cpu@0 {
compatible = "qcom,krait";
@@ -52,7 +52,7 @@
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 10 0x304>;
interrupts = <GIC_PPI 10 0x304>;
qcom,no-pc-write;
};
@@ -105,9 +105,9 @@
timer@200a000 {
compatible = "qcom,kpss-timer",
"qcom,kpss-wdt-msm8960", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
<1 3 0x301>;
interrupts = <GIC_PPI 1 0x301>,
<GIC_PPI 2 0x301>,
<GIC_PPI 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
@@ -119,7 +119,7 @@
gpio-controller;
gpio-ranges = <&msmgpio 0 0 152>;
#gpio-cells = <2>;
interrupts = <0 16 0x4>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
@@ -247,15 +247,15 @@
};
};
qcom,ssbi@500000 {
ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pmicintc: pmic@0 {
pmicintc: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&msmgpio>;
interrupts = <104 8>;
interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
@@ -265,7 +265,8 @@
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pmicintc>;
interrupts = <50 1>, <51 1>;
interrupts = <50 IRQ_TYPE_EDGE_RISING>,
<51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -274,7 +275,8 @@
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
interrupt-parent = <&pmicintc>;
interrupts = <74 1>, <75 1>;
interrupts = <74 IRQ_TYPE_EDGE_RISING>,
<75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
@@ -283,7 +285,7 @@
rtc@11d {
compatible = "qcom,pm8921-rtc";
interrupt-parent = <&pmicintc>;
interrupts = <39 1>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
};
@@ -297,44 +299,36 @@
clock-names = "core";
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
};
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
};
tcsr: syscon@1a400000 {

83
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
View File

@@ -9,6 +9,7 @@
/ {
model = "LGE MSM 8974 HAMMERHEAD";
compatible = "lge,hammerhead", "qcom,msm8974";
chassis-type = "handset";
aliases {
serial0 = &blsp1_uart1;
@@ -247,31 +248,6 @@
status = "okay";
};
&otg {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&charger>, <&usb_id>;
vbus-supply = <&usb_otg_vbus>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3";
@@ -344,7 +320,7 @@
};
&rpm_requests {
pm8841-regulators {
regulators-0 {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {
@@ -368,7 +344,7 @@
};
};
pm8941-regulators {
regulators-1 {
compatible = "qcom,rpm-pm8941-regulators";
vdd_l1_l3-supply = <&pm8941_s1>;
@@ -573,43 +549,43 @@
};
&tlmm {
sdc1_on: sdc1-on {
clk {
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_on: sdc2-on {
clk {
sdc2_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <6>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
};
mpu6515_pin: mpu6515 {
mpu6515_pin: mpu6515-state {
pins = "gpio73";
function = "gpio";
bias-disable;
input-enable;
};
touch_pin: touch {
int {
touch_pin: touch-state {
int-pins {
pins = "gpio5";
function = "gpio";
@@ -618,7 +594,7 @@
input-enable;
};
reset {
reset-pins {
pins = "gpio8";
function = "gpio";
@@ -627,27 +603,50 @@
};
};
panel_pin: panel {
panel_pin: panel-state {
pins = "gpio12";
function = "mdp_vsync";
drive-strength = <2>;
bias-disable;
};
bt_pin: bt {
hostwake {
bt_pin: bt-state {
hostwake-pins {
pins = "gpio42";
function = "gpio";
};
devwake {
devwake-pins {
pins = "gpio62";
function = "gpio";
};
shutdown {
shutdown-pins {
pins = "gpio41";
function = "gpio";
};
};
};
&usb {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&charger>, <&usb_id>;
vbus-supply = <&usb_otg_vbus>;
hnp-disable;
srp-disable;
adp-disable;
};
&usb_hs1_phy {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};

1
arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
View File

@@ -4,6 +4,7 @@
/ {
model = "Sony Xperia Z1 Compact";
compatible = "sony,xperia-amami", "qcom,msm8974";
chassis-type = "handset";
};
&smbb {

1
arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
View File

@@ -4,4 +4,5 @@
/ {
model = "Sony Xperia Z1";
compatible = "sony,xperia-honami", "qcom,msm8974";
chassis-type = "handset";
};

70
arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
View File

@@ -132,31 +132,6 @@
/* sii8334 MHL HDMI bridge */
};
&otg {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
&pm8941_coincell {
status = "okay";
qcom,rset-ohms = <2100>;
@@ -178,7 +153,7 @@
qcom,power-source = <1>;
rgb-led {
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
@@ -214,7 +189,7 @@
};
&rpm_requests {
pm8841-regulators {
regulators-0 {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {
@@ -238,7 +213,7 @@
};
};
pm8941-regulators {
regulators-1 {
compatible = "qcom,rpm-pm8941-regulators";
vdd_l1_l3-supply = <&pm8941_s1>;
@@ -442,7 +417,7 @@
};
&tlmm {
ts_int_pin: touch-int {
ts_int_pin: touch-int-state {
pins = "gpio61";
function = "gpio";
drive-strength = <2>;
@@ -450,34 +425,34 @@
input-enable;
};
sdc1_on: sdc1-on {
clk {
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_on: sdc-on {
clk {
sdc2_on: sdc-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
cd {
cd-pins {
pins = "gpio62";
function = "gpio";
drive-strength = <2>;
@@ -485,3 +460,26 @@
};
};
};
&usb {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
};
&usb_hs1_phy {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};

174
arch/arm/boot/dts/qcom-msm8974.dtsi
View File

@@ -653,7 +653,7 @@
#size-cells = <0>;
};
otg: usb@f9a55000 {
usb: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
<0xf9a55200 0x200>;
@@ -679,7 +679,7 @@
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
reset-names = "phy", "por";
status = "disabled";
};
@@ -690,7 +690,7 @@
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
reset-names = "phy", "por";
status = "disabled";
};
@@ -1056,7 +1056,7 @@
reg = <0xfc400000 0x4000>;
};
rpm_msg_ram: memory@fc428000 {
rpm_msg_ram: sram@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
@@ -1116,7 +1116,7 @@
};
tsens: thermal-sensor@fc4a9000 {
compatible = "qcom,msm8974-tsens";
compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
reg = <0xfc4a9000 0x1000>, /* TM */
<0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
@@ -1194,7 +1194,7 @@
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";
qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
@@ -1233,13 +1233,14 @@
};
};
tcsr_mutex_block: syscon@fd484000 {
compatible = "syscon";
tcsr_mutex: hwlock@fd484000 {
compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
reg = <0xfd484000 0x2000>;
#hwlock-cells = <1>;
};
tcsr: syscon@fd4a0000 {
compatible = "syscon";
compatible = "qcom,tcsr-msm8974", "syscon";
reg = <0xfd4a0000 0x10000>;
};
@@ -1253,61 +1254,62 @@
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
sdc1_off: sdc1-off {
clk {
sdc1_off: sdc1-off-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
cmd {
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
data {
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_off: sdc2-off {
clk {
sdc2_off: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd {
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data {
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
cd {
cd-pins {
pins = "gpio54";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
};
blsp1_uart2_default: blsp1-uart2-default {
rx {
blsp1_uart2_default: blsp1-uart2-default-state {
rx-pins {
pins = "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-pull-up;
};
tx {
tx-pins {
pins = "gpio4";
function = "blsp_uart2";
drive-strength = <4>;
@@ -1315,15 +1317,15 @@
};
};
blsp2_uart1_default: blsp2-uart1-default {
tx-rts {
blsp2_uart1_default: blsp2-uart1-default-state {
tx-rts-pins {
pins = "gpio41", "gpio44";
function = "blsp_uart7";
drive-strength = <2>;
bias-disable;
};
rx-cts {
rx-cts-pins {
pins = "gpio42", "gpio43";
function = "blsp_uart7";
drive-strength = <2>;
@@ -1331,22 +1333,22 @@
};
};
blsp2_uart1_sleep: blsp2-uart1-sleep {
blsp2_uart1_sleep: blsp2-uart1-sleep-state {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp2_uart4_default: blsp2-uart4-default {
tx-rts {
blsp2_uart4_default: blsp2-uart4-default-state {
tx-rts-pins {
pins = "gpio53", "gpio56";
function = "blsp_uart10";
drive-strength = <2>;
bias-disable;
};
rx-cts {
rx-cts-pins {
pins = "gpio54", "gpio55";
function = "blsp_uart10";
drive-strength = <2>;
@@ -1354,42 +1356,42 @@
};
};
blsp1_i2c1_default: blsp1-i2c1-default {
blsp1_i2c1_default: blsp1-i2c1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c1_sleep: blsp1-i2c1-sleep {
blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c2_default: blsp1-i2c2-default {
blsp1_i2c2_default: blsp1-i2c2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c2_sleep: blsp1-i2c2-sleep {
blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c3_default: blsp1-i2c3-default {
blsp1_i2c3_default: blsp1-i2c3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c3_sleep: blsp1-i2c3-sleep {
blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
@@ -1400,14 +1402,14 @@
/* BLSP1_I2C5 info is missing */
blsp1_i2c6_default: blsp1-i2c6-default {
blsp1_i2c6_default: blsp1-i2c6-default-state {
pins = "gpio29", "gpio30";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c6_sleep: blsp1-i2c6-sleep {
blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
pins = "gpio29", "gpio30";
function = "blsp_i2c6";
drive-strength = <2>;
@@ -1417,14 +1419,14 @@
/* BLSP2_I2C1 info is missing */
blsp2_i2c2_default: blsp2-i2c2-default {
blsp2_i2c2_default: blsp2-i2c2-default-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c2_sleep: blsp2-i2c2-sleep {
blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c8";
drive-strength = <2>;
@@ -1435,48 +1437,80 @@
/* BLSP2_I2C4 info is missing */
blsp2_i2c5_default: blsp2-i2c5-default {
blsp2_i2c5_default: blsp2-i2c5-default-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c11";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c5_sleep: blsp2-i2c5-sleep {
blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c11";
drive-strength = <2>;
bias-pull-up;
};
blsp2_i2c6_default: blsp2-i2c6-default {
blsp2_i2c6_default: blsp2-i2c6-default-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c12";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c6_sleep: blsp2-i2c6-sleep {
blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c12";
drive-strength = <2>;
bias-pull-up;
};
spi8_default: spi8_default {
mosi {
cci_default: cci-default-state {
cci_i2c0_default: cci-i2c0-default-pins {
pins = "gpio19", "gpio20";
function = "cci_i2c0";
drive-strength = <2>;
bias-disable;
};
cci_i2c1_default: cci-i2c1-default-pins {
pins = "gpio21", "gpio22";
function = "cci_i2c1";
drive-strength = <2>;
bias-disable;
};
};
cci_sleep: cci-sleep-state {
cci_i2c0_sleep: cci-i2c0-sleep-pins {
pins = "gpio19", "gpio20";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
cci_i2c1_sleep: cci-i2c1-sleep-pins {
pins = "gpio21", "gpio22";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
spi8_default: spi8_default-state {
mosi-pins {
pins = "gpio45";
function = "blsp_spi8";
};
miso {
miso-pins {
pins = "gpio46";
function = "blsp_spi8";
};
cs {
cs-pins {
pins = "gpio47";
function = "blsp_spi8";
};
clk {
clk-pins {
pins = "gpio48";
function = "blsp_spi8";
};
@@ -1571,7 +1605,6 @@
"core_mmss";
phys = <&dsi0_phy>;
phy-names = "dsi-phy";
status = "disabled";
@@ -1597,7 +1630,7 @@
};
};
dsi0_phy: dsi-phy@fd922a00 {
dsi0_phy: phy@fd922a00 {
compatible = "qcom,dsi-phy-28nm-hpm";
reg = <0xfd922a00 0xd4>,
<0xfd922b00 0x280>,
@@ -1616,6 +1649,40 @@
};
};
cci: cci@fda0c000 {
compatible = "qcom,msm8974-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfda0c000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_CLK>;
clock-names = "camss_top_ahb",
"cci_ahb",
"cci";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cci_default>;
pinctrl-1 = <&cci_sleep>;
status = "disabled";
cci_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
cci_i2c1: i2c-bus@1 {
reg = <1>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
gpu: adreno@fdb00000 {
compatible = "qcom,adreno-330.1", "qcom,adreno";
reg = <0xfdb00000 0x10000>;
@@ -1703,8 +1770,6 @@
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
label = "lpass";
#address-cells = <1>;
#size-cells = <0>;
};
};
@@ -1719,13 +1784,6 @@
};
};
tcsr_mutex: tcsr-mutex {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_block 0 0x80>;
#hwlock-cells = <1>;
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;

75
arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
View File

@@ -8,7 +8,8 @@
/ {
model = "Fairphone 2";
compatible = "fairphone,fp2", "qcom,msm8974";
compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1;
@@ -85,31 +86,6 @@
};
};
&otg {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio1", "gpio2", "gpio5";
@@ -190,7 +166,7 @@
};
&rpm_requests {
pm8841-regulators {
regulators-0 {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {
@@ -209,7 +185,7 @@
};
};
pm8941-regulators {
regulators-1 {
compatible = "qcom,rpm-pm8941-regulators";
vdd_l1_l3-supply = <&pm8941_s1>;
@@ -408,36 +384,36 @@
};
&tlmm {
sdc1_on: sdc1-on {
clk {
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_on: sdc2-on {
clk {
sdc2_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
};
wcnss_pin_a: wcnss-pin-active {
wlan {
wcnss_pin_a: wcnss-pin-active-state {
wlan-pins {
pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
function = "wlan";
@@ -445,7 +421,7 @@
bias-pull-down;
};
bt {
bt-pins {
pins = "gpio35", "gpio43", "gpio44";
function = "bt";
@@ -453,7 +429,7 @@
bias-pull-down;
};
fm {
fm-pins {
pins = "gpio41", "gpio42";
function = "fm";
@@ -462,3 +438,26 @@
};
};
};
&usb {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
};
&usb_hs1_phy {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};

417
arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts Normal file
View File

@@ -0,0 +1,417 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "OnePlus One";
compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "handset";
qcom,msm-id = <194 0x10000>;
qcom,board-id = <8 0>;
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&blsp1_i2c1 {
status = "okay";
fuel-gauge@55 {
compatible = "ti,bq27541";
reg = <0x55>;
power-supplies = <&bq24196_charger>;
};
};
&blsp1_i2c2 {
status = "okay";
rmi4-i2c-dev@20 {
compatible = "syna,rmi4-i2c";
reg = <0x20>;
syna,startup-delay-ms = <100>;
interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8941_l22>;
vio-supply = <&pm8941_lvs3>;
pinctrl-names = "default";
pinctrl-0 = <&touch_default_state>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>;
};
rmi4-f12@12 {
reg = <0x12>;
syna,sensor-type = <1>;
/*
* Touchscreen size is 2040x1080, y-values between
* 1920-2040 are used for touchkey (menu, home & back).
* For now clip it off so we don't get touch events
* outside of the display area.
*/
syna,clip-y-high = <1920>;
};
};
};
&blsp1_i2c6 {
status = "okay";
bq24196_charger: charger@6b {
compatible = "ti,bq24196";
reg = <0x6b>;
interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
omit-battery-class;
};
};
&blsp1_uart2 {
status = "okay";
};
&gcc {
compatible = "qcom,gcc-msm8974pro-ac";
};
&pm8941_coincell {
qcom,rset-ohms = <800>;
qcom,vset-millivolts = <3200>;
status = "okay";
};
&pronto {
vddmx-supply = <&pm8841_s1>;
vddcx-supply = <&pm8841_s2>;
vddpx-supply = <&pm8941_s3>;
pinctrl-names = "default";
pinctrl-0 = <&wcnss_pin_a>;
status = "okay";
iris {
vddxo-supply = <&pm8941_l6>;
vddrfa-supply = <&pm8941_l11>;
vddpa-supply = <&pm8941_l19>;
vdddig-supply = <&pm8941_s3>;
};
smd-edge {
qcom,remote-pid = <4>;
label = "pronto";
wcnss {
status = "okay";
};
};
};
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
status = "okay";
};
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
};
pm8841_s2: s2 {
regulator-min-microvolt = <875000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
};
pm8841_s3: s3 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
};
regulators-1 {
compatible = "qcom,rpm-pm8941-regulators";
vdd_l1_l3-supply = <&pm8941_s1>;
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
vdd_l4_l11-supply = <&pm8941_s1>;
vdd_l5_l7-supply = <&pm8941_s2>;
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
vdd_l21-supply = <&vreg_boost>;
pm8941_s1: s1 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
pm8941_s2: s2 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
regulator-boot-on;
};
pm8941_s3: s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-system-load = <154000>;
regulator-always-on;
regulator-boot-on;
regulator-allow-set-load;
};
pm8941_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
regulator-always-on;
regulator-boot-on;
};
pm8941_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8941_l3: l3 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8941_l4: l4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8941_l5: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
pm8941_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
pm8941_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8941_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8941_l11: l11 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1350000>;
};
pm8941_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-allow-set-load;
};
pm8941_l13: l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
pm8941_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l15: l15 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8941_l16: l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
pm8941_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8941_l18: l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8941_l19: l19 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3350000>;
};
pm8941_l20: l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
regulator-boot-on;
};
pm8941_l21: l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
pm8941_l22: l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-allow-set-load;
};
pm8941_l23: l23 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
pm8941_l24: l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
regulator-boot-on;
};
pm8941_lvs3: lvs3 {};
};
};
&sdhc_1 {
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_on>;
pinctrl-1 = <&sdc1_off>;
status = "okay";
};
&tlmm {
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <4>;
bias-disable;
};
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <4>;
bias-pull-up;
};
};
touch_default_state: touch-default-state {
int-pins {
pins = "gpio61";
function = "gpio";
drive-strength = <2>;
bias-disable;
input-enable;
};
reset-pins {
pins = "gpio60";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
wcnss_pin_a: wcnss-pin-active-state {
wlan-pins {
pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
function = "wlan";
drive-strength = <6>;
bias-pull-down;
};
bt-pins {
pins = "gpio35", "gpio43", "gpio44";
function = "bt";
drive-strength = <2>;
bias-pull-down;
};
};
};
&usb {
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
status = "okay";
};
&usb_hs1_phy {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};

83
arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
View File

@@ -7,7 +7,8 @@
/ {
model = "Samsung Galaxy S5";
compatible = "samsung,klte", "qcom,msm8974";
compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "handset";
aliases {
serial0 = &blsp1_uart1;
@@ -375,28 +376,6 @@
status = "okay";
};
&otg {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "okay";
v1p8-supply = <&pma8084_l6>;
v3p3-supply = <&pma8084_l24>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
&pma8084_gpios {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio5";
@@ -470,7 +449,7 @@
};
&rpm_requests {
pma8084-regulators {
regulators-0 {
compatible = "qcom,rpm-pma8084-regulators";
pma8084_s1: s1 {
@@ -706,57 +685,57 @@
&tlmm {
/* This seems suspicious, but somebody with this device should look into it. */
blsp2_uart2_pins_active: blsp2-uart2-pins-active {
blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "blsp_uart8";
drive-strength = <8>;
bias-disable;
};
blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
bt_pins: bt-pins {
hostwake {
bt_pins: bt-pins-state {
hostwake-pins {
pins = "gpio75";
function = "gpio";
drive-strength = <16>;
input-enable;
};
devwake {
devwake-pins {
pins = "gpio91";
function = "gpio";
drive-strength = <2>;
};
};
sdc1_on: sdhc1-on {
clk {
sdc1_on: sdhc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <4>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <4>;
bias-pull-up;
};
};
sdc3_on: sdc3-on {
sdc3_on: sdc3-on-state {
pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
function = "sdc3";
drive-strength = <8>;
bias-disable;
};
sdhc3_cd_pin: sdc3-cd-on {
sdhc3_cd_pin: sdc3-cd-on-state {
pins = "gpio62";
function = "gpio";
@@ -764,52 +743,72 @@
bias-disable;
};
sdc2_on: sdhc2-on {
clk {
sdc2_on: sdhc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <6>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
};
i2c_touchkey_pins: i2c-touchkey {
i2c_touchkey_pins: i2c-touchkey-state {
pins = "gpio95", "gpio96";
function = "gpio";
input-enable;
bias-pull-up;
};
i2c_led_gpioex_pins: i2c-led-gpioex {
i2c_led_gpioex_pins: i2c-led-gpioex-state {
pins = "gpio120", "gpio121";
function = "gpio";
input-enable;
bias-pull-down;
};
gpioex_pin: gpioex {
gpioex_pin: gpioex-state {
pins = "gpio145";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
wifi_pin: wifi {
wifi_pin: wifi-state {
pins = "gpio92";
function = "gpio";
input-enable;
bias-pull-down;
};
panel_te_pin: panel {
panel_te_pin: panel-state {
pins = "gpio12";
function = "mdp_vsync";
drive-strength = <2>;
bias-disable;
};
};
&usb {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
hnp-disable;
srp-disable;
adp-disable;
};
&usb_hs1_phy {
status = "okay";
v1p8-supply = <&pma8084_l6>;
v3p3-supply = <&pma8084_l24>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};

86
arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
View File

@@ -8,7 +8,8 @@
/ {
model = "Sony Xperia Z2 Tablet";
compatible = "sony,xperia-castor", "qcom,msm8974";
compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "tablet";
aliases {
serial0 = &blsp1_uart2;
@@ -212,31 +213,6 @@
};
};
&otg {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
&pm8941_coincell {
status = "okay";
@@ -294,7 +270,7 @@
qcom,power-source = <1>;
rgb-led {
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
@@ -319,7 +295,7 @@
};
&rpm_requests {
pm8941-regulators {
regulators-0 {
compatible = "qcom,rpm-pm8941-regulators";
vdd_l1_l3-supply = <&pm8941_s1>;
@@ -548,41 +524,42 @@
};
&tlmm {
lcd_backlight_en_pin_a: lcd-backlight-vddio {
lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
pins = "gpio69";
function = "gpio";
drive-strength = <10>;
output-low;
bias-disable;
};
sdc1_on: sdc1-on {
clk {
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_on: sdc2-on {
clk {
sdc2_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <6>;
bias-disable;
};
cmd-data {
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
cd {
cd-pins {
pins = "gpio62";
function = "gpio";
drive-strength = <2>;
@@ -590,22 +567,22 @@
};
};
sdc3_on: sdc3-on {
clk {
sdc3_on: sdc3-on-state {
clk-pins {
pins = "gpio40";
function = "sdc3";
drive-strength = <10>;
bias-disable;
};
cmd {
cmd-pins {
pins = "gpio39";
function = "sdc3";
drive-strength = <10>;
bias-pull-up;
};
data {
data-pins {
pins = "gpio35", "gpio36", "gpio37", "gpio38";
function = "sdc3";
drive-strength = <10>;
@@ -613,7 +590,7 @@
};
};
ts_int_pin: ts-int-pin {
ts_int_pin: ts-int-pin-state {
pins = "gpio86";
function = "gpio";
drive-strength = <2>;
@@ -621,7 +598,7 @@
input-enable;
};
bt_host_wake_pin: bt-host-wake {
bt_host_wake_pin: bt-host-wake-state {
pins = "gpio95";
function = "gpio";
drive-strength = <2>;
@@ -629,10 +606,33 @@
output-low;
};
bt_dev_wake_pin: bt-dev-wake {
bt_dev_wake_pin: bt-dev-wake-state {
pins = "gpio96";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
&usb {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
};
&usb_hs1_phy {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};

12
arch/arm/boot/dts/qcom-pm8226.dtsi
View File

@@ -90,6 +90,16 @@
interrupt-controller;
#interrupt-cells = <2>;
};
pm8226_gpios: gpio@c000 {
compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pm8226_gpios 0 0 8>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8226_1: pm8226@1 {
@@ -98,7 +108,7 @@
#address-cells = <1>;
#size-cells = <0>;
pm8226_spmi_regulators: pm8226-regulators {
pm8226_spmi_regulators: regulators {
compatible = "qcom,pm8226-regulators";
};

33
arch/arm/boot/dts/qcom-pm8941.dtsi
View File

@@ -27,7 +27,7 @@
bias-pull-up;
};
usb_id: misc@900 {
usb_id: usb-detect@900 {
compatible = "qcom,pm8941-misc";
reg = <0x900>;
interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
@@ -59,7 +59,7 @@
chg_otg: otg-vbus { };
};
pm8941_gpios: gpios@c000 {
pm8941_gpios: gpio@c000 {
compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
@@ -101,37 +101,44 @@
#size-cells = <0>;
#io-channel-cells = <1>;
bat_temp {
reg = <VADC_LR_MUX1_BAT_THERM>;
adc-chan@6 {
reg = <VADC_VBAT_SNS>;
};
die_temp {
adc-chan@8 {
reg = <VADC_DIE_TEMP>;
};
ref_625mv {
adc-chan@9 {
reg = <VADC_REF_625MV>;
};
ref_1250v {
adc-chan@a {
reg = <VADC_REF_1250MV>;
};
ref_gnd {
adc-chan@e {
reg = <VADC_GND_REF>;
};
ref_vdd {
adc-chan@f {
reg = <VADC_VDD_VADC>;
};
vbat_sns {
reg = <VADC_VBAT_SNS>;
adc-chan@30 {
reg = <VADC_LR_MUX1_BAT_THERM>;
};
};
pm8941_iadc: iadc@3600 {
pm8941_iadc: adc@3600 {
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
reg = <0x3600>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
};
pm8941_coincell: coincell@2800 {
pm8941_coincell: charger@2800 {
compatible = "qcom,pm8941-coincell";
reg = <0x2800>;
status = "disabled";

19
arch/arm/boot/dts/qcom-pma8084.dtsi
View File

@@ -27,7 +27,7 @@
bias-pull-up;
};
pma8084_gpios: gpios@c000 {
pma8084_gpios: gpio@c000 {
compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
@@ -64,22 +64,27 @@
#size-cells = <0>;
#io-channel-cells = <1>;
die_temp {
adc-chan@8 {
reg = <VADC_DIE_TEMP>;
};
ref_625mv {
adc-chan@9 {
reg = <VADC_REF_625MV>;
};
ref_1250v {
adc-chan@a {
reg = <VADC_REF_1250MV>;
};
ref_buf_625mv {
adc-chan@c {
reg = <VADC_SPARE1>;
};
ref_gnd {
adc-chan@e {
reg = <VADC_GND_REF>;
};
ref_vdd {
adc-chan@f {
reg = <VADC_VDD_VADC>;
};
};

2
arch/arm/boot/dts/qcom-pmx65.dtsi
View File

@@ -20,7 +20,7 @@
#thermal-sensor-cells = <0>;
};
pmx65_gpios: pinctrl@8800 {
pmx65_gpios: gpio@8800 {
compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;

45
arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
View File

@@ -282,40 +282,25 @@
};
&tlmm {
pcie_ep_clkreq_default: pcie_ep_clkreq_default {
mux {
pins = "gpio56";
function = "pcie_clkreq";
};
config {
pins = "gpio56";
drive-strength = <2>;
bias-disable;
};
pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
pins = "gpio56";
function = "pcie_clkreq";
drive-strength = <2>;
bias-disable;
};
pcie_ep_perst_default: pcie_ep_perst_default {
mux {
pins = "gpio57";
function = "gpio";
};
config {
pins = "gpio57";
drive-strength = <2>;
bias-pull-down;
};
pcie_ep_perst_default: pcie-ep-perst-default-state {
pins = "gpio57";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
pcie_ep_wake_default: pcie_ep_wake_default {
mux {
pins = "gpio53";
function = "gpio";
};
config {
pins = "gpio53";
drive-strength = <2>;
bias-disable;
};
pcie_ep_wake_default: pcie-ep-wake-default-state {
pins = "gpio53";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};

1
arch/arm/boot/dts/qcom-sdx55.dtsi
View File

@@ -559,6 +559,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 109>;
};
sram@1468f000 {

4
arch/arm/boot/dts/qcom-sdx65.dtsi
View File

@@ -441,8 +441,8 @@
interrupt-controller;
};
imem@1468f000 {
compatible = "simple-mfd";
sram@1468f000 {
compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
reg = <0x1468f000 0x1000>;
ranges = <0x0 0x1468f000 0x1000>;
#address-cells = <1>;