ice: Add documentation for devlink-rate implementation

Add documentation to a newly added devlink-rate feature. Provide some
examples on how to use the commands, which netlink attributes are
supported and descriptions of the attributes.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/networking/devlink/ice.rst

@@ -254,3 +254,118 @@ Users can request an immediate capture of a snapshot via the
     0000000000000210 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 
     $ devlink region delete pci/0000:01:00.0/device-caps snapshot 1
+
+Devlink Rate
+============
+
+The ``ice`` driver implements devlink-rate API. It allows for offload of
+the Hierarchical QoS to the hardware. It enables user to group Virtual
+Functions in a tree structure and assign supported parameters: tx_share,
+tx_max, tx_priority and tx_weight to each node in a tree. So effectively
+user gains an ability to control how much bandwidth is allocated for each
+VF group. This is later enforced by the HW.
+
+It is assumed that this feature is mutually exclusive with DCB performed
+in FW and ADQ, or any driver feature that would trigger changes in QoS,
+for example creation of the new traffic class. The driver will prevent DCB
+or ADQ configuration if user started making any changes to the nodes using
+devlink-rate API. To configure those features a driver reload is necessary.
+Correspondingly if ADQ or DCB will get configured the driver won't export
+hierarchy at all, or will remove the untouched hierarchy if those
+features are enabled after the hierarchy is exported, but before any
+changes are made.
+
+This feature is also dependent on switchdev being enabled in the system.
+It's required bacause devlink-rate requires devlink-port objects to be
+present, and those objects are only created in switchdev mode.
+
+If the driver is set to the switchdev mode, it will export internal
+hierarchy the moment VF's are created. Root of the tree is always
+represented by the node_0. This node can't be deleted by the user. Leaf
+nodes and nodes with children also can't be deleted.
+
+.. list-table:: Attributes supported
+    :widths: 15 85
+
+    * - Name
+      - Description
+    * - ``tx_max``
+      - maximum bandwidth to be consumed by the tree Node. Rate Limit is
+        an absolute number specifying a maximum amount of bytes a Node may
+        consume during the course of one second. Rate limit guarantees
+        that a link will not oversaturate the receiver on the remote end
+        and also enforces an SLA between the subscriber and network
+        provider.
+    * - ``tx_share``
+      - minimum bandwidth allocated to a tree node when it is not blocked.
+        It specifies an absolute BW. While tx_max defines the maximum
+        bandwidth the node may consume, the tx_share marks committed BW
+        for the Node.
+    * - ``tx_priority``
+      - allows for usage of strict priority arbiter among siblings. This
+        arbitration scheme attempts to schedule nodes based on their
+        priority as long as the nodes remain within their bandwidth limit.
+        Range 0-7. Nodes with priority 7 have the highest priority and are
+        selected first, while nodes with priority 0 have the lowest
+        priority. Nodes that have the same priority are treated equally.
+    * - ``tx_weight``
+      - allows for usage of Weighted Fair Queuing arbitration scheme among
+        siblings. This arbitration scheme can be used simultaneously with
+        the strict priority. Range 1-200. Only relative values mater for
+        arbitration.
+
+``tx_priority`` and ``tx_weight`` can be used simultaneously. In that case
+nodes with the same priority form a WFQ subgroup in the sibling group
+and arbitration among them is based on assigned weights.
+
+.. code:: shell
+
+    # enable switchdev
+    $ devlink dev eswitch set pci/0000:4b:00.0 mode switchdev
+
+    # at this point driver should export internal hierarchy
+    $ echo 2 > /sys/class/net/ens785np0/device/sriov_numvfs
+
+    $ devlink port function rate show
+    pci/0000:4b:00.0/node_25: type node parent node_24
+    pci/0000:4b:00.0/node_24: type node parent node_0
+    pci/0000:4b:00.0/node_32: type node parent node_31
+    pci/0000:4b:00.0/node_31: type node parent node_30
+    pci/0000:4b:00.0/node_30: type node parent node_16
+    pci/0000:4b:00.0/node_19: type node parent node_18
+    pci/0000:4b:00.0/node_18: type node parent node_17
+    pci/0000:4b:00.0/node_17: type node parent node_16
+    pci/0000:4b:00.0/node_14: type node parent node_5
+    pci/0000:4b:00.0/node_5: type node parent node_3
+    pci/0000:4b:00.0/node_13: type node parent node_4
+    pci/0000:4b:00.0/node_12: type node parent node_4
+    pci/0000:4b:00.0/node_11: type node parent node_4
+    pci/0000:4b:00.0/node_10: type node parent node_4
+    pci/0000:4b:00.0/node_9: type node parent node_4
+    pci/0000:4b:00.0/node_8: type node parent node_4
+    pci/0000:4b:00.0/node_7: type node parent node_4
+    pci/0000:4b:00.0/node_6: type node parent node_4
+    pci/0000:4b:00.0/node_4: type node parent node_3
+    pci/0000:4b:00.0/node_3: type node parent node_16
+    pci/0000:4b:00.0/node_16: type node parent node_15
+    pci/0000:4b:00.0/node_15: type node parent node_0
+    pci/0000:4b:00.0/node_2: type node parent node_1
+    pci/0000:4b:00.0/node_1: type node parent node_0
+    pci/0000:4b:00.0/node_0: type node
+    pci/0000:4b:00.0/1: type leaf parent node_25
+    pci/0000:4b:00.0/2: type leaf parent node_25
+
+    # let's create some custom node
+    $ devlink port function rate add pci/0000:4b:00.0/node_custom parent node_0
+
+    # second custom node
+    $ devlink port function rate add pci/0000:4b:00.0/node_custom_1 parent node_custom
+
+    # reassign second VF to newly created branch
+    $ devlink port function rate set pci/0000:4b:00.0/2 parent node_custom_1
+
+    # assign tx_weight to the VF
+    $ devlink port function rate set pci/0000:4b:00.0/2 tx_weight 5
+
+    # assign tx_share to the VF
+    $ devlink port function rate set pci/0000:4b:00.0/2 tx_share 500Mbps