Files
linux_media/sound/soc/sof/intel/hda-loader.c
Bard liao ceca2197b2 ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP
We will reinit DSP in a loop when it fails to initialize the first
time, as recommended. So, it is not an error before we finally give
up. And reorder the trace to make it more readable.

Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-13 15:12:22 +00:00

403 lines
10 KiB
C

// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license. When using or
// redistributing this file, you may do so under either license.
//
// Copyright(c) 2018 Intel Corporation. All rights reserved.
//
// Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com>
// Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
// Rander Wang <rander.wang@intel.com>
// Keyon Jie <yang.jie@linux.intel.com>
//
/*
* Hardware interface for HDA DSP code loader
*/
#include <linux/firmware.h>
#include <sound/hdaudio_ext.h>
#include <sound/sof.h>
#include "../ops.h"
#include "hda.h"
#define HDA_FW_BOOT_ATTEMPTS 3
static int cl_stream_prepare(struct snd_sof_dev *sdev, unsigned int format,
unsigned int size, struct snd_dma_buffer *dmab,
int direction)
{
struct hdac_ext_stream *dsp_stream;
struct hdac_stream *hstream;
struct pci_dev *pci = to_pci_dev(sdev->dev);
int ret;
if (direction != SNDRV_PCM_STREAM_PLAYBACK) {
dev_err(sdev->dev, "error: code loading DMA is playback only\n");
return -EINVAL;
}
dsp_stream = hda_dsp_stream_get(sdev, direction);
if (!dsp_stream) {
dev_err(sdev->dev, "error: no stream available\n");
return -ENODEV;
}
hstream = &dsp_stream->hstream;
hstream->substream = NULL;
/* allocate DMA buffer */
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab);
if (ret < 0) {
dev_err(sdev->dev, "error: memory alloc failed: %x\n", ret);
goto error;
}
hstream->period_bytes = 0;/* initialize period_bytes */
hstream->format_val = format;
hstream->bufsize = size;
ret = hda_dsp_stream_hw_params(sdev, dsp_stream, dmab, NULL);
if (ret < 0) {
dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret);
goto error;
}
hda_dsp_stream_spib_config(sdev, dsp_stream, HDA_DSP_SPIB_ENABLE, size);
return hstream->stream_tag;
error:
hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
snd_dma_free_pages(dmab);
return ret;
}
/*
* first boot sequence has some extra steps. core 0 waits for power
* status on core 1, so power up core 1 also momentarily, keep it in
* reset/stall and then turn it off
*/
static int cl_dsp_init(struct snd_sof_dev *sdev, const void *fwdata,
u32 fwsize, int stream_tag)
{
struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
const struct sof_intel_dsp_desc *chip = hda->desc;
unsigned int status;
int ret;
int i;
/* step 1: power up corex */
ret = hda_dsp_core_power_up(sdev, chip->cores_mask);
if (ret < 0) {
dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n");
goto err;
}
/* DSP is powered up, set all SSPs to slave mode */
for (i = 0; i < chip->ssp_count; i++) {
snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
chip->ssp_base_offset
+ i * SSP_DEV_MEM_SIZE
+ SSP_SSC1_OFFSET,
SSP_SET_SLAVE,
SSP_SET_SLAVE);
}
/* step 2: purge FW request */
snd_sof_dsp_write(sdev, HDA_DSP_BAR, chip->ipc_req,
chip->ipc_req_mask | (HDA_DSP_IPC_PURGE_FW |
((stream_tag - 1) << 9)));
/* step 3: unset core 0 reset state & unstall/run core 0 */
ret = hda_dsp_core_run(sdev, HDA_DSP_CORE_MASK(0));
if (ret < 0) {
dev_err(sdev->dev, "error: dsp core start failed %d\n", ret);
ret = -EIO;
goto err;
}
/* step 4: wait for IPC DONE bit from ROM */
ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
chip->ipc_ack, status,
((status & chip->ipc_ack_mask)
== chip->ipc_ack_mask),
HDA_DSP_REG_POLL_INTERVAL_US,
HDA_DSP_INIT_TIMEOUT_US);
if (ret < 0) {
dev_err(sdev->dev, "error: %s: timeout for HIPCIE done\n",
__func__);
goto err;
}
/* step 5: power down corex */
ret = hda_dsp_core_power_down(sdev,
chip->cores_mask & ~(HDA_DSP_CORE_MASK(0)));
if (ret < 0) {
dev_err(sdev->dev, "error: dsp core x power down failed\n");
goto err;
}
/* step 6: enable IPC interrupts */
hda_dsp_ipc_int_enable(sdev);
/* step 7: wait for ROM init */
ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
HDA_DSP_SRAM_REG_ROM_STATUS, status,
((status & HDA_DSP_ROM_STS_MASK)
== HDA_DSP_ROM_INIT),
HDA_DSP_REG_POLL_INTERVAL_US,
chip->rom_init_timeout *
USEC_PER_MSEC);
if (!ret)
return 0;
dev_err(sdev->dev,
"error: %s: timeout HDA_DSP_SRAM_REG_ROM_STATUS read\n",
__func__);
err:
hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
hda_dsp_core_reset_power_down(sdev, chip->cores_mask);
return ret;
}
static int cl_trigger(struct snd_sof_dev *sdev,
struct hdac_ext_stream *stream, int cmd)
{
struct hdac_stream *hstream = &stream->hstream;
int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
/* code loader is special case that reuses stream ops */
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
wait_event_timeout(sdev->waitq, !sdev->code_loading,
HDA_DSP_CL_TRIGGER_TIMEOUT);
snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL,
1 << hstream->index,
1 << hstream->index);
snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
sd_offset,
SOF_HDA_SD_CTL_DMA_START |
SOF_HDA_CL_DMA_SD_INT_MASK,
SOF_HDA_SD_CTL_DMA_START |
SOF_HDA_CL_DMA_SD_INT_MASK);
hstream->running = true;
return 0;
default:
return hda_dsp_stream_trigger(sdev, stream, cmd);
}
}
static struct hdac_ext_stream *get_stream_with_tag(struct snd_sof_dev *sdev,
int tag)
{
struct hdac_bus *bus = sof_to_bus(sdev);
struct hdac_stream *s;
/* get stream with tag */
list_for_each_entry(s, &bus->stream_list, list) {
if (s->direction == SNDRV_PCM_STREAM_PLAYBACK &&
s->stream_tag == tag) {
return stream_to_hdac_ext_stream(s);
}
}
return NULL;
}
static int cl_cleanup(struct snd_sof_dev *sdev, struct snd_dma_buffer *dmab,
struct hdac_ext_stream *stream)
{
struct hdac_stream *hstream = &stream->hstream;
int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
int ret;
ret = hda_dsp_stream_spib_config(sdev, stream, HDA_DSP_SPIB_DISABLE, 0);
hda_dsp_stream_put(sdev, SNDRV_PCM_STREAM_PLAYBACK,
hstream->stream_tag);
hstream->running = 0;
hstream->substream = NULL;
/* reset BDL address */
snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL, 0);
snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0);
snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset, 0);
snd_dma_free_pages(dmab);
dmab->area = NULL;
hstream->bufsize = 0;
hstream->format_val = 0;
return ret;
}
static int cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *stream)
{
unsigned int reg;
int ret, status;
ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_START);
if (ret < 0) {
dev_err(sdev->dev, "error: DMA trigger start failed\n");
return ret;
}
status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
HDA_DSP_SRAM_REG_ROM_STATUS, reg,
((reg & HDA_DSP_ROM_STS_MASK)
== HDA_DSP_ROM_FW_ENTERED),
HDA_DSP_REG_POLL_INTERVAL_US,
HDA_DSP_BASEFW_TIMEOUT_US);
/*
* even in case of errors we still need to stop the DMAs,
* but we return the initial error should the DMA stop also fail
*/
if (status < 0) {
dev_err(sdev->dev,
"error: %s: timeout HDA_DSP_SRAM_REG_ROM_STATUS read\n",
__func__);
}
ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_STOP);
if (ret < 0) {
dev_err(sdev->dev, "error: DMA trigger stop failed\n");
if (!status)
status = ret;
}
return status;
}
int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
{
struct snd_sof_pdata *plat_data = sdev->pdata;
const struct sof_dev_desc *desc = plat_data->desc;
const struct sof_intel_dsp_desc *chip_info;
struct hdac_ext_stream *stream;
struct firmware stripped_firmware;
int ret, ret1, tag, i;
chip_info = desc->chip_info;
stripped_firmware.data = plat_data->fw->data;
stripped_firmware.size = plat_data->fw->size;
/* init for booting wait */
init_waitqueue_head(&sdev->boot_wait);
sdev->boot_complete = false;
/* prepare DMA for code loader stream */
tag = cl_stream_prepare(sdev, 0x40, stripped_firmware.size,
&sdev->dmab, SNDRV_PCM_STREAM_PLAYBACK);
if (tag < 0) {
dev_err(sdev->dev, "error: dma prepare for fw loading err: %x\n",
tag);
return tag;
}
/* get stream with tag */
stream = get_stream_with_tag(sdev, tag);
if (!stream) {
dev_err(sdev->dev,
"error: could not get stream with stream tag %d\n",
tag);
ret = -ENODEV;
goto err;
}
memcpy(sdev->dmab.area, stripped_firmware.data,
stripped_firmware.size);
/* try ROM init a few times before giving up */
for (i = 0; i < HDA_FW_BOOT_ATTEMPTS; i++) {
ret = cl_dsp_init(sdev, stripped_firmware.data,
stripped_firmware.size, tag);
/* don't retry anymore if successful */
if (!ret)
break;
dev_dbg(sdev->dev, "iteration %d of Core En/ROM load failed: %d\n",
i, ret);
dev_dbg(sdev->dev, "Error code=0x%x: FW status=0x%x\n",
snd_sof_dsp_read(sdev, HDA_DSP_BAR,
HDA_DSP_SRAM_REG_ROM_ERROR),
snd_sof_dsp_read(sdev, HDA_DSP_BAR,
HDA_DSP_SRAM_REG_ROM_STATUS));
}
if (i == HDA_FW_BOOT_ATTEMPTS) {
dev_err(sdev->dev, "error: dsp init failed after %d attempts with err: %d\n",
i, ret);
goto cleanup;
}
/*
* at this point DSP ROM has been initialized and
* should be ready for code loading and firmware boot
*/
ret = cl_copy_fw(sdev, stream);
if (!ret)
dev_dbg(sdev->dev, "Firmware download successful, booting...\n");
else
dev_err(sdev->dev, "error: load fw failed ret: %d\n", ret);
cleanup:
/*
* Perform codeloader stream cleanup.
* This should be done even if firmware loading fails.
* If the cleanup also fails, we return the initial error
*/
ret1 = cl_cleanup(sdev, &sdev->dmab, stream);
if (ret1 < 0) {
dev_err(sdev->dev, "error: Code loader DSP cleanup failed\n");
/* set return value to indicate cleanup failure */
if (!ret)
ret = ret1;
}
/*
* return master core id if both fw copy
* and stream clean up are successful
*/
if (!ret)
return chip_info->init_core_mask;
/* dump dsp registers and disable DSP upon error */
err:
hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
/* disable DSP */
snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR,
SOF_HDA_REG_PP_PPCTL,
SOF_HDA_PPCTL_GPROCEN, 0);
return ret;
}
/* pre fw run operations */
int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev)
{
/* disable clock gating and power gating */
return hda_dsp_ctrl_clock_power_gating(sdev, false);
}
/* post fw run operations */
int hda_dsp_post_fw_run(struct snd_sof_dev *sdev)
{
/* re-enable clock gating and power gating */
return hda_dsp_ctrl_clock_power_gating(sdev, true);
}