Pull irqchip updates from Marc Zyngier
- New driver for the MIPS-based Realtek RTL838x/RTL839x SoC
- Conversion of the sun6i-r support code to a hierarchical setup
- Fix wake-up interrupts for the ls-extirq driver
- Fix MSI allocation for the loongson-pch-msi driver
- Add compatible strings for new Qualcomm SoCs
- Tidy up a few Kconfig entries (IMX, CSKY)
- Spelling phyksiz
- Remove the sirfsoc and tango drivers
Link: https://lore.kernel.org/r/20210214124015.3333457-1-maz@kernel.org
Update the example as well. Add the '#pwm-cells' and 'clocks' properties
for a complete working example.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Some supported chips (e.g. pca9505) support 40 lines. To be able to give
each line a name the length of the gpio-line-names property must be
allowed to contain up to 40 entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Document the compatible value for the GPIO block in the Renesas R-Car
V3U (R8A779A0) SoC.
While this GPIO block is mostly compatible with GPIO blocks on R-Car
Gen3 SoCs, there are small differences, and one of the new registers
needs to be configured differently from its initial reset state.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add compatible string for AM64 SoC in device tree binding of davinci GPIO
modules as the same IP is used.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Currently the HTML output for Documentation/driver-api/gpio/intro.rst
doesn't look right. The lines that start with LOW or HIGH are formatted
in bold, while the next line after each is not bold.
With this patch, the HTML looks better.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The gpiod_*_array_* functions take four arguments, not three.
Additionally, the formatting of the "value_bitmap" line results in
misformatted HTML, so fix that.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
If the no_hash_pointers command line parameter is set, then
printk("%p") will print pointers as unhashed, which is useful for
debugging purposes. This change applies to any function that uses
vsprintf, such as print_hex_dump() and seq_buf_printf().
A large warning message is displayed if this option is enabled.
Unhashed pointers expose kernel addresses, which can be a security
risk.
Also update test_printf to skip the hashed pointer tests if the
command-line option is set.
Signed-off-by: Timur Tabi <timur@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210214161348.369023-4-timur@kernel.org
Add devicetree YAML binding for SDX55 APCS GCC block. The APCS block
acts as the mailbox controller and also provides a clock output and
takes 3 clock sources (pll, aux, ref) as input.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Update the existing OMAP Mailbox binding to include the info for
AM64x SoCs. There are some minor IP integration differences between
the AM64x SoCs and the previous AM65x and J721E SoC families.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Pull cgroup fixes from Tejun Heo:
"Two cgroup fixes:
- fix a NULL deref when trying to poll PSI in the root cgroup
- fix confusing controller parsing corner case when mounting cgroup
v1 hierarchies
And doc / maintainer file updates"
* 'for-5.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: update PSI file description in docs
cgroup: fix psi monitor for root cgroup
MAINTAINERS: Update my email address
MAINTAINERS: Remove stale URLs for cpuset
cgroup-v1: add disabled controller check in cgroup1_parse_param()
Document the new xlnx,switch-x-sgmii attribute which is used to indicate
that the Ethernet core supports dynamic switching between 1000BaseX and
SGMII.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BCM4908 uses fixed partitions layout but function of some partitions may
vary. Some devices use multiple firmware partitions and those partitions
should be marked to let system discover their purpose.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Richard Weinberger <richard@nod.at>
Single partition binding is quite common and may be:
1. Used by multiple parsers
2. Extended for more specific cases
Move it to separated file to avoid code duplication.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
KVM/arm64 fixes for 5.11, take #2
- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Devices offering SMBus block process calls are rare, so add it to the
testunit. This is also a good test case for testing proper
I2C_M_RECV_LEN flag handling of I2C bus masters emulating SMBus.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
J721e, J7200 and AM64 have multi port switches which can work in multi
mac mode and in switch mode. Add documentation explaining how to use
different modes.
Borrowed from:
Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AM65 NUSS ethernet switch on K3 devices can be configured to work either
in independent mac mode where each port acts as independent network
interface (multi mac) or switch mode.
Add devlink hooks to provide a way to switch b/w these modes.
Rationale to use devlink instead of defaulting to bridge mode is that
SoC use cases require to support multiple independent MAC ports with no
switching so that users can use software bridges with multi-mac
configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching
between multi mac and switch mode requires significant Port and ALE
reconfiguration, therefore is easier to be made as part of mode change
devlink hooks. It also allows to keep user interface similar to what
was implemented for the previous generation of TI CPSW IP
(on AM33/AM43/AM57 SoCs).
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It should be /included/ by every Ethernet controller binding. It adds
support for various generic properties.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
