Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230621085715.5382-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a small patch set to change the UMP core for the upcoming
gadget driver support. Basically exporting a couple of helper
functions and adding a flag to suppress the internal UMP handling.
No functional changes by those alone.
Link: https://lore.kernel.org/r/20230621110241.4751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is another preliminary patch for USB MIDI 2.0 gadget driver.
Export the currently local snd_ump_receive_ump_val(). It can be used
by the gadget driver for processing the UMP data.
Link: https://lore.kernel.org/r/20230621110241.4751-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For gapless playback it is possible that each track can have different
codec profile with same decoder, for example we have WMA album,
we may have different tracks as WMA v9, WMA v10 and so on
Or if DSP's like QDSP have abililty to switch decoders on single stream
for each track, then this call could be used to set new codec parameters.
Existing code does not allow to change this profile while doing gapless
playback.
Reuse existing SNDRV_COMPRESS_SET_PARAMS to set this new track params along
some additional checks to enforce proper state machine.
With this new changes now the user can call SNDRV_COMPRESS_SET_PARAMS
anytime after setting next track and additional check in write should
also ensure that params are set before writing new data.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230619092805.21649-1-srinivas.kandagatla@linaro.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series add support for
- Platform device creation for SoundWire Manager instances and
PDM controller.
- SoundWire DMA driver.
- Interrupt handling for SoundWire manager related interrupts,
SoundWire DMA interrupts and ACP error interrupts.
- ACP PCI driver PM ops modification with respect to SoundWire
Power modes.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current soc-core.c has snd_soc_{of_}get_dai_name() to get DAI name
for dlc (snd_soc_dai_link_component). It gets .dai_name, but we need
.of_node too. Therefor user need to arrange.
It will be more useful if it gets both .dai_name and .of_node.
This patch adds snd_soc_{of_}get_dlc() for it, and convert to use it.
AMD SoundWire manager supports different power modes.
acp_reset flag will be set to false only when SoundWire manager power
mode is selected as ClockStop Mode. For rest of the combinations
(ACP PDM + SDW), acp_reset flag will be set to true.
When acp_reset flag is set, acp de-init and acp init sequence should
be invoked during suspend/resume callbacks.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230612095903.2113464-10-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on ACP pin configuration and scanning child devices
under ACP pci device ACPI scope, platform device configuration
(pdev_config) and platform device count(pdev_count) will be
calculated.
Using pdev_config and pdev_count values, ACP PCI driver will
create platform devices for Pink Sardine platform.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230612095903.2113464-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds compressed offload support to Qualcomm audioreach drivers.
Currently it supports AAC, MP3 and FALC along with gapless.
Tested this on SM8450 and sc7280.
Merge series from Mark Brown <broonie@kernel.org>:
Several of the Everest Semi CODECs only support single register read and
write operations and therefore do not benefit from using the rbtree
cache over the maple tree cache, convert them to the more modern maple
tree cache.
Merge series from Mark Brown <broonie@kernel.org>:
Many of the Realtek I2C/SPI devices only support single register read
and write operations so don't benefit from using the rbtree cache
instead of the more modern maple tree cache, convert them to maple tree.
Current soc-core.c has snd_soc_{of_}get_dai_name() to get DAI name
for dlc (snd_soc_dai_link_component). It gets .dai_name, but we need
.of_node too. Therefor user need to arrange.
It will be more useful if it gets both .dai_name and .of_node.
This patch adds snd_soc_{of_}get_dlc() for it, and existing functions
uses it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0q6dgnm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For proper DMA operation addr_width must corresponds with audio format
(S16, S24, S32, etc). Proper bus width calculations is performed by
snd_hwparams_to_dma_slave_config(). So drop wrong addr_width asignment
for dt configs and let snd_hwparams_to_dma_slave_config() do the job.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230613191552.724748-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G634Z series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230619060320.1336455-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The acpi_node_get_property_reference() function returns kernel error
codes and not ACPI error codes. So, although it does not affect the
compiled code, using the ACPI_FAILURE() macro is wrong. Secondly,
if the is_acpi_device_node() function returns false, then we should
return -ENOENT instead of returning success.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/fb14815d-2f9a-4b42-b193-cec61e7417ca@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
