For proper DMA operation addr_width must corresponds with audio format
(S16, S24, S32, etc). Proper bus width calculations is performed by
snd_hwparams_to_dma_slave_config(). So drop wrong addr_width asignment
for dt configs and let snd_hwparams_to_dma_slave_config() do the job.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230613191552.724748-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The COMP1_TX_WORDSIZE_0/COMP2_RX_WORDSIZE_0 fields in the comp
registers indicate the maximum wordsize supported. DWC I2S controller
can operate with any smaller wordsize. So extend the formats to let
I2S to operate in any allowed modes.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru
Link: https://lore.kernel.org/r/20230505053521.18233-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-63-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull sound updates from Takashi Iwai:
"As the diffstat scatters over the tree, we've got many tree-wide small
changes, but also got quite a few intrusive changes in the core side.
The only ABI-visible core change is the new rawmidi framing mode
support while others are kernel-internal, mostly code refactoring
and/or nice improvements.
Here are some highlights:
Core:
- A new framing access mode for rawmidi to get timestamps
- Cleanup / refactoring of buffer memory management helper code
- Support for automatic negotiation of ASoC DAI formats
- Revival of software suspend for PCM and control core, as a
preliminary work for PCI BAR rescan support
ASoC:
- Accessory detection support for several Qualcomm parts
- Support for IEC958 control with hdmi-codec
- Merging of Tegra machine drivers into a single driver
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
USB-audio:
- Reduction of latency at playback start
- Code cleanup / fixes of usx2y driver
- Scarlett2 mixer code fixes and enhancements
- Quirks for Ozone and Denon devices
HD-audio:
- A few quirks for HP and ASUS machines
- Display power management fixes
Others:
- FireWire code refactoring and enhancements
- Tree-wide trivial coding-style fixes"
* tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
ALSA: usb-audio: scarlett2: Fix for loop increment in scarlett2_usb_get_config
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
ALSA: hda/realtek - Add ALC285 HP init procedure
ALSA: hda/realtek - Add type for ALC287
ALSA: scarlett2: Fix scarlett2_*_ctl_put() return values again
ALSA: scarlett2: Fix pad count for 18i8 Gen 3
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
ALSA: hda: Release codec display power during shutdown/reboot
ALSA: hda: Release controller display power during shutdown/reboot
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
ASoC: fsl: remove unnecessary oom message
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tegra30: ahub: Use devm_platform_get_and_ioremap_resource()
ASoC: tegra: tegra210_admaif: Use devm_platform_get_and_ioremap_resource()
...
This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
while CONFIG_SND_DESIGNWARE_PCM is not set, building with W=1 shows this:
sound/soc/dwc/local.h:127:6: warning: no previous prototype for ‘dw_pcm_push_tx’ [-Wmissing-prototypes]
void dw_pcm_push_tx(struct dw_i2s_dev *dev) { }
^~~~~~~~~~~~~~
sound/soc/dwc/local.h:128:6: warning: no previous prototype for ‘dw_pcm_pop_rx’ [-Wmissing-prototypes]
void dw_pcm_pop_rx(struct dw_i2s_dev *dev) { }
^~~~~~~~~~~~~
sound/soc/dwc/local.h:129:5: warning: no previous prototype for ‘dw_pcm_register’ [-Wmissing-prototypes]
int dw_pcm_register(struct platform_device *pdev)
^~~~~~~~~~~~~~~
Change these to inline functions to fix the warnings.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210329150524.18184-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2u3x7iy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the drivers with the new managed buffer allocation API.
The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped, as well as the superfluous
snd_pcm_lib_preallocate_free_for_all() call. As of the result,
hw_free and pcm_destruct ops became empty and got removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191210142614.19405-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent change (commit 08422d2c55: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_pcm_lib_preallocate_pages() and co always succeed, so the error
check is simply redundant. Drop it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we have same register to tell capture and playback capability
of a device and we want separate cpu dais for playback and
capture. Then, DW_I2S_QUIRK_COMP_PARAM1 is used to enable one
capability per dai.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This structure is only stored in the ops field of a snd_soc_dai_driver
structure. That field is declared const, so snd_soc_dai_ops structures
that have this property can be declared as const also.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Added quirk DW_I2S_QUIRK_16BIT_IDX_OVERRIDE to Designware
driver. This quirk will set idx value to 1.
By setting this quirk, it will override supported format
as 16 bit resolution and bus width as 2 Bytes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Designware PCM is an extension to Designware I2S and they are dependent
on each other. For this reason, make Designware PCM a boolean which will
compile with Desigwnare I2S module. The name of the module is not changed
but the name of the files need to be changed.
Also, without this commit we get errors when probbing designware_i2s module
because of unspecified license:
designware_pcm: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
designware_pcm: Unknown symbol __rcu_read_lock (err 0)
designware_pcm: Unknown symbol devm_snd_soc_register_platform (err 0)
designware_pcm: Unknown symbol synchronize_rcu (err 0)
designware_pcm: Unknown symbol __rcu_read_unlock (err 0)
designware_pcm: Unknown symbol snd_soc_set_runtime_hwparams (err 0)
So, this is really needed as a fix.
Fixes: 79361b2b98 ("ASoC: dwc: Add PIO PCM extension")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sample size of 24 bits use in reality 32 bits for storage. We
can safelly enable this sample size and treat the data as
32 bits.
Tested in a x86_64 platform and in ARC AXS101 SDP platform.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Up until now PIO mode offered only playback support. With
this patch we add support for record mode. The PCM was
refactored so that we could reuse the existing infrastructure
without many changes.
We have support for 16 and 32 bits of sample size using
only 2 channels.
Tested in a x86_64 platform and in ARC AXS101 SDP platform.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We can no longer rely on the return value of
devm_snd_dmaengine_pcm_register(...) to check if the DMA
handle is declared in the DT.
Previously this check activated PIO mode but currently
dma_request_chan returns either a valid channel or -EPROBE_DEFER.
In order to activate PIO mode check instead if the interrupt
line is declared. This reflects better what is documented in
the DT bindings (see Documentation/devicetree/bindings/sound/
designware-i2s.txt).
Also, initialize use_pio variable which was never being set
causing PIO mode to never work.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dw_configure_dai_by_dt() function and further dev->{play,capture}
_dma_data.dt data structures seem to be used in this driver only in case
of a system using devicetree, thus chan_name assignments have no effect
since they will be ignored in dmaengine_pcm_request_chan_of() call and
will be substituted with values taken form dmaengine_pcm_dma_channel_names[]
table ("tx", "rx").
Also there is no any "TX", "RX" dma-names entries in arch/arm/boot/dts,
only lower case "tx", "rx" seem to be used.
Lastly, this driver doesn't set SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME
flag when registering a dmaengine PCM to indicate the chan_name should be
used.
My intention is to eventually remove the struct snd_dmaengine_dai_dma_data
chan_name field as there is also a chan_names[] field in struct
snd_dmaengine_pcm_config which can be used for same purpose.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The new PIO mode for the dwc audio driver causes a link failure
when it is built as a loadable module but the audio driver is built-in:
sound/built-in.o: In function `i2s_irq_handler':
:(.text+0x58c64): undefined reference to `dw_pcm_push_tx'
sound/built-in.o: In function `dw_i2s_probe':
:(.text+0x593dc): undefined reference to `dw_pcm_register'
We could link both into a single module, but apparently the
author intended them to be separate, so this instead changes
the Makefile to force the pcm module to be built-in if the
base module is. This is a bit hacky but not as bad as trying
to work around it in Kconfig language.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 79361b2b98 ("ASoC: dwc: Add PIO PCM extension")
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch makes Designware I2S driver use the fifo
depth value to program the fifo configuration register
instead of using hardcoded values.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to unmask all interrupts at I2S start. This
can cause performance issues in slower platforms.
Unmask only the interrupts for the used channels.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case that the driver is configured from device-tree
i2s_reg_comp1 and i2s_reg_comp2 aren't initialised, breaking the driver.
Fix this by unconditionally setting these values before checking for quirks.
Fixes: a242cac1d3 ("ASoC: dwc: add quirk to override COMP_PARAM_1 register")
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
