In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring
to init priv->rings and bound &ring->work with p9_xen_response.
When it calls xen_9pfs_front_event_handler to handle IRQ requests,
it will finally call schedule_work to start the work.
When we call xen_9pfs_front_remove to remove the driver, there
may be a sequence as follows:
Fix it by finishing the work before cleanup in xen_9pfs_front_free.
Note that, this bug is found by static analysis, which might be
false positive.
CPU0 CPU1
|p9_xen_response
xen_9pfs_front_remove|
xen_9pfs_front_free|
kfree(priv) |
//free priv |
|p9_tag_lookup
|//use priv->client
Fixes: 71ebd71921 ("xen/9pfs: connect to the backend")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Pull 9p updates from Eric Van Hensbergen:
- some fixes and cleanup setting up for a larger set of performance
patches I've been working on
- a contributed fixes relating to 9p/rdma
- some contributed fixes relating to 9p/xen
* tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: fix error reporting in v9fs_dir_release
net/9p: fix bug in client create for .L
9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
9p/xen: fix connection sequence
9p/xen: fix version parsing
fs/9p: Expand setup of writeback cache to all levels
net/9p: Adjust maximum MSIZE to account for p9 header
When connecting the Xen 9pfs frontend to the backend, the "versions"
Xenstore entry written by the backend is parsed in a wrong way.
The "versions" entry is defined to contain the versions supported by
the backend separated by commas (e.g. "1,2"). Today only version "1"
is defined. Unfortunately the frontend doesn't look for "1" being
listed in the entry, but it is expecting the entry to have the value
"1".
This will result in failure as soon as the backend will support e.g.
versions "1" and "2".
Fix that by scanning the entry correctly.
Link: https://lkml.kernel.org/r/20230130113036.7087-2-jgross@suse.com
Fixes: 71ebd71921 ("xen/9pfs: connect to the backend")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
KCSAN reported a race between writing req->status in p9_client_cb and
accessing it in p9_client_rpc's wait_event.
Accesses to req itself is protected by the data barrier (writing req
fields, write barrier, writing status // reading status, read barrier,
reading other req fields), but status accesses themselves apparently
also must be annotated properly with WRITE_ONCE/READ_ONCE when we
access it without locks.
Follows:
- error paths writing status in various threads all can notify
p9_client_rpc, so these all also need WRITE_ONCE
- there's a similar read loop in trans_virtio for zc case that also
needs READ_ONCE
- other reads in trans_fd should be protected by the trans_fd lock and
lists state machine, as corresponding writers all are within trans_fd
and should be under the same lock. If KCSAN complains on them we likely
will have something else to fix as well, so it's better to leave them
unmarked and look again if required.
Link: https://lkml.kernel.org/r/20221205124756.426350-1-asmadeus@codewreck.org
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Instead of a virtual kernel address use a pointer of the associated
struct page as second parameter of gnttab_end_foreign_access().
Most users have that pointer available already and are creating the
virtual address from it, risking problems in case the memory is
located in highmem.
gnttab_end_foreign_access() itself won't need to get the struct page
from the address again.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of __get_free_pages() and free_pages() use alloc_pages_exact()
and free_pages_exact(). This is in preparation of a change of
gnttab_end_foreign_access() which will prohibit use of high-order
pages.
By using the local variable "order" instead of ring->intf->ring_order
in the error path of xen_9pfs_front_alloc_dataring() another bug is
fixed, as the error path can be entered before ring->intf->ring_order
is being set.
By using alloc_pages_exact() the size in bytes is specified for the
allocation, which fixes another bug for the case of
order < (PAGE_SHIFT - XEN_PAGE_SHIFT).
This is part of CVE-2022-23041 / XSA-396.
Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V4:
- new patch
Increase XEN_9PFS_RING_ORDER to 9 for performance reason. Order 9 is the
max allowed by the protocol.
We can't assume that all backends will support order 9. The xenstore
property max-ring-page-order specifies the max order supported by the
backend. We'll use max-ring-page-order for the size of the ring.
This means that the size of the ring is not static
(XEN_FLEX_RING_SIZE(9)) anymore. Change XEN_9PFS_RING_SIZE to take an
argument and base the calculation on the order chosen at setup time.
Finally, modify p9_xen_trans.maxsize to be divided by 4 compared to the
original value. We need to divide it by 2 because we have two rings
coming off the same order allocation: the in and out rings. This was a
mistake in the original code. Also divide it further by 2 because we
don't want a single request/reply to fill up the entire ring. There can
be multiple requests/replies outstanding at any given time and if we use
the full ring with one, we risk forcing the backend to wait for the
client to read back more replies before continuing, which is not
performant.
Link: http://lkml.kernel.org/r/20200521193242.15953-1-sstabellini@kernel.org
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Pull 9p updates from Dominique Martinet:
"Two small fixes to properly cleanup the 9p transports list if
virtio/xen module initialization fail.
9p might otherwise try to access memory from a module that failed to
register got freed"
* tag '9p-for-5.3' of git://github.com/martinetd/linux:
9p/xen: Add cleanup path in p9_trans_xen_init
9p/virtio: Add cleanup path in p9_virtio_init
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
net/9p/trans_xen.c:514:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Link: http://lkml.kernel.org/r/20190123071632.GA8039@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
To avoid use-after-free(s), use a refcount to keep track of the
usable references to any instantiated struct p9_req_t.
This commit adds p9_req_put(), p9_req_get() and p9_req_try_get() as
wrappers to kref_put(), kref_get() and kref_get_unless_zero().
These are used by the client and the transports to keep track of
valid requests' references.
p9_free_req() is added back and used as callback by kref_put().
Add SLAB_TYPESAFE_BY_RCU as it ensures that the memory freed by
kmem_cache_free() will not be reused for another type until the rcu
synchronisation period is over, so an address gotten under rcu read
lock is safe to inc_ref() without corrupting random memory while
the lock is held.
Link: http://lkml.kernel.org/r/1535626341-20693-1-git-send-email-asmadeus@codewreck.org
Co-developed-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+467050c1ce275af2a5b8@syzkaller.appspotmail.com
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Because userspace gets Very Unhappy when calls like stat() and execve()
return -EINTR on 9p filesystem mounts. For instance, when bash is
looking in PATH for things to execute and some SIGCHLD interrupts
stat(), bash can throw a spurious 'command not found' since it doesn't
retry the stat().
In practice, hitting the problem is rare and needs a really
slow/bogged down 9p server.
Cc: stable@vger.kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes the following sparse warnings:
net/9p/trans_xen.c:528:5: warning:
symbol 'p9_trans_xen_init' was not declared. Should it be static?
net/9p/trans_xen.c:540:6: warning:
symbol 'p9_trans_xen_exit' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
In case of error, the function xenbus_read() returns ERR_PTR() and never
returns NULL. The NULL test in the return value check should be replaced
with IS_ERR().
Fixes: 71ebd71921 ("xen/9pfs: connect to the backend")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Implement struct p9_trans_module create and close functions by looking
at the available Xen 9pfs frontend-backend connections. We don't expect
many frontend-backend connections, thus walking a list is OK.
Send requests to the backend by copying each request to one of the
available rings (each frontend-backend connection comes with multiple
rings). Handle the ring and notifications following the 9pfs
specification. If there are not enough free bytes on the ring for the
request, wait on the wait_queue: the backend will send a notification
after consuming more requests.
CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
