Fix the documentation of the devt_from_partuuid() return value.
Fix the following two recently introduced kernel-doc warnings:
block/bdev.c:570: warning: Function parameter or member 'hops' not described in 'bd_finish_claiming'
block/early-lookup.c:46: warning: Function parameter or member 'devt' not described in 'devt_from_partuuid'
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 0718afd47f ("block: introduce holder ops")
Fixes: cf056a4312 ("init: improve the name_to_dev_t interface")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230621165054.743815-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For whole devices ->open is called for each open, but for partitions it
is only called on the first open of a partition, e.g.:
open("/dev/vdb", ...)
open("/dev/vdb", ...)
- 2 call to ->open
open("/dev/vdb1", ...)
open("/dev/vdb", ...)
- 2 call to ->open
open("/dev/vdb", ...)
open("/dev/vdb", ...)
- just open call to ->open
This is problematic as various block drivers look at open flags and
might not do all the required setup if the earlier open was with an
odd flag like O_NDELAY or the magic 3 ioctl-only open mode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code for setting a block device capacity (bd_nr_sectors field of
struct block_device) is duplicated in set_capacity() and
bdev_set_nr_sectors(). Clean this up by making bdev_set_nr_sectors()
a block layer internal function defined in block/bdev.c instead of
having this function statically defined in block/partitions/core.c.
With this change, set_capacity() implementation can be simplified to
only calling bdev_set_nr_sectors().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230424131318.79935-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a long chain of memory dereferencing just to whether or not
this disk has a special submit_bio helper. As that's not necessarily
the common case, add a bd_has_submit_bio state in the bdev to avoid
traversing this memory dependency chain if we don't need to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ->rw_page method is a special purpose bypass of the usual bio handling
path that is limited to single-page reads and writes and synchronous which
causes a lot of extra code in the drivers, callers and the block layer.
The only remaining user is the MM swap code. Switch that swap code to
simply submit a single-vec on-stack bio an synchronously wait on it based
on a newly added QUEUE_FLAG_SYNCHRONOUS flag set by the drivers that
currently implement ->rw_page instead. While this touches one extra cache
line and executes extra code, it simplifies the block layer and drivers
and ensures that all feastures are properly supported by all drivers, e.g.
right now ->rw_page bypassed cgroup writeback entirely.
[akpm@linux-foundation.org: fix comment typo, per Dan]
Link: https://lkml.kernel.org/r/20230125133436.447864-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for STATX_DIOALIGN to block devices, so that direct I/O
alignment restrictions are exposed to userspace in a generic way.
Note that this breaks the tradition of stat operating only on the block
device node, not the block device itself. However, it was felt that
doing this is preferable, in order to make the interface useful and
avoid needing separate interfaces for regular files and block devices.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-3-ebiggers@kernel.org
Pull exfat updates from Namjae Jeon:
- fix referencing wrong parent directory information during rename
- introduce a sys_tz mount option to use system timezone
- improve performance while zeroing a cluster with dirsync mount option
- fix slab-out-bounds in exat_clear_bitmap() reported from syzbot
* tag 'exfat-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: check if cluster num is valid
exfat: reduce block requests when zeroing a cluster
block: add sync_blockdev_range()
exfat: introduce mount option 'sys_tz'
exfat: fix referencing wrong parent directory information after renaming
All manipulation of bd_openers is under disk->open_mutex and will remain
so for the foreseeable future. But at least one place reads it without
the lock (blkdev_get) and there are more to be added. So make sure the
compiler does not do turn the increments and decrements into non-atomic
sequences by using an atomic_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As Luis reported, losetup currently doesn't properly create the loop
device without this if the device node already exists because old
scripts created it manually. So default to y for now and remove the
aggressive removal schedule.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220225181440.1351591-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk->fops->owner is grabbed in blkdev_get_no_open() after the disk
kobject refcount is increased. This way can't make sure that
disk->fops->owner is still alive since del_gendisk() still can move
on if the kobject refcount of disk is grabbed by open() and
disk->fops->open() isn't called yet.
Fixes the issue by moving try_module_get() into blkdev_get_by_dev()
with ->open_mutex() held, then we can drain the in-progress open()
in del_gendisk(). Meantime new open() won't succeed because disk
becomes not alive.
This way is reasonable because blkdev_get_no_open() needn't to touch
disk->fops or defined callbacks.
Cc: Christoph Hellwig <hch@lst.de>
Cc: czhong@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211111020343.316126-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
