Merge branch 'pci/msi'

- Disable MSI for broken Pericom PCIe-USB adapter (Andy Shevchenko)

- Move MSI/MSI-X init to msi.c (Bjorn Helgaas)

- Move MSI/MSI-X flags updaters to msi.c (Bjorn Helgaas)

- Warn if we assign 64-bit MSI address to device that only supports 32-bit
  MSI (Vidya Sagar)

* pci/msi:
  PCI/MSI: Set device flag indicating only 32-bit MSI support
  PCI/MSI: Move MSI/MSI-X flags updaters to msi.c
  PCI/MSI: Move MSI/MSI-X init to msi.c
  PCI: Use predefined Pericom Vendor ID
  PCI: Disable MSI for Pericom PCIe-USB adapter

drivers/pci/Makefile

@@ -5,7 +5,7 @@
 obj-$(CONFIG_PCI)		+= access.o bus.o probe.o host-bridge.o \
 				   remove.o pci.o pci-driver.o search.o \
 				   pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
-				   setup-bus.o vc.o mmap.o setup-irq.o
+				   setup-bus.o vc.o mmap.o setup-irq.o msi.o
 
 obj-$(CONFIG_PCI)		+= pcie/
 
@@ -18,7 +18,6 @@ endif
 obj-$(CONFIG_OF)		+= of.o
 obj-$(CONFIG_PCI_QUIRKS)	+= quirks.o
 obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
-obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_PCI_ATS)		+= ats.o
 obj-$(CONFIG_PCI_IOV)		+= iov.o
 obj-$(CONFIG_PCI_BRIDGE_EMUL)	+= pci-bridge-emul.o

drivers/pci/msi.c

@@ -26,6 +26,8 @@
 
 #include "pci.h"
 
+#ifdef CONFIG_PCI_MSI
+
 static int pci_msi_enable = 1;
 int pci_msi_ignore_mask;
 
@@ -410,6 +412,17 @@ static void pci_intx_for_msi(struct pci_dev *dev, int enable)
 		pci_intx(dev, enable);
 }
 
+static void pci_msi_set_enable(struct pci_dev *dev, int enable)
+{
+	u16 control;
+
+	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
+	control &= ~PCI_MSI_FLAGS_ENABLE;
+	if (enable)
+		control |= PCI_MSI_FLAGS_ENABLE;
+	pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control);
+}
+
 static void __pci_restore_msi_state(struct pci_dev *dev)
 {
 	u16 control;
@@ -432,6 +445,16 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 	pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control);
 }
 
+static void pci_msix_clear_and_set_ctrl(struct pci_dev *dev, u16 clear, u16 set)
+{
+	u16 ctrl;
+
+	pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &ctrl);
+	ctrl &= ~clear;
+	ctrl |= set;
+	pci_write_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, ctrl);
+}
+
 static void __pci_restore_msix_state(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
@@ -600,12 +623,12 @@ static int msi_verify_entries(struct pci_dev *dev)
 	struct msi_desc *entry;
 
 	for_each_pci_msi_entry(entry, dev) {
-		if (!dev->no_64bit_msi || !entry->msg.address_hi)
+		if (entry->msg.address_hi && dev->no_64bit_msi) {
-			continue;
+			pci_err(dev, "arch assigned 64-bit MSI address %#x%08x but device only supports 32 bits\n",
-		pci_err(dev, "Device has broken 64-bit MSI but arch"
+				entry->msg.address_hi, entry->msg.address_lo);
-			" tried to assign one above 4G\n");
 			return -EIO;
 		}
+	}
 	return 0;
 }
 
@@ -1577,3 +1600,40 @@ bool pci_dev_has_special_msi_domain(struct pci_dev *pdev)
 }
 
 #endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */
+#endif /* CONFIG_PCI_MSI */
+
+void pci_msi_init(struct pci_dev *dev)
+{
+	u16 ctrl;
+
+	/*
+	 * Disable the MSI hardware to avoid screaming interrupts
+	 * during boot.  This is the power on reset default so
+	 * usually this should be a noop.
+	 */
+	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (!dev->msi_cap)
+		return;
+
+	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &ctrl);
+	if (ctrl & PCI_MSI_FLAGS_ENABLE)
+		pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS,
+				      ctrl & ~PCI_MSI_FLAGS_ENABLE);
+
+	if (!(ctrl & PCI_MSI_FLAGS_64BIT))
+		dev->no_64bit_msi = 1;
+}
+
+void pci_msix_init(struct pci_dev *dev)
+{
+	u16 ctrl;
+
+	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (!dev->msix_cap)
+		return;
+
+	pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &ctrl);
+	if (ctrl & PCI_MSIX_FLAGS_ENABLE)
+		pci_write_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS,
+				      ctrl & ~PCI_MSIX_FLAGS_ENABLE);
+}

drivers/pci/pci.h

@@ -104,6 +104,8 @@ void pci_config_pm_runtime_get(struct pci_dev *dev);
 void pci_config_pm_runtime_put(struct pci_dev *dev);
 void pci_pm_init(struct pci_dev *dev);
 void pci_ea_init(struct pci_dev *dev);
+void pci_msi_init(struct pci_dev *dev);
+void pci_msix_init(struct pci_dev *dev);
 void pci_allocate_cap_save_buffers(struct pci_dev *dev);
 void pci_free_cap_save_buffers(struct pci_dev *dev);
 bool pci_bridge_d3_possible(struct pci_dev *dev);
@@ -185,27 +187,6 @@ void pci_no_msi(void);
 static inline void pci_no_msi(void) { }
 #endif
 
-static inline void pci_msi_set_enable(struct pci_dev *dev, int enable)
-{
-	u16 control;
-
-	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
-	control &= ~PCI_MSI_FLAGS_ENABLE;
-	if (enable)
-		control |= PCI_MSI_FLAGS_ENABLE;
-	pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control);
-}
-
-static inline void pci_msix_clear_and_set_ctrl(struct pci_dev *dev, u16 clear, u16 set)
-{
-	u16 ctrl;
-
-	pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &ctrl);
-	ctrl &= ~clear;
-	ctrl |= set;
-	pci_write_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, ctrl);
-}
-
 void pci_realloc_get_opt(char *);
 
 static inline int pci_no_d1d2(struct pci_dev *dev)

drivers/pci/probe.c

@@ -1717,22 +1717,6 @@ static u8 pci_hdr_type(struct pci_dev *dev)
 
 #define LEGACY_IO_RESOURCE	(IORESOURCE_IO | IORESOURCE_PCI_FIXED)
 
-static void pci_msi_setup_pci_dev(struct pci_dev *dev)
-{
-	/*
-	 * Disable the MSI hardware to avoid screaming interrupts
-	 * during boot.  This is the power on reset default so
-	 * usually this should be a noop.
-	 */
-	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
-	if (dev->msi_cap)
-		pci_msi_set_enable(dev, 0);
-
-	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
-	if (dev->msix_cap)
-		pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
-}
-
 /**
  * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability
  * @dev: PCI device
@@ -2399,9 +2383,8 @@ void pcie_report_downtraining(struct pci_dev *dev)
 static void pci_init_capabilities(struct pci_dev *dev)
 {
 	pci_ea_init(dev);		/* Enhanced Allocation */
-
+	pci_msi_init(dev);		/* Disable MSI */
-	/* Setup MSI caps & disable MSI/MSI-X interrupts */
+	pci_msix_init(dev);		/* Disable MSI-X */
-	pci_msi_setup_pci_dev(dev);
 
 	/* Buffers for saving PCIe and PCI-X capabilities */
 	pci_allocate_cap_save_buffers(dev);

drivers/pci/quirks.c

@@ -2356,9 +2356,9 @@ static void quirk_enable_clear_retrain_link(struct pci_dev *dev)
 	dev->clear_retrain_link = 1;
 	pci_info(dev, "Enable PCIe Retrain Link quirk\n");
 }
-DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe110, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe110, quirk_enable_clear_retrain_link);
-DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe111, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe111, quirk_enable_clear_retrain_link);
-DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe130, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe130, quirk_enable_clear_retrain_link);
 
 static void fixup_rev1_53c810(struct pci_dev *dev)
 {
@@ -5567,17 +5567,26 @@ static void pci_fixup_no_d0_pme(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
 
 /*
- * Device [12d8:0x400e] and [12d8:0x400f]
+ * Device 12d8:0x400e [OHCI] and 12d8:0x400f [EHCI]
+ *
  * These devices advertise PME# support in all power states but don't
  * reliably assert it.
+ *
+ * These devices also advertise MSI, but documentation (PI7C9X440SL.pdf)
+ * says "The MSI Function is not implemented on this device" in chapters
+ * 7.3.27, 7.3.29-7.3.31.
  */
-static void pci_fixup_no_pme(struct pci_dev *dev)
+static void pci_fixup_no_msi_no_pme(struct pci_dev *dev)
 {
+#ifdef CONFIG_PCI_MSI
+	pci_info(dev, "MSI is not implemented on this device, disabling it\n");
+	dev->no_msi = 1;
+#endif
 	pci_info(dev, "PME# is unreliable, disabling it\n");
 	dev->pme_support = 0;
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_pme);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_msi_no_pme);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_pme);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_msi_no_pme);
 
 static void apex_pci_fixup_class(struct pci_dev *pdev)
 {