Merge tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Add new Qualcomm PMI8998/PM660 SMB2 charger

 - bq256xx: support systems without thermistors

 - cros_pchg: fix peripheral device status after system resume

 - axp20x_usb_power: add support for AXP192

 - qcom-pon: add support for pm8941

 - at91-reset: prepare to expose reset reason to sysfs

 - switch all I2C drivers back to use .probe instead of .probe_new

 - convert some more DT bindings to YAML

 - misc cleanups

* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
  dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
  dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
  power: reset: at91-reset: change the power on reason prototype
  power: reset: qcom-pon: add support for pm8941-pon
  dt-bindings: power: reset: qcom-pon: define pm8941-pon
  power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  power: supply: rt9467: Make charger-enable control as logic level
  power: supply: Switch i2c drivers back to use .probe()
  power: reset: add HAS_IOPORT dependencies
  dt-bindings: power: supply: axp20x: Add AXP192 compatible
  power: supply: axp20x_usb_power: Add support for AXP192
  power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
  power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
  power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
  power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
  power: supply: axp20x_usb_power: Simplify USB current limit handling
  power: supply: hwmon: constify pointers to hwmon_channel_info
  power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
  ...

Documentation/devicetree/bindings/arm/atmel-sysregs.txt

@@ -52,100 +52,6 @@ Example:
 		reg = <0xe3804000 0x1000>;
 };
 
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
-  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
-  Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
-	shdwc@fffffd10 {
-		compatible = "atmel,at91sam9260-shdwc";
-		reg = <0xfffffd10 0x10>;
-		clocks = <&clk32k>;
-	};
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
-  "microchip,sama7g5-shdwc"
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
-  microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
-  by the child, forces the wake-up of the core power supply on a high level.
-  The default is to be active low.
-
-Example:
-
-On the SoC side:
-	shdwc@f8048010 {
-		compatible = "atmel,sama5d2-shdwc";
-		reg = <0xf8048010 0x10>;
-		clocks = <&clk32k>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		atmel,wakeup-rtc-timer;
-	};
-
-On the board side:
-	shdwc@f8048010 {
-		debounce-delay-us = <976>;
-
-		input@0 {
-			reg = <0>;
-		};
-
-		input@1 {
-			reg = <1>;
-			atmel,wakeup-active-high;
-		};
-	};
-
 Special Function Registers (SFR)
 
 Special Function Registers (SFR) manage specific aspects of the integrated

Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml

@@ -134,6 +134,7 @@ patternProperties:
     oneOf:
       - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
       - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
+      - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
 
   "gpio@[0-9a-f]+$":
     type: object

Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-shdwc
+      - atmel,at91sam9rl-shdwc
+      - atmel,at91sam9x5-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  atmel,wakeup-mode:
+    description: operation mode of the wakeup mode
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ none, high, low, any ]
+
+  atmel,wakeup-counter:
+    description: counter on wake-up 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9x5-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9260-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtc-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@fffffd10 {
+        compatible = "atmel,at91sam9260-shdwc";
+        reg = <0xfffffd10 0x10>;
+        clocks = <&clk32k>;
+    };
+
+...

Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml

@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,sama7g5-shdwc
+          - const: syscon
+      - enum:
+          - atmel,sama5d2-shdwc
+          - microchip,sam9x60-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  debounce-delay-us:
+    description:
+      Minimum wake-up inputs debouncer period in microseconds. It is usually a
+      board-related property.
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+patternProperties:
+  "^input@[0-15]$":
+    description:
+      Wake-up input nodes. These are usually described in the "board" part of
+      the Device Tree. Note also that input 0 is linked to the wake-up pin and
+      is frequently used.
+    type: object
+    properties:
+      reg:
+        description: contains the wake-up input index
+        minimum: 0
+        maximum: 15
+
+      atmel,wakeup-active-high:
+        description:
+          The corresponding wake-up input described by the child forces the
+          wake-up of the core power supply on a high level. The default is to
+          be active low.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@f8048010 {
+        compatible = "atmel,sama5d2-shdwc";
+        reg = <0xf8048010 0x10>;
+        clocks = <&clk32k>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        atmel,wakeup-rtc-timer;
+        debounce-delay-us = <976>;
+
+        input@0 {
+            reg = <0>;
+        };
+
+        input@1 {
+            reg = <1>;
+            atmel,wakeup-active-high;
+        };
+    };
+
+...

Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt

@@ -1,26 +0,0 @@
-NVMEM reboot mode driver
-
-This driver gets reboot mode magic value from reboot-mode driver
-and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-Required properties:
-- compatible: should be "nvmem-reboot-mode".
-- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
-- nvmem-cell-names: Should be "reboot-mode".
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-	reboot-mode {
-		compatible = "nvmem-reboot-mode";
-		nvmem-cells = <&reboot_mode>;
-		nvmem-cell-names = "reboot-mode";
-
-		mode-normal     = <0xAAAA5501>;
-		mode-bootloader = <0xBBBB5500>;
-		mode-recovery   = <0xCCCC5502>;
-		mode-test       = <0xDDDD5503>;
-	};

Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic NVMEM reboot mode
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  This driver gets the reboot mode magic value from the reboot-mode driver
+  and stores it in the NVMEM cell named "reboot-mode". The bootloader can
+  then read it and take different action according to the value.
+
+properties:
+  compatible:
+    const: nvmem-reboot-mode
+
+  nvmem-cells:
+    description:
+      A phandle pointing to the nvmem-cells node where the vendor-specific
+      magic value representing the reboot mode is stored.
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: reboot-mode
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+required:
+  - compatible
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    reboot-mode {
+        compatible = "nvmem-reboot-mode";
+        nvmem-cells = <&reboot_reason>;
+        nvmem-cell-names = "reboot-mode";
+        mode-recovery = <0x01>;
+        mode-bootloader = <0x02>;
+    };
+...

Documentation/devicetree/bindings/power/reset/qcom,pon.yaml

@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - qcom,pm8916-pon
+      - qcom,pm8941-pon
       - qcom,pms405-pon
       - qcom,pm8998-pon
       - qcom,pmk8350-pon
@@ -56,7 +57,6 @@ required:
 unevaluatedProperties: false
 
 allOf:
-  - $ref: reboot-mode.yaml#
   - if:
       properties:
         compatible:
@@ -66,12 +66,30 @@ allOf:
               - qcom,pms405-pon
               - qcom,pm8998-pon
     then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
       properties:
         reg:
           maxItems: 1
         reg-names:
           items:
             - const: pon
+
+    # Special case for pm8941, which doesn't store reset mode
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/power/supply/bq256xx.yaml

@@ -68,11 +68,29 @@ properties:
       Interrupt sends an active low, 256 μs pulse to host to report the charger
       device status and faults.
 
+  ti,no-thermistor:
+    type: boolean
+    description: Indicates that no thermistor is connected to the TS pin
+
 required:
   - compatible
   - reg
   - monitored-battery
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,bq25600
+              - ti,bq25601
+              - ti,bq25600d
+              - ti,bq25601d
+    then:
+      properties:
+        ti,no-thermistor: false
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-charger
+      - qcom,pm660-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: usb-plugin
+      - const: bat-ov
+      - const: wdog-bark
+      - const: usbin-icl-change
+
+  io-channels:
+    items:
+      - description: USB in current in uA
+      - description: USB in voltage in uV
+
+  io-channel-names:
+    items:
+      - const: usbin_i
+      - const: usbin_v
+
+  monitored-battery:
+    description: phandle to the simple-battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <4>;
+
+      charger@1000 {
+        compatible = "qcom,pmi8998-charger";
+        reg = <0x1000>;
+
+        interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
+                     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+        io-channels = <&pmi8998_rradc 3>,
+                      <&pmi8998_rradc 4>;
+        io-channel-names = "usbin_i",
+                           "usbin_v";
+
+        monitored-battery = <&battery>;
+      };
+    };

Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml

@@ -22,6 +22,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - x-powers,axp192-usb-power-supply
           - x-powers,axp202-usb-power-supply
           - x-powers,axp221-usb-power-supply
           - x-powers,axp223-usb-power-supply

MAINTAINERS

@@ -14019,6 +14019,7 @@ F:	include/dt-bindings/iio/adc/at91-sama5d2_adc.h
 MICROCHIP SAMA5D2-COMPATIBLE SHUTDOWN CONTROLLER
 M:	Claudiu Beznea <claudiu.beznea@microchip.com>
 S:	Supported
+F:	Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
 F:	drivers/power/reset/at91-sama5d2_shdwc.c
 
 MICROCHIP SOC DRIVERS

drivers/power/reset/Kconfig

@@ -158,6 +158,7 @@ config POWER_RESET_OXNAS
 config POWER_RESET_PIIX4_POWEROFF
 	tristate "Intel PIIX4 power-off driver"
 	depends on PCI
+	depends on HAS_IOPORT
 	depends on MIPS || COMPILE_TEST
 	help
 	  This driver supports powering off a system using the Intel PIIX4

drivers/power/reset/at91-reset.c

@@ -149,11 +149,10 @@ static int at91_reset(struct notifier_block *this, unsigned long mode,
 	return NOTIFY_DONE;
 }
 
-static void __init at91_reset_status(struct platform_device *pdev,
+static const char * __init at91_reset_reason(struct at91_reset *reset)
-				     void __iomem *base)
 {
+	u32 reg = readl(reset->rstc_base + AT91_RSTC_SR);
 	const char *reason;
-	u32 reg = readl(base + AT91_RSTC_SR);
 
 	switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
 	case RESET_TYPE_GENERAL:
@@ -185,7 +184,7 @@ static void __init at91_reset_status(struct platform_device *pdev,
 		break;
 	}
 
-	dev_info(&pdev->dev, "Starting after %s\n", reason);
+	return reason;
 }
 
 static const struct of_device_id at91_ramc_of_match[] = {
@@ -392,7 +391,7 @@ static int __init at91_reset_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_clk;
 
-	at91_reset_status(pdev, reset->rstc_base);
+	dev_info(&pdev->dev, "Starting after %s\n", at91_reset_reason(reset));
 
 	return 0;
 

drivers/power/reset/gpio-restart.c

@@ -105,7 +105,7 @@ static int gpio_restart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int gpio_restart_remove(struct platform_device *pdev)
+static void gpio_restart_remove(struct platform_device *pdev)
 {
 	struct gpio_restart *gpio_restart = platform_get_drvdata(pdev);
 	int ret;
@@ -115,10 +115,7 @@ static int gpio_restart_remove(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 				"%s: cannot unregister restart handler, %d\n",
 				__func__, ret);
-		return -ENODEV;
 	}
-
-	return 0;
 }
 
 static const struct of_device_id of_gpio_restart_match[] = {
@@ -128,7 +125,7 @@ static const struct of_device_id of_gpio_restart_match[] = {
 
 static struct platform_driver gpio_restart_driver = {
 	.probe = gpio_restart_probe,
-	.remove = gpio_restart_remove,
+	.remove_new = gpio_restart_remove,
 	.driver = {
 		.name = "restart-gpio",
 		.of_match_table = of_gpio_restart_match,

drivers/power/reset/qcom-pon.c

@@ -17,6 +17,8 @@
 #define GEN1_REASON_SHIFT		2
 #define GEN2_REASON_SHIFT		1
 
+#define NO_REASON_SHIFT			0
+
 struct pm8916_pon {
 	struct device *dev;
 	struct regmap *regmap;
@@ -45,6 +47,7 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
 static int pm8916_pon_probe(struct platform_device *pdev)
 {
 	struct pm8916_pon *pon;
+	long reason_shift;
 	int error;
 
 	pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
@@ -64,13 +67,17 @@ static int pm8916_pon_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
-	pon->reboot_mode.dev = &pdev->dev;
+	reason_shift = (long)of_device_get_match_data(&pdev->dev);
-	pon->reason_shift = (long)of_device_get_match_data(&pdev->dev);
+
-	pon->reboot_mode.write = pm8916_reboot_mode_write;
+	if (reason_shift != NO_REASON_SHIFT) {
-	error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
+		pon->reboot_mode.dev = &pdev->dev;
-	if (error) {
+		pon->reason_shift = reason_shift;
-		dev_err(&pdev->dev, "can't register reboot mode\n");
+		pon->reboot_mode.write = pm8916_reboot_mode_write;
-		return error;
+		error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
+		if (error) {
+			dev_err(&pdev->dev, "can't register reboot mode\n");
+			return error;
+		}
 	}
 
 	platform_set_drvdata(pdev, pon);
@@ -80,6 +87,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
 
 static const struct of_device_id pm8916_pon_id_table[] = {
 	{ .compatible = "qcom,pm8916-pon", .data = (void *)GEN1_REASON_SHIFT },
+	{ .compatible = "qcom,pm8941-pon", .data = (void *)NO_REASON_SHIFT },
 	{ .compatible = "qcom,pms405-pon", .data = (void *)GEN1_REASON_SHIFT },
 	{ .compatible = "qcom,pm8998-pon", .data = (void *)GEN2_REASON_SHIFT },
 	{ .compatible = "qcom,pmk8350-pon", .data = (void *)GEN2_REASON_SHIFT },

drivers/power/supply/Kconfig

@@ -942,4 +942,13 @@ config BATTERY_UG3105
 	  device is off or suspended, the functionality of this driver is
 	  limited to reporting capacity only.
 
+config CHARGER_QCOM_SMB2
+	tristate "Qualcomm PMI8998 PMIC charger driver"
+	depends on MFD_SPMI_PMIC
+	depends on IIO
+	help
+	  Say Y here to enable the Qualcomm PMIC Charger driver. This
+	  adds support for the SMB2 switch mode battery charger found
+	  in PMI8998 and related PMICs.
+
 endif # POWER_SUPPLY

drivers/power/supply/Makefile

@@ -110,3 +110,4 @@ obj-$(CONFIG_BATTERY_ACER_A500)	+= acer_a500_battery.o
 obj-$(CONFIG_BATTERY_SURFACE)	+= surface_battery.o
 obj-$(CONFIG_CHARGER_SURFACE)	+= surface_charger.o
 obj-$(CONFIG_BATTERY_UG3105)	+= ug3105_battery.o
+obj-$(CONFIG_CHARGER_QCOM_SMB2)	+= qcom_pmi8998_charger.o

drivers/power/supply/adp5061.c

@@ -736,7 +736,7 @@ static struct i2c_driver adp5061_driver = {
 	.driver = {
 		.name = KBUILD_MODNAME,
 	},
-	.probe_new = adp5061_probe,
+	.probe = adp5061_probe,
 	.id_table = adp5061_id,
 };
 module_i2c_driver(adp5061_driver);

drivers/power/supply/axp20x_usb_power.c

@@ -26,45 +26,48 @@
 
 #define DRVNAME "axp20x-usb-power-supply"
 
+#define AXP192_USB_OTG_STATUS		0x04
+
 #define AXP20X_PWR_STATUS_VBUS_PRESENT	BIT(5)
 #define AXP20X_PWR_STATUS_VBUS_USED	BIT(4)
 
 #define AXP20X_USB_STATUS_VBUS_VALID	BIT(2)
 
-#define AXP20X_VBUS_PATH_SEL		BIT(7)
-#define AXP20X_VBUS_PATH_SEL_OFFSET	7
-
 #define AXP20X_VBUS_VHOLD_uV(b)		(4000000 + (((b) >> 3) & 7) * 100000)
 #define AXP20X_VBUS_VHOLD_MASK		GENMASK(5, 3)
 #define AXP20X_VBUS_VHOLD_OFFSET	3
-#define AXP20X_VBUS_CLIMIT_MASK		3
-#define AXP20X_VBUS_CLIMIT_900mA	0
-#define AXP20X_VBUS_CLIMIT_500mA	1
-#define AXP20X_VBUS_CLIMIT_100mA	2
-#define AXP20X_VBUS_CLIMIT_NONE		3
-
-#define AXP813_VBUS_CLIMIT_900mA	0
-#define AXP813_VBUS_CLIMIT_1500mA	1
-#define AXP813_VBUS_CLIMIT_2000mA	2
-#define AXP813_VBUS_CLIMIT_2500mA	3
 
 #define AXP20X_ADC_EN1_VBUS_CURR	BIT(2)
 #define AXP20X_ADC_EN1_VBUS_VOLT	BIT(3)
 
-#define AXP20X_VBUS_MON_VBUS_VALID	BIT(3)
-
-#define AXP813_BC_EN		BIT(0)
-
 /*
  * Note do not raise the debounce time, we must report Vusb high within
  * 100ms otherwise we get Vbus errors in musb.
  */
 #define DEBOUNCE_TIME			msecs_to_jiffies(50)
 
+struct axp_data {
+	const struct power_supply_desc	*power_desc;
+	const char * const		*irq_names;
+	unsigned int			num_irq_names;
+	const int			*curr_lim_table;
+	struct reg_field		curr_lim_fld;
+	struct reg_field		vbus_valid_bit;
+	struct reg_field		vbus_mon_bit;
+	struct reg_field		usb_bc_en_bit;
+	struct reg_field		vbus_disable_bit;
+	bool				vbus_needs_polling: 1;
+};
+
 struct axp20x_usb_power {
 	struct regmap *regmap;
+	struct regmap_field *curr_lim_fld;
+	struct regmap_field *vbus_valid_bit;
+	struct regmap_field *vbus_mon_bit;
+	struct regmap_field *usb_bc_en_bit;
+	struct regmap_field *vbus_disable_bit;
 	struct power_supply *supply;
-	enum axp20x_variants axp20x_id;
+	const struct axp_data *axp_data;
 	struct iio_channel *vbus_v;
 	struct iio_channel *vbus_i;
 	struct delayed_work vbus_detect;
@@ -81,7 +84,7 @@ static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power)
 	 * present->absent transition implies an online->offline transition
 	 * and will trigger the VBUS_REMOVAL IRQ.
 	 */
-	if (power->axp20x_id >= AXP221_ID && !power->online)
+	if (power->axp_data->vbus_needs_polling && !power->online)
 		return true;
 
 	return false;
@@ -121,60 +124,6 @@ out:
 		mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME);
 }
 
-static int axp20x_get_current_max(struct axp20x_usb_power *power, int *val)
-{
-	unsigned int v;
-	int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
-
-	if (ret)
-		return ret;
-
-	switch (v & AXP20X_VBUS_CLIMIT_MASK) {
-	case AXP20X_VBUS_CLIMIT_100mA:
-		if (power->axp20x_id == AXP221_ID)
-			*val = -1; /* No 100mA limit */
-		else
-			*val = 100000;
-		break;
-	case AXP20X_VBUS_CLIMIT_500mA:
-		*val = 500000;
-		break;
-	case AXP20X_VBUS_CLIMIT_900mA:
-		*val = 900000;
-		break;
-	case AXP20X_VBUS_CLIMIT_NONE:
-		*val = -1;
-		break;
-	}
-
-	return 0;
-}
-
-static int axp813_get_current_max(struct axp20x_usb_power *power, int *val)
-{
-	unsigned int v;
-	int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
-
-	if (ret)
-		return ret;
-
-	switch (v & AXP20X_VBUS_CLIMIT_MASK) {
-	case AXP813_VBUS_CLIMIT_900mA:
-		*val = 900000;
-		break;
-	case AXP813_VBUS_CLIMIT_1500mA:
-		*val = 1500000;
-		break;
-	case AXP813_VBUS_CLIMIT_2000mA:
-		*val = 2000000;
-		break;
-	case AXP813_VBUS_CLIMIT_2500mA:
-		*val = 2500000;
-		break;
-	}
-	return 0;
-}
-
 static int axp20x_usb_power_get_property(struct power_supply *psy,
 	enum power_supply_property psp, union power_supply_propval *val)
 {
@@ -213,9 +162,12 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 		val->intval = ret * 1700; /* 1 step = 1.7 mV */
 		return 0;
 	case POWER_SUPPLY_PROP_CURRENT_MAX:
-		if (power->axp20x_id == AXP813_ID)
+		ret = regmap_field_read(power->curr_lim_fld, &v);
-			return axp813_get_current_max(power, &val->intval);
+		if (ret)
-		return axp20x_get_current_max(power, &val->intval);
+			return ret;
+
+		val->intval = power->axp_data->curr_lim_table[v];
+		return 0;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 		if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
 			ret = iio_read_channel_processed(power->vbus_i,
@@ -256,16 +208,15 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 
 		val->intval = POWER_SUPPLY_HEALTH_GOOD;
 
-		if (power->axp20x_id == AXP202_ID) {
+		if (power->vbus_valid_bit) {
-			ret = regmap_read(power->regmap,
+			ret = regmap_field_read(power->vbus_valid_bit, &v);
-					  AXP20X_USB_OTG_STATUS, &v);
 			if (ret)
 				return ret;
 
-			if (!(v & AXP20X_USB_STATUS_VBUS_VALID))
+			if (v == 0)
-				val->intval =
+				val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
-					POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
 		}
+
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT);
@@ -280,16 +231,6 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static int axp813_usb_power_set_online(struct axp20x_usb_power *power,
-				       int intval)
-{
-	int val = !intval << AXP20X_VBUS_PATH_SEL_OFFSET;
-
-	return regmap_update_bits(power->regmap,
-				  AXP20X_VBUS_IPSOUT_MGMT,
-				  AXP20X_VBUS_PATH_SEL, val);
-}
-
 static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
 					    int intval)
 {
@@ -316,50 +257,17 @@ static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
 	return -EINVAL;
 }
 
-static int axp813_usb_power_set_current_max(struct axp20x_usb_power *power,
+static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power, int intval)
-					    int intval)
 {
-	int val;
+	const unsigned int max = GENMASK(power->axp_data->curr_lim_fld.msb,
+					 power->axp_data->curr_lim_fld.lsb);
 
-	switch (intval) {
+	if (intval == -1)
-	case 900000:
-		return regmap_update_bits(power->regmap,
-					  AXP20X_VBUS_IPSOUT_MGMT,
-					  AXP20X_VBUS_CLIMIT_MASK,
-					  AXP813_VBUS_CLIMIT_900mA);
-	case 1500000:
-	case 2000000:
-	case 2500000:
-		val = (intval - 1000000) / 500000;
-		return regmap_update_bits(power->regmap,
-					  AXP20X_VBUS_IPSOUT_MGMT,
-					  AXP20X_VBUS_CLIMIT_MASK, val);
-	default:
 		return -EINVAL;
-	}
 
-	return -EINVAL;
+	for (unsigned int i = 0; i <= max; ++i)
-}
+		if (power->axp_data->curr_lim_table[i] == intval)
-
+			return regmap_field_write(power->curr_lim_fld, i);
-static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
-					    int intval)
-{
-	int val;
-
-	switch (intval) {
-	case 100000:
-		if (power->axp20x_id == AXP221_ID)
-			return -EINVAL;
-		fallthrough;
-	case 500000:
-	case 900000:
-		val = (900000 - intval) / 400000;
-		return regmap_update_bits(power->regmap,
-					  AXP20X_VBUS_IPSOUT_MGMT,
-					  AXP20X_VBUS_CLIMIT_MASK, val);
-	default:
-		return -EINVAL;
-	}
 
 	return -EINVAL;
 }
@@ -372,17 +280,15 @@ static int axp20x_usb_power_set_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
-		if (power->axp20x_id != AXP813_ID)
+		if (!power->vbus_disable_bit)
 			return -EINVAL;
-		return axp813_usb_power_set_online(power, val->intval);
+
+		return regmap_field_write(power->vbus_disable_bit, !val->intval);
 
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
 		return axp20x_usb_power_set_voltage_min(power, val->intval);
 
 	case POWER_SUPPLY_PROP_CURRENT_MAX:
-		if (power->axp20x_id == AXP813_ID)
-			return axp813_usb_power_set_current_max(power,
-								val->intval);
 		return axp20x_usb_power_set_current_max(power, val->intval);
 
 	default:
@@ -405,7 +311,7 @@ static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
 	 * the VBUS input offline.
 	 */
 	if (psp == POWER_SUPPLY_PROP_ONLINE)
-		return power->axp20x_id == AXP813_ID;
+		return power->vbus_disable_bit != NULL;
 
 	return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
 	       psp == POWER_SUPPLY_PROP_CURRENT_MAX;
@@ -461,39 +367,81 @@ static const char * const axp22x_irq_names[] = {
 	"VBUS_REMOVAL",
 };
 
-struct axp_data {
+static int axp192_usb_curr_lim_table[] = {
-	const struct power_supply_desc	*power_desc;
+	-1,
-	const char * const		*irq_names;
+	-1,
-	unsigned int			num_irq_names;
+	500000,
-	enum axp20x_variants		axp20x_id;
+	100000,
+};
+
+static int axp20x_usb_curr_lim_table[] = {
+	900000,
+	500000,
+	100000,
+	-1,
+};
+
+static int axp221_usb_curr_lim_table[] = {
+	900000,
+	500000,
+	-1,
+	-1,
+};
+
+static int axp813_usb_curr_lim_table[] = {
+	900000,
+	1500000,
+	2000000,
+	2500000,
+};
+
+static const struct axp_data axp192_data = {
+	.power_desc	= &axp20x_usb_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.curr_lim_table = axp192_usb_curr_lim_table,
+	.curr_lim_fld   = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1),
+	.vbus_valid_bit = REG_FIELD(AXP192_USB_OTG_STATUS, 2, 2),
+	.vbus_mon_bit   = REG_FIELD(AXP20X_VBUS_MON, 3, 3),
 };
 
 static const struct axp_data axp202_data = {
 	.power_desc	= &axp20x_usb_power_desc,
 	.irq_names	= axp20x_irq_names,
 	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
-	.axp20x_id	= AXP202_ID,
+	.curr_lim_table = axp20x_usb_curr_lim_table,
+	.curr_lim_fld   = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1),
+	.vbus_valid_bit = REG_FIELD(AXP20X_USB_OTG_STATUS, 2, 2),
+	.vbus_mon_bit   = REG_FIELD(AXP20X_VBUS_MON, 3, 3),
 };
 
 static const struct axp_data axp221_data = {
 	.power_desc	= &axp22x_usb_power_desc,
 	.irq_names	= axp22x_irq_names,
 	.num_irq_names	= ARRAY_SIZE(axp22x_irq_names),
-	.axp20x_id	= AXP221_ID,
+	.curr_lim_table = axp221_usb_curr_lim_table,
+	.curr_lim_fld   = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1),
+	.vbus_needs_polling = true,
 };
 
 static const struct axp_data axp223_data = {
 	.power_desc	= &axp22x_usb_power_desc,
 	.irq_names	= axp22x_irq_names,
 	.num_irq_names	= ARRAY_SIZE(axp22x_irq_names),
-	.axp20x_id	= AXP223_ID,
+	.curr_lim_table = axp20x_usb_curr_lim_table,
+	.curr_lim_fld   = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1),
+	.vbus_needs_polling = true,
 };
 
 static const struct axp_data axp813_data = {
 	.power_desc	= &axp22x_usb_power_desc,
 	.irq_names	= axp22x_irq_names,
 	.num_irq_names	= ARRAY_SIZE(axp22x_irq_names),
-	.axp20x_id	= AXP813_ID,
+	.curr_lim_table = axp813_usb_curr_lim_table,
+	.curr_lim_fld   = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1),
+	.usb_bc_en_bit	= REG_FIELD(AXP288_BC_GLOBAL, 0, 0),
+	.vbus_disable_bit = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 7, 7),
+	.vbus_needs_polling = true,
 };
 
 #ifdef CONFIG_PM_SLEEP
@@ -565,6 +513,26 @@ static int configure_adc_registers(struct axp20x_usb_power *power)
 				  AXP20X_ADC_EN1_VBUS_VOLT);
 }
 
+static int axp20x_regmap_field_alloc_optional(struct device *dev,
+					      struct regmap *regmap,
+					      struct reg_field fdesc,
+					      struct regmap_field **fieldp)
+{
+	struct regmap_field *field;
+
+	if (fdesc.reg == 0) {
+		*fieldp = NULL;
+		return 0;
+	}
+
+	field = devm_regmap_field_alloc(dev, regmap, fdesc);
+	if (IS_ERR(field))
+		return PTR_ERR(field);
+
+	*fieldp = field;
+	return 0;
+}
+
 static int axp20x_usb_power_probe(struct platform_device *pdev)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -591,20 +559,47 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, power);
 
-	power->axp20x_id = axp_data->axp20x_id;
+	power->axp_data = axp_data;
 	power->regmap = axp20x->regmap;
 	power->num_irqs = axp_data->num_irq_names;
 
+	power->curr_lim_fld = devm_regmap_field_alloc(&pdev->dev, power->regmap,
+						      axp_data->curr_lim_fld);
+	if (IS_ERR(power->curr_lim_fld))
+		return PTR_ERR(power->curr_lim_fld);
+
+	ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap,
+						 axp_data->vbus_valid_bit,
+						 &power->vbus_valid_bit);
+	if (ret)
+		return ret;
+
+	ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap,
+						 axp_data->vbus_mon_bit,
+						 &power->vbus_mon_bit);
+	if (ret)
+		return ret;
+
+	ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap,
+						 axp_data->usb_bc_en_bit,
+						 &power->usb_bc_en_bit);
+	if (ret)
+		return ret;
+
+	ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap,
+						 axp_data->vbus_disable_bit,
+						 &power->vbus_disable_bit);
+	if (ret)
+		return ret;
+
 	ret = devm_delayed_work_autocancel(&pdev->dev, &power->vbus_detect,
 					   axp20x_usb_power_poll_vbus);
 	if (ret)
 		return ret;
 
-	if (power->axp20x_id == AXP202_ID) {
+	if (power->vbus_mon_bit) {
 		/* Enable vbus valid checking */
-		ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
+		ret = regmap_field_write(power->vbus_mon_bit, 1);
-					 AXP20X_VBUS_MON_VBUS_VALID,
-					 AXP20X_VBUS_MON_VBUS_VALID);
 		if (ret)
 			return ret;
 
@@ -617,10 +612,9 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	if (power->axp20x_id == AXP813_ID) {
+	if (power->usb_bc_en_bit) {
 		/* Enable USB Battery Charging specification detection */
-		ret = regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
+		ret = regmap_field_write(power->usb_bc_en_bit, 1);
-				   AXP813_BC_EN, AXP813_BC_EN);
 		if (ret)
 			return ret;
 	}
@@ -659,6 +653,9 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 
 static const struct of_device_id axp20x_usb_power_match[] = {
 	{
+		.compatible = "x-powers,axp192-usb-power-supply",
+		.data = &axp192_data,
+	}, {
 		.compatible = "x-powers,axp202-usb-power-supply",
 		.data = &axp202_data,
 	}, {

drivers/power/supply/bd99954-charger.c

@@ -1077,7 +1077,7 @@ static struct i2c_driver bd9995x_driver = {
 		.name = "bd9995x-charger",
 		.of_match_table = bd9995x_of_match,
 	},
-	.probe_new = bd9995x_probe,
+	.probe = bd9995x_probe,
 };
 module_i2c_driver(bd9995x_driver);
 

drivers/power/supply/bq2415x_charger.c

@@ -1780,7 +1780,7 @@ static struct i2c_driver bq2415x_driver = {
 		.of_match_table = of_match_ptr(bq2415x_of_match_table),
 		.acpi_match_table = ACPI_PTR(bq2415x_i2c_acpi_match),
 	},
-	.probe_new = bq2415x_probe,
+	.probe = bq2415x_probe,
 	.remove = bq2415x_remove,
 	.id_table = bq2415x_i2c_id_table,
 };

drivers/power/supply/bq24190_charger.c

@@ -2034,7 +2034,7 @@ static const struct of_device_id bq24190_of_match[] = {
 MODULE_DEVICE_TABLE(of, bq24190_of_match);
 
 static struct i2c_driver bq24190_driver = {
-	.probe_new	= bq24190_probe,
+	.probe		= bq24190_probe,
 	.remove		= bq24190_remove,
 	.shutdown	= bq24190_shutdown,
 	.id_table	= bq24190_i2c_ids,

drivers/power/supply/bq24257_charger.c

@@ -1165,7 +1165,7 @@ static struct i2c_driver bq24257_driver = {
 		.acpi_match_table = ACPI_PTR(bq24257_acpi_match),
 		.pm = &bq24257_pm,
 	},
-	.probe_new = bq24257_probe,
+	.probe = bq24257_probe,
 	.remove = bq24257_remove,
 	.id_table = bq24257_i2c_ids,
 };

drivers/power/supply/bq24735-charger.c

@@ -505,7 +505,7 @@ static struct i2c_driver bq24735_charger_driver = {
 		.name = "bq24735-charger",
 		.of_match_table = bq24735_match_ids,
 	},
-	.probe_new = bq24735_charger_probe,
+	.probe = bq24735_charger_probe,
 	.id_table = bq24735_charger_id,
 };
 

drivers/power/supply/bq2515x_charger.c

@@ -1158,7 +1158,7 @@ static struct i2c_driver bq2515x_driver = {
 		.name = "bq2515x-charger",
 		.of_match_table = bq2515x_of_match,
 	},
-	.probe_new = bq2515x_probe,
+	.probe = bq2515x_probe,
 	.id_table = bq2515x_i2c_ids,
 };
 module_i2c_driver(bq2515x_driver);

drivers/power/supply/bq256xx_charger.c

@@ -41,6 +41,9 @@
 #define BQ256XX_IINDPM_MAX_uA		3200000
 #define BQ256XX_IINDPM_DEF_uA		2400000
 
+#define BQ256XX_TS_IGNORE		BIT(6)
+#define BQ256XX_TS_IGNORE_SHIFT		6
+
 #define BQ256XX_VINDPM_MASK		GENMASK(3, 0)
 #define BQ256XX_VINDPM_STEP_uV		100000
 #define BQ256XX_VINDPM_OFFSET_uV	3900000
@@ -156,6 +159,7 @@
  * @vindpm: input voltage limit
  * @ichg_max: maximum fast charge current
  * @vbatreg_max: maximum charge voltage
+ * @ts_ignore: TS_IGNORE flag
  */
 struct bq256xx_init_data {
 	u32 ichg;
@@ -166,6 +170,7 @@ struct bq256xx_init_data {
 	u32 vindpm;
 	u32 ichg_max;
 	u32 vbatreg_max;
+	bool ts_ignore;
 };
 
 /**
@@ -263,6 +268,7 @@ struct bq256xx_device {
  * @bq256xx_set_iprechg: pointer to instance specific set_iprechg function
  * @bq256xx_set_vindpm: pointer to instance specific set_vindpm function
  * @bq256xx_set_charge_type: pointer to instance specific set_charge_type function
+ * @bq256xx_set_ts_ignore: pointer to instance specific set_ts_ignore function
  *
  * @bq256xx_def_ichg: default ichg value in microamps
  * @bq256xx_def_iindpm: default iindpm value in microamps
@@ -295,6 +301,7 @@ struct bq256xx_chip_info {
 	int (*bq256xx_set_iprechg)(struct bq256xx_device *bq, int iprechg);
 	int (*bq256xx_set_vindpm)(struct bq256xx_device *bq, int vindpm);
 	int (*bq256xx_set_charge_type)(struct bq256xx_device *bq, int type);
+	int (*bq256xx_set_ts_ignore)(struct bq256xx_device *bq, bool ts_ignore);
 
 	int bq256xx_def_ichg;
 	int bq256xx_def_iindpm;
@@ -696,6 +703,12 @@ static int bq25601d_set_chrg_volt(struct bq256xx_device *bq, int vbatreg)
 						BQ256XX_VBATREG_BIT_SHIFT);
 }
 
+static int bq256xx_set_ts_ignore(struct bq256xx_device *bq, bool ts_ignore)
+{
+	return regmap_update_bits(bq->regmap, BQ256XX_INPUT_CURRENT_LIMIT,
+				BQ256XX_TS_IGNORE, (ts_ignore ? 1 : 0) << BQ256XX_TS_IGNORE_SHIFT);
+}
+
 static int bq256xx_get_prechrg_curr(struct bq256xx_device *bq)
 {
 	unsigned int prechg_and_term_curr_lim;
@@ -1312,6 +1325,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_get_iterm = bq256xx_get_term_curr,
 		.bq256xx_get_iprechg = bq256xx_get_prechrg_curr,
 		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_set_ichg = bq256xx_set_ichg_curr,
 		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
@@ -1351,6 +1365,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
 		.bq256xx_set_charge_type = bq256xx_set_charge_type,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1382,6 +1397,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
 		.bq256xx_set_charge_type = bq256xx_set_charge_type,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1413,6 +1429,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
 		.bq256xx_set_charge_type = bq256xx_set_charge_type,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1444,6 +1461,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
 		.bq256xx_set_charge_type = bq256xx_set_charge_type,
+		.bq256xx_set_ts_ignore = bq256xx_set_ts_ignore,
 
 		.bq256xx_def_ichg = BQ25611D_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1475,6 +1493,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iprechg = bq25618_619_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
 		.bq256xx_set_charge_type = bq256xx_set_charge_type,
+		.bq256xx_set_ts_ignore = bq256xx_set_ts_ignore,
 
 		.bq256xx_def_ichg = BQ25618_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1506,6 +1525,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iprechg = bq25618_619_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
 		.bq256xx_set_charge_type = bq256xx_set_charge_type,
+		.bq256xx_set_ts_ignore = bq256xx_set_ts_ignore,
 
 		.bq256xx_def_ichg = BQ25618_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1622,6 +1642,12 @@ static int bq256xx_hw_init(struct bq256xx_device *bq)
 	if (ret)
 		return ret;
 
+	if (bq->chip_info->bq256xx_set_ts_ignore) {
+		ret = bq->chip_info->bq256xx_set_ts_ignore(bq, bq->init_data.ts_ignore);
+		if (ret)
+			return ret;
+	}
+
 	power_supply_put_battery_info(bq->charger, bat_info);
 
 	return 0;
@@ -1656,6 +1682,8 @@ static int bq256xx_parse_dt(struct bq256xx_device *bq,
 	if (ret)
 		bq->init_data.iindpm = bq->chip_info->bq256xx_def_iindpm;
 
+	bq->init_data.ts_ignore = device_property_read_bool(bq->dev, "ti,no-thermistor");
+
 	return 0;
 }
 
@@ -1784,7 +1812,7 @@ static struct i2c_driver bq256xx_driver = {
 		.of_match_table = bq256xx_of_match,
 		.acpi_match_table = bq256xx_acpi_match,
 	},
-	.probe_new = bq256xx_probe,
+	.probe = bq256xx_probe,
 	.id_table = bq256xx_i2c_ids,
 };
 module_i2c_driver(bq256xx_driver);

drivers/power/supply/bq25890_charger.c

@@ -1649,7 +1649,7 @@ static struct i2c_driver bq25890_driver = {
 		.acpi_match_table = ACPI_PTR(bq25890_acpi_match),
 		.pm = &bq25890_pm,
 	},
-	.probe_new = bq25890_probe,
+	.probe = bq25890_probe,
 	.remove = bq25890_remove,
 	.shutdown = bq25890_shutdown,
 	.id_table = bq25890_i2c_ids,

drivers/power/supply/bq25980_charger.c

@@ -1287,7 +1287,7 @@ static struct i2c_driver bq25980_driver = {
 		.name = "bq25980-charger",
 		.of_match_table = bq25980_of_match,
 	},
-	.probe_new = bq25980_probe,
+	.probe = bq25980_probe,
 	.id_table = bq25980_i2c_ids,
 };
 module_i2c_driver(bq25980_driver);

drivers/power/supply/bq27xxx_battery_i2c.c

@@ -296,7 +296,7 @@ static struct i2c_driver bq27xxx_battery_i2c_driver = {
 		.name = "bq27xxx-battery",
 		.of_match_table = of_match_ptr(bq27xxx_battery_i2c_of_match_table),
 	},
-	.probe_new = bq27xxx_battery_i2c_probe,
+	.probe = bq27xxx_battery_i2c_probe,
 	.remove = bq27xxx_battery_i2c_remove,
 	.id_table = bq27xxx_i2c_id_table,
 };

drivers/power/supply/cros_peripheral_charger.c

@@ -227,8 +227,7 @@ static int cros_pchg_get_prop(struct power_supply *psy,
 	return 0;
 }
 
-static int cros_pchg_event(const struct charger_data *charger,
+static int cros_pchg_event(const struct charger_data *charger)
-			   unsigned long host_event)
 {
 	int i;
 
@@ -256,7 +255,7 @@ static int cros_ec_notify(struct notifier_block *nb,
 	if (!(host_event & EC_MKBP_PCHG_DEVICE_EVENT))
 		return NOTIFY_DONE;
 
-	return cros_pchg_event(charger, host_event);
+	return cros_pchg_event(charger);
 }
 
 static int cros_pchg_probe(struct platform_device *pdev)
@@ -281,6 +280,8 @@ static int cros_pchg_probe(struct platform_device *pdev)
 	charger->ec_dev = ec_dev;
 	charger->ec_device = ec_device;
 
+	platform_set_drvdata(pdev, charger);
+
 	ret = cros_pchg_port_count(charger);
 	if (ret <= 0) {
 		/*
@@ -349,9 +350,27 @@ static int cros_pchg_probe(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int __maybe_unused cros_pchg_resume(struct device *dev)
+{
+	struct charger_data *charger = dev_get_drvdata(dev);
+
+	/*
+	 * Sync all ports on resume in case reports from EC are lost during
+	 * the last suspend.
+	 */
+	cros_pchg_event(charger);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_pchg_pm_ops, NULL, cros_pchg_resume);
+
 static struct platform_driver cros_pchg_driver = {
 	.driver = {
 		.name = DRV_NAME,
+		.pm = &cros_pchg_pm_ops,
 	},
 	.probe = cros_pchg_probe
 };

drivers/power/supply/cw2015_battery.c

@@ -747,7 +747,7 @@ static struct i2c_driver cw_bat_driver = {
 		.of_match_table = cw2015_of_match,
 		.pm = &cw_bat_pm_ops,
 	},
-	.probe_new = cw_bat_probe,
+	.probe = cw_bat_probe,
 	.id_table = cw_bat_id_table,
 };
 

drivers/power/supply/ds2782_battery.c

@@ -458,7 +458,7 @@ static struct i2c_driver ds278x_battery_driver = {
 		.name	= "ds2782-battery",
 		.pm	= &ds278x_battery_pm_ops,
 	},
-	.probe_new	= ds278x_battery_probe,
+	.probe		= ds278x_battery_probe,
 	.remove		= ds278x_battery_remove,
 	.id_table	= ds278x_id,
 };

drivers/power/supply/ip5xxx_power.c

@@ -625,7 +625,7 @@ static const struct of_device_id ip5xxx_power_of_match[] = {
 MODULE_DEVICE_TABLE(of, ip5xxx_power_of_match);
 
 static struct i2c_driver ip5xxx_power_driver = {
-	.probe_new	= ip5xxx_power_probe,
+	.probe		= ip5xxx_power_probe,
 	.driver		= {
 		.name		= "ip5xxx-power",
 		.of_match_table	= ip5xxx_power_of_match,

drivers/power/supply/lp8727_charger.c

@@ -615,7 +615,7 @@ static struct i2c_driver lp8727_driver = {
 		   .name = "lp8727",
 		   .of_match_table = of_match_ptr(lp8727_dt_ids),
 		   },
-	.probe_new = lp8727_probe,
+	.probe = lp8727_probe,
 	.remove = lp8727_remove,
 	.id_table = lp8727_ids,
 };

drivers/power/supply/ltc2941-battery-gauge.c

@@ -635,7 +635,7 @@ static struct i2c_driver ltc294x_driver = {
 		.of_match_table = ltc294x_i2c_of_match,
 		.pm	= LTC294X_PM_OPS,
 	},
-	.probe_new	= ltc294x_i2c_probe,
+	.probe		= ltc294x_i2c_probe,
 	.shutdown	= ltc294x_i2c_shutdown,
 	.id_table	= ltc294x_i2c_id,
 };

drivers/power/supply/ltc4162-l-charger.c

@@ -915,7 +915,7 @@ static const struct of_device_id ltc4162l_of_match[] __maybe_unused = {
 MODULE_DEVICE_TABLE(of, ltc4162l_of_match);
 
 static struct i2c_driver ltc4162l_driver = {
-	.probe_new	= ltc4162l_probe,
+	.probe		= ltc4162l_probe,
 	.alert		= ltc4162l_alert,
 	.id_table	= ltc4162l_i2c_id_table,
 	.driver = {

drivers/power/supply/max14656_charger_detector.c

@@ -316,7 +316,7 @@ static struct i2c_driver max14656_i2c_driver = {
 		.name	= "max14656",
 		.of_match_table = max14656_match_table,
 	},
-	.probe_new	= max14656_probe,
+	.probe		= max14656_probe,
 	.id_table	= max14656_id,
 };
 module_i2c_driver(max14656_i2c_driver);

drivers/power/supply/max17040_battery.c

@@ -599,7 +599,7 @@ static struct i2c_driver max17040_i2c_driver = {
 		.of_match_table = max17040_of_match,
 		.pm	= MAX17040_PM_OPS,
 	},
-	.probe_new	= max17040_probe,
+	.probe		= max17040_probe,
 	.id_table	= max17040_id,
 };
 module_i2c_driver(max17040_i2c_driver);

drivers/power/supply/max17042_battery.c

@@ -499,11 +499,6 @@ static int max17042_property_is_writeable(struct power_supply *psy,
 	return ret;
 }
 
-static void max17042_external_power_changed(struct power_supply *psy)
-{
-	power_supply_changed(psy);
-}
-
 static int max17042_write_verify_reg(struct regmap *map, u8 reg, u32 value)
 {
 	int retries = 8;
@@ -1016,7 +1011,7 @@ static const struct power_supply_desc max17042_psy_desc = {
 	.get_property	= max17042_get_property,
 	.set_property	= max17042_set_property,
 	.property_is_writeable	= max17042_property_is_writeable,
-	.external_power_changed	= max17042_external_power_changed,
+	.external_power_changed	= power_supply_changed,
 	.properties	= max17042_battery_props,
 	.num_properties	= ARRAY_SIZE(max17042_battery_props),
 };
@@ -1220,7 +1215,7 @@ static struct i2c_driver max17042_i2c_driver = {
 		.of_match_table = of_match_ptr(max17042_dt_match),
 		.pm	= &max17042_pm_ops,
 	},
-	.probe_new	= max17042_probe,
+	.probe		= max17042_probe,
 	.id_table	= max17042_id,
 };
 module_i2c_driver(max17042_i2c_driver);

drivers/power/supply/max77976_charger.c

@@ -499,7 +499,7 @@ static struct i2c_driver max77976_driver = {
 		.name		= MAX77976_DRIVER_NAME,
 		.of_match_table	= max77976_of_id,
 	},
-	.probe_new	= max77976_probe,
+	.probe		= max77976_probe,
 	.id_table	= max77976_i2c_id,
 };
 module_i2c_driver(max77976_driver);

drivers/power/supply/power_supply_hwmon.c

@@ -293,7 +293,7 @@ static const struct hwmon_ops power_supply_hwmon_ops = {
 	.read_string	= power_supply_hwmon_read_string,
 };
 
-static const struct hwmon_channel_info *power_supply_hwmon_info[] = {
+static const struct hwmon_channel_info * const power_supply_hwmon_info[] = {
 	HWMON_CHANNEL_INFO(temp,
 			   HWMON_T_LABEL     |
 			   HWMON_T_INPUT     |

drivers/power/supply/rk817_charger.c

@@ -1134,7 +1134,7 @@ static int rk817_charger_probe(struct platform_device *pdev)
 					    &bat_info);
 	if (ret) {
 		return dev_err_probe(dev, ret,
-				     "Unable to get battery info: %d\n", ret);
+				     "Unable to get battery info\n");
 	}
 
 	if ((bat_info->charge_full_design_uah <= 0) ||

drivers/power/supply/rt5033_battery.c

@@ -196,7 +196,7 @@ static struct i2c_driver rt5033_battery_driver = {
 		.name = "rt5033-battery",
 		.of_match_table = rt5033_battery_of_match,
 	},
-	.probe_new = rt5033_battery_probe,
+	.probe = rt5033_battery_probe,
 	.remove = rt5033_battery_remove,
 	.id_table = rt5033_battery_id,
 };

drivers/power/supply/rt9455_charger.c

@@ -1737,7 +1737,7 @@ MODULE_DEVICE_TABLE(acpi, rt9455_i2c_acpi_match);
 #endif
 
 static struct i2c_driver rt9455_driver = {
-	.probe_new	= rt9455_probe,
+	.probe		= rt9455_probe,
 	.remove		= rt9455_remove,
 	.id_table	= rt9455_i2c_id_table,
 	.driver = {

drivers/power/supply/rt9467-charger.c

@@ -1192,7 +1192,7 @@ static int rt9467_charger_probe(struct i2c_client *i2c)
 	i2c_set_clientdata(i2c, data);
 
 	/* Default pull charge enable gpio to make 'CHG_EN' by SW control only */
-	ceb_gpio = devm_gpiod_get_optional(dev, "charge-enable", GPIOD_OUT_LOW);
+	ceb_gpio = devm_gpiod_get_optional(dev, "charge-enable", GPIOD_OUT_HIGH);
 	if (IS_ERR(ceb_gpio))
 		return dev_err_probe(dev, PTR_ERR(ceb_gpio),
 				     "Failed to config charge enable gpio\n");
@@ -1272,7 +1272,7 @@ static struct i2c_driver rt9467_charger_driver = {
 		.name = "rt9467-charger",
 		.of_match_table = rt9467_charger_of_match_table,
 	},
-	.probe_new = rt9467_charger_probe,
+	.probe = rt9467_charger_probe,
 };
 module_i2c_driver(rt9467_charger_driver);
 

drivers/power/supply/rt9471.c

@@ -919,7 +919,7 @@ static struct i2c_driver rt9471_driver = {
 		.name = "rt9471",
 		.of_match_table = rt9471_of_device_id,
 	},
-	.probe_new = rt9471_probe,
+	.probe = rt9471_probe,
 	.shutdown = rt9471_shutdown,
 };
 module_i2c_driver(rt9471_driver);

drivers/power/supply/sbs-battery.c

@@ -1275,7 +1275,7 @@ static const struct of_device_id sbs_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, sbs_dt_ids);
 
 static struct i2c_driver sbs_battery_driver = {
-	.probe_new	= sbs_probe,
+	.probe		= sbs_probe,
 	.alert		= sbs_alert,
 	.id_table	= sbs_id,
 	.driver = {

drivers/power/supply/sbs-charger.c

@@ -240,7 +240,7 @@ static const struct i2c_device_id sbs_id[] = {
 MODULE_DEVICE_TABLE(i2c, sbs_id);
 
 static struct i2c_driver sbs_driver = {
-	.probe_new	= sbs_probe,
+	.probe		= sbs_probe,
 	.id_table	= sbs_id,
 	.driver = {
 		.name	= "sbs-charger",

drivers/power/supply/sbs-manager.c

@@ -409,7 +409,7 @@ static struct i2c_driver sbsm_driver = {
 		.name = "sbsm",
 		.of_match_table = of_match_ptr(sbsm_dt_ids),
 	},
-	.probe_new	= sbsm_probe,
+	.probe		= sbsm_probe,
 	.alert		= sbsm_alert,
 	.id_table	= sbsm_ids
 };

drivers/power/supply/smb347-charger.c

@@ -1629,7 +1629,7 @@ static struct i2c_driver smb347_driver = {
 		.name = "smb347",
 		.of_match_table = smb3xx_of_match,
 	},
-	.probe_new = smb347_probe,
+	.probe = smb347_probe,
 	.remove = smb347_remove,
 	.shutdown = smb347_shutdown,
 	.id_table = smb347_id,

drivers/power/supply/twl4030_madc_battery.c

@@ -168,19 +168,13 @@ static int twl4030_madc_bat_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static void twl4030_madc_bat_ext_changed(struct power_supply *psy)
-{
-	power_supply_changed(psy);
-}
-
 static const struct power_supply_desc twl4030_madc_bat_desc = {
 	.name			= "twl4030_battery",
 	.type			= POWER_SUPPLY_TYPE_BATTERY,
 	.properties		= twl4030_madc_bat_props,
 	.num_properties		= ARRAY_SIZE(twl4030_madc_bat_props),
 	.get_property		= twl4030_madc_bat_get_property,
-	.external_power_changed	= twl4030_madc_bat_ext_changed,
+	.external_power_changed	= power_supply_changed,
-
 };
 
 static int twl4030_cmp(const void *a, const void *b)

drivers/power/supply/ucs1002_power.c

@@ -680,7 +680,7 @@ static struct i2c_driver ucs1002_driver = {
 		   .name = "ucs1002",
 		   .of_match_table = ucs1002_of_match,
 	},
-	.probe_new = ucs1002_probe,
+	.probe = ucs1002_probe,
 };
 module_i2c_driver(ucs1002_driver);
 

drivers/power/supply/ug3105_battery.c

@@ -476,7 +476,7 @@ static struct i2c_driver ug3105_i2c_driver = {
 		.name = "ug3105",
 		.pm = &ug3105_pm_ops,
 	},
-	.probe_new = ug3105_probe,
+	.probe = ug3105_probe,
 	.id_table = ug3105_id,
 };
 module_i2c_driver(ug3105_i2c_driver);