IronOS/source/Core/Drivers/USBPD.cpp

#include "USBPD.h"
#include "configuration.h"
#if POW_PD

#include "BSP_PD.h"
#include "FreeRTOS.h"
#include "fusb302b.h"
#include "main.hpp"
#include "pd.h"
#include "policy_engine.h"

#ifndef USB_PD_VMAX
#error Max PD Voltage must be defined
#endif
#ifndef TIP_RESISTANCE
#error Tip resistance must be defined
#endif

void ms_delay(uint32_t delayms) {
  // Convert ms -> ticks
  TickType_t ticks = delayms / portTICK_PERIOD_MS;

  vTaskDelay(ticks ? ticks : 1); /* Minimum delay = 1 tick */
}
uint32_t get_ms_timestamp() {
  // Convert ticks -> ms
  return xTaskGetTickCount() * portTICK_PERIOD_MS;
}
bool         pdbs_dpm_evaluate_capability(const pd_msg *capabilities, pd_msg *request);
void         pdbs_dpm_get_sink_capability(pd_msg *cap, const bool isPD3);
FUSB302      fusb((0x22 << 1), fusb_read_buf, fusb_write_buf, ms_delay); // Create FUSB driver
PolicyEngine pe(fusb, get_ms_timestamp, ms_delay, pdbs_dpm_get_sink_capability, pdbs_dpm_evaluate_capability);
int          USBPowerDelivery::detectionState = 0;
uint16_t     requested_voltage_mv             = 0;

/* The current draw when the output is disabled */
#define DPM_MIN_CURRENT PD_MA2PDI(100)

// Start processing
bool USBPowerDelivery::start() {
  if (fusbPresent() && fusb.fusb_setup()) {
    setupFUSBIRQ();
    return true;
  }
  return false;
}
void    USBPowerDelivery::IRQOccured() { pe.IRQOccured(); }
bool    USBPowerDelivery::negotiationHasWorked() { return pe.pdHasNegotiated(); }
uint8_t USBPowerDelivery::getStateNumber() { return pe.currentStateCode(true); }
void    USBPowerDelivery::step() {
  while (pe.thread()) {}
}

void USBPowerDelivery::PPSTimerCallback() { pe.PPSTimerCallback(); }
bool USBPowerDelivery::negotiationComplete() {
  if (!fusbPresent()) {
    return true;
  }
  return pe.setupCompleteOrTimedOut(getSettingValue(SettingsOptions::PDNegTimeout));
}
bool USBPowerDelivery::fusbPresent() {
  if (detectionState == 0) {
    if (fusb.fusb_read_id()) {
      detectionState = 1;
    }
  }
  return detectionState == 1;
}

bool USBPowerDelivery::isVBUSConnected() {
  static uint8_t state = 0;
  if (state) {
    return state == 1;
  }
  if (fusb.isVBUSConnected()) {
    state = 1;
    return true;
  } else {
    state = 2;
    return false;
  }
}
pd_msg  lastCapabilities;
pd_msg *USBPowerDelivery::getLastSeenCapabilities() { return &lastCapabilities; }

bool pdbs_dpm_evaluate_capability(const pd_msg *capabilities, pd_msg *request) {
  memcpy(&lastCapabilities, capabilities, sizeof(pd_msg));
  /* Get the number of PDOs */
  uint8_t numobj = PD_NUMOBJ_GET(capabilities);

  /* Make sure we have configuration */
  /* Look at the PDOs to see if one matches our desires */
  // Look against USB_PD_Desired_Levels to select in order of preference
  uint8_t bestIndex        = 0xFF;
  int     bestIndexVoltage = 0;
  int     bestIndexCurrent = 0;
  bool    bestIsPPS        = false;
  powerSupplyWattageLimit  = 0;
  for (uint8_t i = 0; i < numobj; i++) {
    /* If we have a fixed PDO, its V equals our desired V, and its I is
     * at least our desired I */
    if ((capabilities->obj[i] & PD_PDO_TYPE) == PD_PDO_TYPE_FIXED) {
      // This is a fixed PDO entry
      // Evaluate if it can produve sufficient current based on the TIP_RESISTANCE (ohms*10)
      // V=I*R -> V/I => minimum resistance, if our tip resistance is >= this then we can use this supply

      int voltage_mv             = PD_PDV2MV(PD_PDO_SRC_FIXED_VOLTAGE_GET(capabilities->obj[i])); // voltage in mV units
      int current_a_x100         = PD_PDO_SRC_FIXED_CURRENT_GET(capabilities->obj[i]);            // current in 10mA units
      int min_resistance_ohmsx10 = voltage_mv / current_a_x100;
      if (voltage_mv <= (USB_PD_VMAX * 1000)) {
#ifdef MODEL_HAS_DCDC
        // If this device has step down DC/DC inductor to smooth out current spikes
        // We can instead ignore resistance and go for max voltage we can accept
        min_resistance_ohmsx10 = TIP_RESISTANCE;
#endif
        // Fudge of 0.5 ohms to round up a little to account for other losses
        if (min_resistance_ohmsx10 <= (TIP_RESISTANCE + 5)) {
          // This is a valid power source we can select as
          if ((voltage_mv > bestIndexVoltage) || bestIndex == 0xFF) {
            // Higher voltage and valid, select this instead
            bestIndex        = i;
            bestIndexVoltage = voltage_mv;
            bestIndexCurrent = current_a_x100;
            bestIsPPS        = false;
#ifdef MODEL_HAS_DCDC
            // set limiter for wattage
            powerSupplyWattageLimit = ((voltage_mv * current_a_x100) / 100 / 1000);
#endif
          }
        }
      }
    } else if ((capabilities->obj[i] & PD_PDO_TYPE) == PD_PDO_TYPE_AUGMENTED && (capabilities->obj[i] & PD_APDO_TYPE) == PD_APDO_TYPE_PPS) {
      // If this is a PPS slot, calculate the max voltage in the PPS range that can we be used and maintain
      uint16_t max_voltage = PD_PAV2MV(PD_APDO_PPS_MAX_VOLTAGE_GET(capabilities->obj[i]));
      // uint16_t min_voltage = PD_PAV2MV(PD_APDO_PPS_MIN_VOLTAGE_GET(capabilities->obj[i]));
      uint16_t max_current = PD_PAI2CA(PD_APDO_PPS_CURRENT_GET(capabilities->obj[i])); // max current in 10mA units
      // Using the current and tip resistance, calculate the ideal max voltage
      // if this is range, then we will work with this voltage
      // if this is not in range; then max_voltage can be safely selected
      int ideal_voltage_mv = (TIP_RESISTANCE * max_current);
      if (ideal_voltage_mv > max_voltage) {
        ideal_voltage_mv = max_voltage; // constrain
      }
      if (ideal_voltage_mv > (USB_PD_VMAX * 1000)) {
        ideal_voltage_mv = (USB_PD_VMAX * 1000); // constrain to model max
      }
      if (ideal_voltage_mv > bestIndexVoltage || bestIndex == 0xFF) {
        bestIndex        = i;
        bestIndexVoltage = ideal_voltage_mv;
        bestIndexCurrent = max_current;
        bestIsPPS        = true;
#ifdef MODEL_HAS_DCDC
        // set limiter for wattage
        powerSupplyWattageLimit = ((ideal_voltage_mv * max_current) / 100 / 1000);
#endif
      }
    }
  }

  if (bestIndex != 0xFF) {
    /* We got what we wanted, so build a request for that */
    request->hdr = PD_MSGTYPE_REQUEST | PD_NUMOBJ(1);
    if (bestIsPPS) {
      request->obj[0] = PD_RDO_PROG_CURRENT_SET(PD_CA2PAI(bestIndexCurrent)) | PD_RDO_PROG_VOLTAGE_SET(PD_MV2PRV(bestIndexVoltage)) | PD_RDO_NO_USB_SUSPEND | PD_RDO_OBJPOS_SET(bestIndex + 1);
    } else {
      request->obj[0] = PD_RDO_FV_MAX_CURRENT_SET(bestIndexCurrent) | PD_RDO_FV_CURRENT_SET(bestIndexCurrent) | PD_RDO_NO_USB_SUSPEND | PD_RDO_OBJPOS_SET(bestIndex + 1);
    }
    // We dont do usb
    // request->obj[0] |= PD_RDO_USB_COMMS;

    /* Update requested voltage */
    requested_voltage_mv = bestIndexVoltage;

  } else {
    /* Nothing matched (or no configuration), so get 5 V at low current */
    request->hdr    = PD_MSGTYPE_REQUEST | PD_NUMOBJ(1);
    request->obj[0] = PD_RDO_FV_MAX_CURRENT_SET(DPM_MIN_CURRENT) | PD_RDO_FV_CURRENT_SET(DPM_MIN_CURRENT) | PD_RDO_NO_USB_SUSPEND | PD_RDO_OBJPOS_SET(1);
    // We dont do usb
    // request->obj[0] |= PD_RDO_USB_COMMS;

    /* Update requested voltage */
    requested_voltage_mv = 5000;
  }
  // Even if we didnt match, we return true as we would still like to handshake on 5V at the minimum
  return true;
}

void pdbs_dpm_get_sink_capability(pd_msg *cap, const bool isPD3) {
  /* Keep track of how many PDOs we've added */
  // int numobj = 0;

  // /* If we have no configuration or want something other than 5 V, add a PDO
  //  * for vSafe5V */
  // /* Minimum current, 5 V, and higher capability. */
  // cap->obj[numobj++] = PD_PDO_TYPE_FIXED | PD_PDO_SNK_FIXED_VOLTAGE_SET(PD_MV2PDV(5000)) | PD_PDO_SNK_FIXED_CURRENT_SET(DPM_MIN_CURRENT);

  // /* Get the current we want */
  // uint16_t voltage = USB_PD_VMAX * 1000; // in mv
  // if (requested_voltage_mv != 5000) {
  //   voltage = requested_voltage_mv;
  // }
  // uint16_t current = (voltage) / TIP_RESISTANCE; // In centi-amps

  // /* Add a PDO for the desired power. */
  // cap->obj[numobj++] = PD_PDO_TYPE_FIXED | PD_PDO_SNK_FIXED_VOLTAGE_SET(PD_MV2PDV(voltage)) | PD_PDO_SNK_FIXED_CURRENT_SET(current);

  // /* Get the PDO from the voltage range */
  // int8_t i = dpm_get_range_fixed_pdo_index(cap);

  // /* If it's vSafe5V, set our vSafe5V's current to what we want */
  // if (i == 0) {
  //   cap->obj[0] &= ~PD_PDO_SNK_FIXED_CURRENT;
  //   cap->obj[0] |= PD_PDO_SNK_FIXED_CURRENT_SET(current);
  // } else {
  //   /* If we want more than 5 V, set the Higher Capability flag */
  //   if (PD_MV2PDV(voltage) != PD_MV2PDV(5000)) {
  //     cap->obj[0] |= PD_PDO_SNK_FIXED_HIGHER_CAP;
  //   }

  //   /* If the range PDO is a different voltage than the preferred
  //    * voltage, add it to the array. */
  //   if (i > 0 && PD_PDO_SRC_FIXED_VOLTAGE_GET(cap->obj[i]) != PD_MV2PDV(voltage)) {
  //     cap->obj[numobj++] = PD_PDO_TYPE_FIXED | PD_PDO_SNK_FIXED_VOLTAGE_SET(PD_PDO_SRC_FIXED_VOLTAGE_GET(cap->obj[i])) | PD_PDO_SNK_FIXED_CURRENT_SET(PD_PDO_SRC_FIXED_CURRENT_GET(cap->obj[i]));
  //   }

  //   /* If we have three PDOs at this point, make sure the last two are
  //    * sorted by voltage. */
  //   if (numobj == 3 && (cap->obj[1] & PD_PDO_SNK_FIXED_VOLTAGE) > (cap->obj[2] & PD_PDO_SNK_FIXED_VOLTAGE)) {
  //     cap->obj[1] ^= cap->obj[2];
  //     cap->obj[2] ^= cap->obj[1];
  //     cap->obj[1] ^= cap->obj[2];
  //   }
  //   /* If we're using PD 3.0, add a PPS APDO for our desired voltage */
  //   if ((hdr_template & PD_HDR_SPECREV) >= PD_SPECREV_3_0) {
  //     cap->obj[numobj++]
  //         = PD_PDO_TYPE_AUGMENTED | PD_APDO_TYPE_PPS | PD_APDO_PPS_MAX_VOLTAGE_SET(PD_MV2PAV(voltage)) | PD_APDO_PPS_MIN_VOLTAGE_SET(PD_MV2PAV(voltage)) |
  //         PD_APDO_PPS_CURRENT_SET(PD_CA2PAI(current));
  //   }
  // }

  // /* Set the unconstrained power flag. */
  // if (_unconstrained_power) {
  //   cap->obj[0] |= PD_PDO_SNK_FIXED_UNCONSTRAINED;
  // }
  // /* Set the USB communications capable flag. */
  // cap->obj[0] |= PD_PDO_SNK_FIXED_USB_COMMS;

  // /* Set the Sink_Capabilities message header */
  // cap->hdr = hdr_template | PD_MSGTYPE_SINK_CAPABILITIES | PD_NUMOBJ(numobj);
}

#endif