mirror of
https://github.com/Ralim/IronOS.git
synced 2025-07-23 12:23:06 +02:00
88 lines
3.5 KiB
C
88 lines
3.5 KiB
C
#ifndef OPERATING_MODES_H_
|
|
#define OPERATING_MODES_H_
|
|
|
|
extern "C" {
|
|
#include "FreeRTOSConfig.h"
|
|
}
|
|
#include "Buttons.hpp"
|
|
#include "OLED.hpp"
|
|
#include "OperatingModeUtilities.h"
|
|
#include "Settings.h"
|
|
#include "TipThermoModel.h"
|
|
#include "Translation.h"
|
|
#include "Types.h"
|
|
#include "cmsis_os.h"
|
|
#include "configuration.h"
|
|
#include "history.hpp"
|
|
#include "main.hpp"
|
|
#include "power.hpp"
|
|
#include "settingsGUI.hpp"
|
|
#include "stdlib.h"
|
|
#include "string.h"
|
|
#ifdef POW_PD
|
|
#include "USBPD.h"
|
|
#include "pd.h"
|
|
#endif
|
|
|
|
enum class OperatingMode {
|
|
StartupLogo=10, // Showing the startup logo
|
|
CJCCalibration=11, // Cold Junction Calibration
|
|
StartupWarnings=12, // Startup checks and warnings
|
|
InitialisationDone=13, // Special state we use just before we to home screen at first startup. Allows jumping to extra startup states
|
|
HomeScreen=0, // Home/Idle screen that is the main launchpad to other modes
|
|
Soldering=1, // Main soldering operating mode
|
|
SolderingProfile=6, // Soldering by following a profile, used for reflow for example
|
|
Sleeping=3, // Sleep state holds iron at lower sleep temp
|
|
Hibernating=14, // Like sleeping but keeps heater fully off until woken
|
|
SettingsMenu=4, // Settings Menu
|
|
DebugMenuReadout=5, // Debug metrics
|
|
TemperatureAdjust=7, // Set point temperature adjustment
|
|
UsbPDDebug=8, // USB PD debugging information
|
|
ThermalRunaway=9, // Thermal Runaway warning state.
|
|
};
|
|
|
|
enum class TransitionAnimation {
|
|
None = 0,
|
|
Right = 1,
|
|
Left = 2,
|
|
Down = 3,
|
|
Up = 4,
|
|
};
|
|
|
|
// Generic context struct used for gui functions to be able to retain state
|
|
struct guiContext {
|
|
TickType_t viewEnterTime; // Set to ticks when this view state was first entered
|
|
OperatingMode previousMode;
|
|
TransitionAnimation transitionMode;
|
|
// Below is scratch state, this is retained over re-draws but blown away on state change
|
|
struct scratch {
|
|
uint16_t state1; // 16 bit state scratch
|
|
uint16_t state2; // 16 bit state scratch
|
|
uint32_t state3; // 32 bit state scratch
|
|
uint32_t state4; // 32 bit state scratch
|
|
uint16_t state5; // 16 bit state scratch
|
|
uint16_t state6; // 16 bit state scratch
|
|
uint32_t state7; // 32 bit state scratch
|
|
|
|
} scratch_state;
|
|
};
|
|
|
|
// Main functions
|
|
OperatingMode gui_SolderingSleepingMode(const ButtonState buttons, guiContext *cxt); // Sleep mode
|
|
OperatingMode gui_solderingMode(const ButtonState buttons, guiContext *cxt); // Main mode for hot pointy tool
|
|
OperatingMode gui_solderingTempAdjust(const ButtonState buttons, guiContext *cxt); // For adjusting the setpoint temperature of the iron
|
|
OperatingMode drawHomeScreen(const ButtonState buttons, guiContext *cxt); // IDLE / Home screen
|
|
OperatingMode gui_SettingsMenu(const ButtonState buttons, guiContext *cxt); //
|
|
|
|
OperatingMode gui_solderingProfileMode(const ButtonState buttons, guiContext *cxt); // Profile mode for hot likely-not-so-pointy tool
|
|
OperatingMode performCJCC(const ButtonState buttons, guiContext *cxt); // Used to calibrate the Cold Junction offset
|
|
OperatingMode showDebugMenu(const ButtonState buttons, guiContext *cxt); // Debugging values
|
|
OperatingMode showPDDebug(const ButtonState buttons, guiContext *cxt); // Debugging menu that shows PD adaptor info
|
|
OperatingMode showWarnings(const ButtonState buttons, guiContext *cxt); // Shows user warnings if required
|
|
|
|
// Common helpers
|
|
int8_t getPowerSourceNumber(void); // Returns number ID of power source
|
|
|
|
extern uint8_t heaterThermalRunawayCounter;
|
|
#endif
|